Biology subjects

Halvorsen, K.

Publications and source records attributed to Halvorsen, K..

15 recordsLinked to original sources

bioRxiv2026

Ligation-assisted target recycling for DNA nanoswitch biosensors

Conformationally responsive DNA nanoswitches have previously been developed and validated for a variety of biosensing applications including detection of DNA, microRNA, and viral RNA/DNA. Here we develop new methodology for enhancing the sensitivity of DNA-based sensing by recycling a fixed number of targets for repeated reuse. We achieved target-dependent enzymatic ligation of looped nanoswitches and showed that subsequent removal of target does not affect the ligated loop. Through cyclic annealing, ligation, and target removal, we can linearly control signal amplification up to hundreds of cycles. This method adds an important new capability for low abundance targets without the need for target amplification.

biochemistry↗

bioRxiv2026

Aptamer-based DNA nanoswitches for multiplexed protein detection

Simple, modular platforms for detecting biologically relevant proteins are critical for applications in clinical diagnostics, healthcare, and research. Here, we have combined aptamer-based protein recognition with our conformationally-responsive DNA nanoswitches to enable simple, sensitive and specific protein detection. We demonstrate dual detection of two clinically relevant blood proteins, thrombin and VEGF as initial proof of concept.

bioengineering↗

bioRxiv2026

A 3D printed mini-gel electrophoresis system for rapid and inexpensive DNA nanoswitch biosensing

Gel electrophoresis has been a cornerstone laboratory technique for decades, yet it is often viewed as cumbersome, costly, and has remained confined to laboratory settings. Recent advances in DNA nanotechnology have repurposed electrophoresis as a primary readout for some biosensing applications such as DNA nanoswitches, where a conformational change in a DNA structure indicates the presence of a target molecule. Conventional gel electrophoresis setups not ideal for such targeted applications, with moderate equipment cost, excessive reagent use, and time-consuming processes. Here, we adopt a reductionist, application-driven approach to redesign gel electrophoresis specifically for DNA nanoswitch-based detection. We present a fully 3D-printable mini gel electrophoresis system that incorporates conductive plastic electrodes, demonstrating performance comparable to conventional systems using platinum electrodes. By optimizing the inter-electrode distance and running parameters, our system resolves the on/off states of DNA nanoswitches in as little as one minute. We further show that the device operates reliably at low voltages, including when powered by a USB power bank, and even enables instrument-free nanoswitch readout using an LED with a cell-phone camera. Our design substantially reduces the cost, voltage requirements, material usage, operational complexity, and experiment time. These improvements make gel-based biosensing more practical outside traditional laboratory environments, paving the way for broader adoption of gel electrophoresis in point-of-care and resource-limited settings.

biochemistry↗

bioRxiv2025

Investigating polarity effects in DNA base stacking

Nucleic acid structures are stabilized by both base pairing and base stacking. While energetics of base pairing interactions are relatively well established, our understanding of the energetic contributions of base stacking remain incomplete. Here, we use a combination of single-molecule and computational biophysics approaches to investigate the effect of strand polarity on base-stacking energetics. We designed pairs of DNA constructs with reversed stacking polarities at nick sites, along with corresponding no-stack controls to isolate stacking contributions. Performing single-molecule force-clamp assays with a Centrifuge Force Microscope (CFM), we observed polarity-dependent differences in stacking energetics. These differences were most pronounced in purine-purine and certain purine-pyrimidine interactions. Notably, a 5' purine stacked on a 3' pyrimidine was generally more stable than the reverse polarity. We employed molecular dynamics (MD) simulations to observe stacking interfaces in the DNA constructs. The simulations were qualitatively consistent with our experiments, and showed positional differences between opposite polarity stacking pairs, giving some insight into the origin of these polarity differences. Overall, these results demonstrate that base polarity can modulate stacking stability and should be considered when designing short duplex regions such as overhangs in molecular biology and biotechnology applications.

biophysics↗

bioRxiv2024

Influence of metal ions on the isothermal self-assembly of DNA nanostructures

DNA nanostructures are typically assembled by thermal annealing in buffers containing magnesium. We demonstrate the assembly of DNA nanostructures at constant temperatures ranging from 4 {degrees}C to 50 {degrees}C in solutions containing different metal ions. The choice of metal ions and the assembly temperature influence the isothermal assembly of several DNA motifs and designed three-dimensional DNA crystals. Molecular dynamics simulations show more fluctuations of the DNA structure in select monovalent ions (Na+ and K+) compared to divalent ions (Mg2+ and Ca2+). A key highlight is the successful assembly of DNA motifs in nickel-containing buffer at temperatures below 40 {degrees}C, otherwise unachievable at higher temperatures, or using an annealing protocol. DNA nanostructures isothermally assembled in different ions do not affect the viability of fibroblasts, myoblasts, and myotubes and or the immune response in myoblasts. The use of ions other than the typically-used magnesium holds key potential in biological and materials science applications that require minimal amounts of magnesium.

bioengineering↗

bioRxiv2024

Tuning the stability of DNA tetrahedra with base-stacking interactions

DNA nanotechnology relies on programmable anchoring of regions of single-stranded DNA through base pair hybridization to create nanoscale objects such as polyhedra, tubes, sheets, and other desired shapes. Recent work from our lab measured the energetics of base-stacking interactions and suggested that terminal stacking interactions between two adjacent strands could be an additional design parameter for DNA nanotechnology. Here, we explore that idea by creating DNA tetrahedra held together with sticky ends that contain identical base pairing interactions but different terminal stacking interactions. Testing all 16 possible combinations, we found that the melting temperature of DNA tetrahedra varied by up to 10 {degrees}C from altering a single base stack in the design. These results can inform stacking design to control DNA tetrahedra stability in a substantial and predictable way. To that end, we show that a 4 bp sticky end with weak terminal stacking does not form stable tetrahedra, while strengthening the stacks confers high stability with a 46.8 {+/-} 1.2 {degrees}C melting temperature, comparable to a 6 bp sticky end with weak stacking (49.7 {+/-} 2.9 {degrees}C). The results likely apply to other types of DNA nanostructures and suggest that terminal stacking interactions play an integral role in formation and stability of DNA nanostructures.

bioengineering↗

bioRxiv2023

The role of size in biostability of DNA tetrahedra

The potential for using DNA nanostructures for drug delivery applications requires understanding and ideally tuning their biostability. Here we investigate how biological degradation varies with size of a DNA nanostructure. We designed DNA tetrahedra of three edge lengths ranging from 13 to 20 bp and analyzed nuclease resistance for two nucleases and biostability in fetal bovine serum. We found that DNase I had similar digestion rates across sizes but appeared to incompletely digest the smallest tetrahedron, while T5 exonuclease was notably slower to digest the largest tetrahedron. In fetal bovine serum, the 20 bp tetrahedron was degraded ~four times faster than the 13 bp. These results show that DNA nanostructure size can influence nuclease degradation, but suggest a complex relationship that is nuclease specific.

synthetic biology↗

bioRxiv2022

Quantifying individual base stacking energies with the Centrifuge Force Microscope

Base stacking interactions between adjacent bases in DNA and RNA are known to be important for many biological processes, for drug development, and in other biotechnology applications. While previous work has estimated base stacking energies between pairs of bases, the individual contributions of each base to the stacking interaction has remained unknown. Here, we developed a novel methodology using a custom Centrifuge Force Microscope to perform high-throughput single molecule experiments to measure base stacking energies between individual adjacent bases. We found stacking energies strongest between purines (G|A at -2.3 {+/-} 0.2 kcal/mol) and weakest between pyrimidines (C|T at -0.4 {+/-} 0.1 kcal/mol). Hybrid stacking with phosphorylated, methylated, and RNA bases had no measurable effect, but a fluorophore modification reduced stacking energy. The implications of the work are demonstrated with three applications. We experimentally show that base stacking design can influence assembly and stability of a DNA nanostructure, modulate kinetics of enzymatic ligation, and determine accuracy of force fields in molecular dynamics (MD) simulations. Our results provide new insights into fundamental DNA interactions that are critical in biology and can inform rational design in diverse biotechnology applications.

biophysics↗

bioRxiv2021

Detection of Alzheimer's associated microRNAs using a DNA-based smart reagent

Alzheimers disease (AD) is the most common neurodegenerative disorder, with significant research efforts devoted to identifying new biomarkers for clinical diagnosis and treatment. MicroRNAs have emerged as likely disease regulators and biomarkers for AD, now implicated as having roles in several biological processes related to progression of the disease. In this work, we use the miRacles assay (microRNA activated conditional looping of engineered switches) for single-step detection of AD-related microRNAs. The technology is based on conformationally responsive DNA nanoswitches that loop upon recognition of a target microRNA and report their on/off status through an electrophoretic readout. Unlike many other methods, our approach directly detects native microRNAs without amplification or labeling, eliminating the need for expensive enzymes, reagents, and equipment. We used this assay to screen for AD-related microRNAs, demonstrate specificity within a microRNA family, sensitivity of [~] 8 fM, and multiplexing capability to simultaneously detect four microRNA targets. Toward clinical use, we provide proof-of-concept detection and quantifiable dysregulation of specific microRNAs from total RNA extracts derived from healthy and AD brain samples. In the context of AD, this "smart reagent" could facilitate biomarker discovery, accelerate efforts to understand the role of microRNAs in AD, and have clinical potential as a diagnostic or monitoring tool for validated biomarkers.

bioengineering↗

bioRxiv2020

DNA nanoswitch barcodes for multiplexed biomarker profiling

The detection of molecular biomarkers plays a key role in the clinic, aiding in diagnostics and prognostics, and in the research laboratory, contributing to our basic understanding of diseases. The ability to detect multiple and diverse molecular biomarkers within a single accessible assay would have great utility, providing a more comprehensive picture for clinical evaluation and research, but is a challenge with standard methods. One promising approach is the use of dynamic DNA nanostructures that can respond to molecular biomarkers, which have recently been used in a variety of biosensing strategies. In this work, we report the use of programmable DNA nanoswitches for the multiplexed detection of up to 6 biomarkers within a single pot through the use of a barcoded gel-based readout. We demonstrate the barcoding capability using gene fragments that correspond to 6 different diseases, with each fragment or combination of fragments producing a unique barcode signature. As a defining feature of our method, we show "mixed multiplexing" for simultaneous barcoded detection of different types of biomolecules - DNA, RNA, antibody and protein in a single assay. To demonstrate clinical potential, we show multiplexed detection of a prostate cancer biomarker panel in serum that includes two microRNA sequences and prostate specific antigen (PSA). This strategy holds promise in clinical diagnostics for profiling complex and diverse biomarker panels.

bioengineering↗

bioRxiv2020

Single species RNA purification with DNA nanoswitches

We report a novel method to purify individual RNA species using programmable DNA nanoswitches to facilitate RNA capture, release, and isolation. We validate sequence-based purification of microRNA, rRNA, and an mRNA fragment from total RNA, demonstrate multiplexing with two different RNA species, and show an application with downstream LC/MS analysis to identify RNA modifications. The simplicity, low cost, and low sample requirements of our method make it suitable for easy adoption.Competing Interest StatementLZ, ARC, and KH have intellectual property related to DNA nanoswitches. All other authors declare no competing interests.View Full Text

molecular biology↗

bioRxiv2020

The consequences of size-selective fishing mortality for larval production and sustainable yield in species with obligate male care

Size-based harvest limits or gear regulations are often used to manage fishing mortality and ensure the spawning biomass of females is sufficiently protected. Yet, management interactions with species’ mating systems that affect fishery sustainability and yield are rarely considered. For species with obligate male care, it is possible that size-specific harvest of males will decrease larval production. In order to examine how size-based management practices interact with mating systems, we modeled fisheries of two species with obligate care of nests, corkwing wrasse (Symphodus melops, Labridae) and lingcod (Ophiodon elongatus, Hexigrammidae) under two management scenarios, a minimum size limit and a harvest slot limit. We simulated the population dynamics, larval production, and yield to the fishery under a range of fishing mortalities. We also modeled size-dependent male care to determine its interaction with management. In both species, the slot limit decreased yield by less than 12% (relative to minimum size limits) at low fishing mortalities; at higher mortalities, individuals rarely survived to outgrow the slot and spawning potential decreased substantially relative to unfished levels, similar to minimum size limits. Spawning potential decreased less when managed with a slot limit if we included a positive feedback between male size, care, and hatching success, but the benefit of implementing the slot depended both on the relative proportions of each sex selected by the fishery, and on our assumptions regarding male size and care. This work highlights that the effects of size- and sex-selective fisheries management can be nuanced and produce counter-intuitive results.Competing Interest StatementThe authors have declared no competing interest.View Full Text

ecology↗

bioRxiv2020

Programmable low-cost DNA-based platform for viral RNA detection

Viral detection is critical for controlling disease spread and progression. Recent emerging viral threats including Zika, Ebola, and the current COVID-19 outbreak highlight the cost and difficulty in responding rapidly. To address these challenges, we develop a platform for low-cost and rapid detection of viral RNA with DNA nanoswitches designed to mechanically reconfigure in response to specific viruses. Using Zika virus as a model system, we show non-enzymatic detection of viral RNA to the attomole level, with selective and multiplexed detection between related viruses and viral strains. For clinical-level sensitivity in biological fluids, we paired the assay with a sample preparation step using either RNA extraction or isothermal pre-amplification. Our assay can be performed with minimal or no lab infrastructure, and is readily adaptable to detect other viruses. We demonstrate the adaptability of our method by quickly developing and testing DNA nanoswitches for detecting a fragment of SARS-CoV-2 RNA in human saliva. Given this versatility, we expect that further development and field implementation will improve our ability to detect emergent viral threats and ultimately limit their impact.

bioengineering↗

bioRxiv2019

Exceptional biostability of paranemic crossover (PX) DNA, crossover-dependent nuclease resistance, and implications for DNA nanotechnology

Inherent nanometer-sized features and molecular recognition properties make DNA a useful material in constructing nanoscale objects, with alluring applications in biosensing and drug delivery. However, DNA can be easily degraded by nucleases present in biological fluids, posing a considerable roadblock to realizing the full potential of DNA nanotechnology for biomedical applications. Here we investigated the nuclease resistance and biostability of the multi-stranded motif called paranemic crossover (PX) DNA and discovered a remarkable and previously unreported resistance to nucleases. We show that PX DNA has more than an order of magnitude increased resistance to degradation by DNase I, serum, and urine compared to double stranded DNA. We further demonstrate that the degradation resistance decreases monotonically as DNA crossovers are removed from the structure, suggesting that frequent DNA crossovers disrupt either the binding or catalysis of nucleases or both. Further, we show using mouse and human cell lines that PX DNA does not affect cell proliferation or interfere with biological processes such as myogenesis. These results have important implications for building DNA nanostructures with enhanced biostability, either by adopting PX-based architectures or by carefully engineering crossovers. We contend that such crossover-dependent nuclease resistance could potentially be used to add "tunable biostability" to the many features of DNA nanotechnology.

bioengineering↗

bioRxiv2018

Detection of cellular microRNAs with programmable DNA nanoswitches

MicroRNAs are short non-coding regulatory RNAs that are increasingly used as disease biomarkers. Detection of microRNAs can be arduous and expensive, and often requires amplification, labeling, or radioactive probes. Here we report a single-step, non-enzymatic detection assay using conformationally responsive DNA nanoswitches. Termed miRacles (microRNA activated conditional looping of engineered switches), our assay has sub-attomole sensitivity and single-nucleotide specificity using an agarose gel electrophoresis readout. We detect cellular microRNAs from nanogram-scale RNA extracts of differentiating muscle cells, and demonstrate multiplexed detection of several microRNAs from one biological sample. We demonstrate one-hour detection without expensive equipment or reagents, making this assay a compelling alternative to qPCR and Northern blotting.\n\nSignificance statementDetection of microRNAs play a key role in biological research and medical diagnostics, and current detection methods are expensive and require sophisticated processes. We present microRNA activated conditional looping of engineered switches (miRacles), a mix-and-read strategy that is based on conformational changes of DNA nanoswitches upon binding a target microRNA. MiRacles has a sensitivity of [~]4 copies/cell and specificity of a single nucleotide, and can be performed in one hour at a fraction of the cost of traditional microRNA detection techniques. Our method can also be multiplexed to detect multiple microRNAs from one biological sample. The minimalistic miRacles assay has immediate application in biomedical research and longer term potential as a clinical tool.

bioengineering↗