Search bioRxiv⌕ Search
Home/Archive/bioRxiv

bioRxiv · 10.1101/2023.07.08.547691

The Use of Fluid-phase 3D Printing to Pattern Alginate-gelatin Hydrogel Properties to Guide Cell Growth and Behaviour In Vitro

Souza, A.·McCarthy, K.·Rodriguez, B. J.·REYNAUD, E. G.
View original source ↗Export metadata ↓

Abstract

3D (bio)printing technology has boosted the advancement of the biomedical field. However, tissue engineering is in its infancy and (bio)printing biomimetic constructions for tissue formation in vitro is still a default. As a new methodology to improve in vitro studies, we suggest the use of a cross-linkable aqueous support bath to pattern the characteristics of the scaffolds during the 3D printing process. Using fluid-phase, different molecules can be added to specific locations of the substrate promoting cell behaviour guidance and compartmentalization. Moreover, mechanical aspects can be customized by changing the type or concentration of the solution in which the (bio)printing is acquired. In this study, we first assessed different formulations of alginate/gelatin to improve cell colonization in our printings. On formulations with lower gelatin content, the U2OS cells increased 2.83 times the cell growth. In addition, the alginate-gelatin hydrogel presented a good printability in both air and fluid-phase, however the fluid-phase printings showed better printing fidelity as it diminished the collapsing and the spreading of the hydrogel strand. Next, the fluid-phase methodology was used to guide cell colonization in our printings. First, different stiffness were created by crosslinking the hydrogel with different concentrations of CaCl2 during the printing process. As a result, the U2OS cells were compartmentalized on the stiffer parts of the printings. In addition, using fluid-phase to add RGD molecules to specific parts of the hydrogel has also promoted guidance on cell growth. Finally, our results showed that by combining stiffer alginate-gelatin hydrogel with RGD increasing concentrations we can create a synergetic effect and boost cell growth by up to 3.17-fold. This work presents a new printing process for tailoring multiple parameters in hydrogel substrates by using fluid-phase to generate a more faithful replication of the in vivo environment.

Explore related subjects

bioengineeringPreprint

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Souza, A., McCarthy, K., Rodriguez, B. J., REYNAUD, E. G.. 2023-07-08. The Use of Fluid-phase 3D Printing to Pattern Alginate-gelatin Hydrogel Properties to Guide Cell Growth and Behaviour In Vitro. https://doi.org/10.1101/2023.07.08.547691

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related preprints

bioRxiv2026

Synergy-informed bilevel optimization reveals joint-specific benefits for realistic exoskeleton torque prediction

Simulation-driven optimization can guide exoskeleton control design, but its utility is limited by the accuracy with which muscle coordination is predicted. Strict effort-minimization formulations predict non-physiological muscle shutdown under high exoskeleton assistance, leading to peak assistive torques that exceed values reported in human-in-the-loop experiments. We evaluated the accuracy of synergy-informed simulations at predicting assistance across four single-joint exoskeleton configurations: ankle plantarflexion, knee extension, hip flexion, and hip abduction. We implemented a bilevel optimization to predict a parameterized assistive torque that minimizes metabolic cost, with assisted muscle dynamics estimated via either effort-minimization simulations (minimizing muscle effort only) or synergy-informed simulations (minimizing muscle effort constrained to a synergy structure). We used experimental data from five unimpaired adults walking at their preferred speed and compared results descriptively between the two formulations within each subject. Assistance based on effort-minimization simulations shut down agonist muscle activations and overestimated peak assistive torque compared with experimental values. In contrast, constraining muscle controls to a synergy structure prevented non-physiological muscle shutdown and yielded assistive torques closer to those measured in human-in-the-loop experiments. This benefit was not observed equally across all assisted degrees of freedom or subjects, emerging only where no single synergy could be suppressed to unload the assisted muscles. Synergy weights can therefore be interpreted as joint-specific predictors of when simulations can reliably inform wearable robot design.

bioengineering↗
bioRxiv2026

Engineered microvessel networks -- Longitudinal transcriptomic profiling validates chip-grown tissues as a robust model for studying vasculature

Vascularised Organ-on-Chip (OoC) models are promising New Approach Methodologies (NAMs), but their translation requires validation for defined Contexts of Use (CoU). Here, we combine microfluidic microvessel networks (MVNs) with longitudinal bulk and single-cell RNA sequencing to determine how cell provenance influences engineered vascular phenotype. Stromal cell identity produced distinct network architectures and transcriptional trajectories, demonstrating that support cells, commonly treated as interchangeable, represent an important CoU variable. Primary human pancreatic microvascular endothelial cells failed to form stable perfusable networks, but supplementation with 10% Human Umbilical Vein Endothelial Cells (HUVECs) or Blood Outgrowth Endothelial Cells (BOECs) rescued self-assembly. Single-cell transcriptomics identified specialised endothelial populations associated with vascular morphogenesis, including tip, stalk, phalanx, endothelial to mesenchymal transition (EndMT) and pericyte-like endothelial cells. Failed networks lacked coherent endothelial specialisation, whereas rescued networks restored stabilising cell states and revealed FLRT2--UNC5B signalling within pericyte-like HUVECs, recapitulating a pathway implicated in angiogenic development in vivo. These findings establish cell provenance as a critical determinant of microvascular NAM performance and demonstrate how transcriptomic validation can define and strengthen the biological relevance of microvessel-on-chip models for specific CoUs.

bioengineering↗
bioRxiv2026

Benchmarking foundation models for resting-state functional magnetic resonance imaging time series in cognitive aging research

Foundation models trained on large neuroimaging datasets could help smaller studies investigate cognition from brain recordings. However, whether the foundation model-derived representations improve assessment of current cognition, prediction of follow-up cognition, or characterization of cognitive change remains unclear. We evaluated nine configurations from five model families that process regional resting-state functional magnetic resonance imaging time series, using 3,103 scans from 1,653 participants across two observational and five intervention aging cohorts. Primary frozen representations showed no consistent superiority over conventional functional connectivity for concurrent cognitive associations or diagnostic classification. Changing the readout improved selected concurrent cognitive associations without updating model weights, indicating that performance depended partly on how representations were extracted. Additional post-training and embedding alignment yielded gains in selected settings but did not consistently improve performance across outcomes. In the primary longitudinal analyses, imaging representations did not establish added value beyond baseline clinical measures. These findings show that readout choice influences concurrent cognitive associations, while the added value of these representations for longitudinal outcomes remains unestablished.

bioengineering↗