Biology subjects

Schur, F. K.

Publications and source records attributed to Schur, F. K..

15 recordsLinked to original sources

bioRxiv2026

Retroviral CA subdomains encode their immature assembly properties independently of strict subdomain co-pairing

Retroviral capsid (CA) proteins display a conserved two-domain architecture consisting of independently folded N-terminal (CA-NTD) and a C-terminal (CA-CTD) subdomains. Despite a strong CA protein fold conservation, different retrovirus species are employing remarkably variable geometrical solutions to stabilize the CA lattices that form the immature virus particle. For instance, while HTLV-1 has been reported to use the CA-NTD to stabilize its immature lattice, HIV-1 relies on a contiguous structural unit formed of the CA-CTD together with the short spacer peptide 1 (SP1). This raises the question whether immature assembly phenotypes are modular features encoded independently into individual CA subdomains, or if they are emergent features requiring strict co-pairing or co-evolution between CA subdomains of a given species. To test for these two options, we have designed chimeric proteins pairing the CA subdomains of HTLV-1 and HIV-1. Our results show that the CA subdomains of HIV-1 and HTLV-1 can be clearly distinguished into assembly-passive and assembly-driving categories. Moreover, pairing assembly-driving subdomains from the two retrovirus species still allows them to independently form their native immature contacts, while at the same time trying to impose their preferred curvature on each other. Mutations of either subdomain within the chimeric context do not disrupt assembly, but rather shift the phenotype balance while relieving curvature strains, demonstrating that all immature assembly properties can be encoded into a single subdomain. Our results therefore highlight that the two-domain architecture of retroviral capsid is a result of a division of labor approach built on structural modularity, where, at least for immature assembly, one of the subdomains is the key driver for assembly competence while the other could serve more regulatory functions.

microbiology↗

bioRxiv2025

Azimuthal Segment Imaging in cryo-STEM Tomography

Cryo-electron microscopy is transitioning from investigation of isolated macromolecules to in situ studies bridging the realms of structural and cellular biology. Newly available detector technologies enable unconventional contrast modes with particular advantages. Here we demonstrate application of quadrant diode detectors to visualize a range of biological specimens by cryo-Scanning Transmission Electron Tomography (cryo-STET). Theoretically, we decompose coherent contrast by parallax analysis to isolate phase and amplitude contributions in specimens too thick for energy-filtered TEM. We thereby expand the cryo-STEM toolchest to parallax-filtered bright field (pBF) and parallax-filtered integrated differential phase contrast ({pi}DPC) and demonstrate their advantages in tomography using T4-bacteriophages, whole cells, and cryo-lift-out lamellae of cellular multilayers. The results show significant improvements over traditional STEM modalities in a realm where conventional wide-field transmission EM imaging methods are not applicable. The commercial availability of such detectors and the relative ease and speed of image reconstruction should make this realm accessible to the broader community in life science EM and beyond. TeaserParallax-corrected cryo-STET imaging provides coherent phase and amplitude contrast of thick biological specimens.

cell biology↗

bioRxiv2025

Evolutionary repurposing of a DNA segregation machinery into a cytoskeletal system controlling cyanobacterial cell shape

Bacteria, like eukaryotes, use conserved cytoskeletal systems for intracellular organization. The plasmid-encoded ParMRC system forms actin-like filaments that segregate low-copy plasmids. In multicellular cyanobacteria like Anabaena sp., we found that a chromosomally-encoded ParMR has evolved into a novel cytoskeleton-termed CorMR-with a function in cell shape control rather than DNA segregation. Using live-cell imaging, in vitro reconstitution and Cryo-EM, we demonstrate that CorM forms dynamically unstable, antiparallel double-stranded filaments, which are recruited to the membrane by CorR via an amphipathic helix conserved in multicellular cyanobacteria. CorMR filaments are regulated by MinC, which excludes them from the poles and division plane. Comparative genomics reveal that the repurposing of ParMR and Min systems co-evolved with cyanobacterial multicellularity, highlighting the evolutionary plasticity of cytoskeletal systems in bacteria.

microbiology↗

bioRxiv2025

Image-based 3D active sample stabilization on the nanometer scale for optical microscopy

Super-resolution microscopy often entails long acquisition times of minutes to hours. Since drifts during the acquisition adversely affect data quality, active sample stabilization is commonly used for some of these techniques to reach their full potential. While drifts in the lateral plane can often be corrected after acquisition, this is not always possible or may come with drawbacks. Therefore, it is appealing to stabilize sample position in three dimensions during acquisition. Various schemes for active sample stabilization have been demonstrated previously, with some reaching sub-nm stability in three dimensions. However, these high-performance implementations significantly added to the complexity of the hardware and/or sample preparation. Here, we present a scheme for active drift correction that delivers the nm-scale 3D stability demanded by state-of-the-art super-resolution techniques and is straightforward to implement. Using a refined algorithm that does not depend on sparse peaks typically provided by fiducial markers added to the sample, we stabilized our sample position to [~]1 nm in 3D using objective lenses both with high and low numerical aperture. Our implementation requires only the addition of a standard widefield imaging path and we provide an open-source control software with graphical user interface to facilitate easy adoption of the module. Finally, we demonstrate how this has the potential to enhance data collection for diffraction-limited and super-resolution imaging techniques using single-molecule localization microscopy and cryo-confocal imaging as showcases. Why it mattersSuper-resolution light microscopy has enabled the visualization of biological structures down to the nm-scale. However, uncorrected drifts during often extended acquisition times may adversely affect data quality. Active drift correction in three dimensions has achieved sub-nm stabilization, but state-of-the-art techniques come with considerable overhead on sample preparation and/or hardware. Here, we demonstrate an image-based stabilization scheme which allows for flexibility regarding structures used for stabilization and is straightforward to adopt. Using a maximally simple implementation, we stabilized the position of our sample to around 1 nm over extended acquisition times and demonstrated usefulness in two example imaging settings where sample drifts are critical, super-resolution single-molecule localization microscopy and confocal imaging at cryogenic temperatures.

biophysics↗

bioRxiv2023

Unveiling the ultrastructural landscape of native extracellular matrix via lift-out cryo-FIBSEM and cryo-ET

The extracellular matrix (ECM) is a highly hydrated, three-dimensional network composed of various macromolecules and signaling factors. It serves as a structural scaffold for cells and plays an essential role in the regulation of numerous cellular processes, including cell migration, adhesion, and proliferation. Despite its importance in metazoans, structural knowledge is rudimentary on how the components of the matrisome are secreted, remodeled, and interact with each other and with surrounding cells. Specifically, the exact molecular assembly of important ECM fibers, such as fibronectin fibrils, fibrillin microfibrils, or Collagen-VI filaments has remained enigmatic. This is largely due to methodological limitations in specimen preparation for conventional room-temperature electron microscopy (EM). To overcome these limitations, we have developed a cell culture-based 3D-ECM platform compatible with sample thinning by cryo-lift out focused ion beam (FIB) milling and cryo-electron tomography (cryo-ET). Our workflow involves the implementation of cell-derived matrices (CDMs) grown on EM grids, resulting in a highly adaptable and versatile tool to closely mimic ECM environments. This allows us to visualize native ECM and its components for the first time in their fully hydrated, cellular context. Our data reveals an intricate network of ECM fibers and their positioning with respect to matrix-secreting cells. In addition to D-spaced collagen fibers, we visualize previously unresolved fibrous structures, and an amorphous matrix co-assembling in proximity to ECM fibers and delineating the boundary between ECM and empty extra-cellular space. Intra- and extracellular granules presumably represent assembly intermediates of the ECM. Our results add to the structural atlas of the ECM and provide novel insights into ECM secretion, assembly and maintenance.

cell biology↗

bioRxiv2023

Unconventional stabilization of the human T-cell leukemia virus type 1 immature Gag lattice

Human T-cell leukemia virus type 1 (HTLV-1) has an atypical immature particle morphology compared to other retroviruses. This indicates that these particles are formed in a way that is unique. Here we report the results of cryo-electron tomography (cryo-ET) studies of HTLV-1 virus-like particles (VLPs) assembled in vitro, as well as derived from cells. This work shows that HTLV-1 employs an unconventional mechanism of Gag-Gag interactions to form the immature viral lattice. Analysis of high-resolution structural information from immature CA tubular arrays reveals that the primary stabilizing component in HTLV-1 is CA-NTD. Mutagenesis and biophysical analysis support this observation. This distinguishes HTLV-1 from other retroviruses, in which the stabilization is provided primarily by the CA-CTD. These results are the first to provide structural details of the quaternary arrangement of Gag for an immature deltaretrovirus, and this helps explain why HTLV-1 particles are morphologically distinct.

molecular biology↗

bioRxiv2023

Multi-modal cryo-EM reveals trimers of protein A10 to form the palisade layer in poxvirus cores

Poxviruses are among the largest double-stranded DNA viruses with members such as Variola virus, Monkeypox virus and the famous vaccination strain Vaccinia virus (VACV). Knowledge about the structural proteins that form the viral core, found in all infectious poxvirus forms, has remained sparse. While major core proteins have been annotated via indirect experimental evidence, their structures have remained elusive and they could not be assigned to the individual architectural features of the core. Hence, which proteins constitute which layers of the core, such as the so-called palisade layer and the inner core wall has remained enigmatic. Here, we have performed a multi-modal cryo-electron microscopy (cryo-EM) approach to elucidate the structural determinants of the VACV core. In combination with molecular modeling using AlphaFold, we unambiguously identify trimers formed by the cleavage product of A10 as the key component of the palisade layer. This allows us to place previously-obtained descriptions of protein interactions within the core wall into perspective and to provide a substantially revised model of poxvirus core architecture. Importantly, we show that interactions within A10 trimers are likely identical among Poxviridae, implying that our structural observations should be generalizable over most, if not all members of this important virus family. One sentence summarySingle-particle cryo-EM, cryo-electron tomography, and AlphaFold modeling reveal the structural architecture of the poxvirus core and identify trimers of protein A10 as the key component of the palisade layer.

molecular biology↗

bioRxiv2023

The phenuivirus Toscana virus makes an atypical use of vacuolar acidity to enter host cells

Toscana virus is a major cause of arboviral disease in humans in the Mediterranean basin during summer. However, early virus-host cell interactions and entry mechanisms remain poorly characterized. Investigating iPSC-derived human neurons and cell lines, we found that virus binding to the cell surface was specific but inefficient, and 50% of bound virions were endocytosed within 10 min. Virions entered Rab5a+ early endosomes and, subsequently, Rab7a+ and LAMP-1+ late endosomal compartments. Penetration required intact late endosomes and occurred within 30 min following internalization. Virus entry relied on vacuolar acidification, with an optimal pH for viral membrane fusion at pH 5.5. The pH threshold increased to 5.8 with longer pre-exposure of virions to the slightly acidic pH in early endosomes. Strikingly, the particles remained infectious after entering late endosomes with a pH below the fusion threshold. Overall, our study establishes Toscana virus as a late-penetrating virus and reveals an atypical use of vacuolar acidity by this virus to enter host cells.

microbiology↗

bioRxiv2022

ArpC5 isoforms regulate Arp2/3 complex-dependent protrusion through differential Ena/VASP positioning

Tight regulation of Arp2/3 complex is required to allow productive nucleation of force-generating, branched actin networks. An emerging aspect of regulation is the incorporation of subunit isoforms into Arp2/3 complex. Specifically, both isoforms of the ArpC5 subunit, ArpC5 and ArpC5L, have been reported to fine-tune nucleation activity and branch junction stability. Elevated levels of ArpC5 have also been linked to increased cancer progression and metastasis. Here, we have combined genetic engineering of cells and cellular structural biology to describe how ArpC5 and ArpC5L differentially regulate cell migration. They do so by defining the structural stability of ArpC1 in branch junctions and, in turn, by determining protrusion characteristics, protein dynamics, and actin network ultrastructure. ArpC5 isoforms also have an impact on the positioning of actin assembly factors from the Ena/VASP family, which act downstream of Arp2/3 complex-mediated nucleation. This suggests that ArpC5 and Ena/VASP proteins, both predictors for poor outcome in cancer, are part of a signaling pathway enhancing cell migration and, by inference, metastasis.

cell biology↗

bioRxiv2022

Bimodally oriented cellulose fibers and reticulated homogalacturonan networks - A direct visualization of Allium cepa primary cell walls

One hallmark of plant cells is their pecto-cellulosic cell walls. They protect cells against the environment and high turgor and mediate morphogenesis through the dynamics of their mechanical and chemical properties. The walls are a complex polysaccharidic structure. Although their biochemical composition is well known, how the different components organize in the volume of the cell wall and interact with each other is not well understood and yet is key to the walls mechanical properties. To investigate the ultrastructure of the plant cell wall, we imaged the walls of onion (Allium cepa) bulbs in a near-native state via cryo-Focused Ion Beam milling (cryo-FIB-milling) and cryo-Electron Tomography (cryo-ET). This allowed the high-resolution visualization of cellulose fibers in situ (in muro). We reveal the coexistence of dense fiber fields bathed in a reticulated matrix we termed "meshing," which is more abundant at the inner surface of the cell wall. The fibers adopted a regular bimodal angular distribution at all depths in the cell wall and bundled according to their orientation, creating layers within the cell wall. Concomitantly, employing homogalacturonan (HG)-specific enzymatic digestion, we observed changes in the meshing, suggesting that it is at least in part composed of HG pectins. We propose the following model for the construction of the abaxial epidermal primary cell wall: The cell deposits successive layers of cellulose fibers at -45{degrees} and +45{degrees} relative to the cells long axis and secretes the surrounding HG-rich meshing proximal to the plasma membrane, which then migrates to more distal regions of the cell wall.

plant biology↗

bioRxiv2022

Exploring high-resolution cryo-ET and subtomogram averaging capabilities of contemporary DEDs

The potential of energy filtering and direct electron detection for cryo-electron microscopy (cryo-EM) image processing has been well documented for single particle analysis (SPA). Here, we assess the performance of recently introduced hardware for cryo-electron tomography (cryo-ET) and subtomogram averaging (STA), an increasingly popular structural determination method for complex 3D specimens. We acquired cryo-ET datasets of EIAV virus-like particles (VLPs) on two contemporary cryo-EM systems equipped with different energy filters and direct electron detectors (DED), specifically a Krios G4, equipped with a cold field emission gun (CFEG), Thermo Fisher Scientific Selectris X energy filter, and a Falcon 4 DED; and a Krios G3i, with a Schottky field emission gun (XFEG), a Gatan Bioquantum energy filter, and a K3 DED. We performed constrained cross-correlation-based STA on equally sized datasets acquired on the respective systems. The resulting EIAV CA hexamer reconstructions show that both systems perform comparably in the 4-6 [A] resolution range. In addition, by employing a recently introduced multiparticle refinement approach, we obtained a reconstruction of the EIAV CA hexamer at 2.9 [A]. Our results demonstrate the potential of the new generation of energy filters and DEDs for STA, and the effects of using different processing pipelines on their STA outcomes.

molecular biology↗

bioRxiv2021

Computational toolbox for ultrastructural quantitative analysis of filament networks in cryo-ET data

A precise quantitative description of the ultrastructural characteristics underlying biological mechanisms is often key to their understanding. This is particularly true for dynamic extra- and intracellular filamentous assemblies, playing a role in cell motility, cell integrity, cytokinesis, tissue formation and maintenance. For example, genetic manipulation or modulation of actin regulatory proteins frequently manifests in changes of the morphology, dynamics, and ultrastructural architecture of actin filament-rich cell peripheral structures, such as lamellipodia or filopodia. However, the observed ultrastructural effects often remain subtle and require sufficiently large datasets for appropriate quantitative analysis. The acquisition of such large datasets has been enabled by recent advances in high-throughput cryo-electron tomography (cryo-ET) methods. However, this also necessitates the development of complementary approaches to maximize the extraction of relevant biological information. We have developed a computational toolbox for the semi-automatic quantification of filamentous networks from cryo-ET datasets to facilitate the analysis and cross-comparison of multiple experimental conditions. GUI-based components simplify the manipulation of data and allow users to obtain a large number of ultrastructural parameters describing filamentous assemblies. We demonstrate the feasibility of this workflow by analyzing cryo-ET data of untreated and chemically perturbed branched actin filament networks and that of parallel actin filament arrays. In principle, the computational toolbox presented here is applicable for data analysis comprising any type of filaments in regular (i.e. parallel) or random arrangement. We show that it can ease the identification of key differences between experimental groups and facilitate the in-depth analysis of ultrastructural data in a time-efficient manner.

cell biology↗

bioRxiv2020

Structure of the mature Rous sarcoma virus lattice reveals a role for IP6 in the formation of the capsid hexamer

Inositol hexakisphosphate (IP6) is an assembly cofactor for HIV-1. We report here that IP6 is also used for assembly of Rous sarcoma virus (RSV), a retrovirus from a different genus. IP6 was [~]100-fold more potent at promoting RSV mature CA assembly than observed for HIV-1 and removal of IP6 in vivo reduced infectivity by 100-fold. By cryo-electron tomography and subtomogram averaging, mature virus-like particles (VLPs) showed an IP6-like density in the CA hexamer, coordinated by rings of six lysines and six arginines. Phosphate and IP6 had opposing effects on CA in vitro assembly, inducing formation of T=1 icosahedrons and tubes, respectively, implying that phosphate promotes pentamer and IP6 hexamer formation. Subtomogram averaging and classification optimized for analysis of pleomorphic retrovirus particles revealed that the heterogeneity of mature RSV CA polyhedrons results from an unexpected, intrinsic CA hexamer flexibility. In contrast, the CA pentamer forms rigid units organizing the local architecture. These different features of hexamers and pentamers determine the structural mechanism to form CA polyhedrons of variable shape in mature RSV particles.

molecular biology↗

bioRxiv2020

Novel cryo-electron tomography structure of Arp2/3 complex in cells reveals mechanisms of branch formation

The actin-related protein (Arp)2/3 complex nucleates branched actin filament networks pivotal for cell migration, endocytosis and pathogen infection. Its activation is tightly regulated and involves complex structural rearrangements and actin filament binding, which are yet to be understood. Here, we report a 9.0[A] resolution structure of the actin filament Arp2/3 complex branch junction in cells using cryo-electron tomography and subtomogram averaging. This allows us to generate an accurate model of the active Arp2/3 complex in the branch junction and its interaction with actin filaments. Our structure indicates a central role for the ArpC3 subunit in stabilizing the active conformation and suggests that in the branch junction relocation of the ArpC5 N-terminus and the C-terminal tail of Arp3 is important to fix Arp2 and Arp3 in an actin dimer-like conformation. Notably, our model of the branch junction in cells significantly differs from the previous in vitro branch junction model.

cell biology↗

bioRxiv2020

3D printed cell culture grid holders for improved cellular specimen preparation in cryo-electron microscopy

Cryo-electron microscopy (cryo-EM) of cellular specimens provides insights into biological processes and structures within a native context. However, a major challenge still lies in the efficient and reproducible preparation of adherent cells for subsequent cryo-EM analysis. This is due to the sensitivity of many cellular specimens to the varying seeding and culturing conditions required for EM experiments, the often limited amount of cellular material and also the fragility of EM grids and their substrate. Here, we present low-cost and reusable 3D printed grid holders, designed to improve specimen preparation when culturing challenging cellular samples directly on grids. The described grid holders increase cell culture reproducibility and throughput, and reduce the resources required for cell culturing. We show that grid holders can be integrated into various cryo-EM workflows, including micro-patterning approaches to control cell seeding on grids, and for generating samples for cryo-focused ion beam milling and cryo-electron tomography experiments. Their adaptable design allows for the generation of specialized grid holders customized to a large variety of applications.

cell biology↗