Search bioRxiv⌕ Search
Home/Archive/bioRxiv

bioRxiv · 10.64898/2026.08.07.743401

Knee Joint Biomechanics During Lunges at Different Tibial Angles and External Loads: A Musculoskeletal Analysis with Finite Element Insights

Gao, L.·Gao, S.·Fekete, G.·Lu, Z.·Gao, Z.
View original source ↗Export metadata ↓

Abstract

ObjectiveThis study investigates knee joint biomechanics during lunges under varying tibial angles and external loads using musculoskeletal modeling and finite element analysis. The goal is to provide a biomechanical basis for understanding knee loading patterns and optimizing sports training and rehabilitation. MethodsTwenty-six healthy young men performed lunges under tibial inclination angles relative to the ground (60{degrees} and 90{degrees}) and two external load conditions (bodyweight and an additional 98 N external load). Kinematic and kinetic data were captured using motion capture and force plates. Musculoskeletal models were used to estimate joint moments, range of motion, and stiffness, with data analyzed using two-way repeated-measures ANOVA. Finite element analysis was performed at 90{degrees} tibial angle to evaluate tissue stress and displacement. ResultsThe joint moment at a 60{degrees} tibial angle was much higher than at a 90{degrees}. External load showed significant effects on knee stiffness, with lower rotational stiffness in the horizontal plane (P < 0.001) and lower coronal plane stiffness at 90{degrees} (P = 0.012) under the 98 N external-load condition, indicating reduced resistance to angular displacement in these planes. Under the 90{degrees} tibial-angle condition with external load, peak stress and displacement were concentrated in the posterior horn of the meniscus, with a maximum displacement of 3.12 mm. ConclusionThe anterior tilt of the tibia increased sagittal-plane knee loading, while external load mainly reduced joint stiffness in the coronal and horizontal planes. Under the 90{degrees} loaded condition, the concentration of stress and displacement in the posterior horn of the meniscus suggests a mechanically unfavorable loading pattern rather than direct evidence of injury risk. These findings may provide useful biomechanical information for load management during lunge-based training and rehabilitation.

Explore related subjects

bioengineeringPreprint

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Gao, L., Gao, S., Fekete, G., Lu, Z., Gao, Z.. 2026-08-12. Knee Joint Biomechanics During Lunges at Different Tibial Angles and External Loads: A Musculoskeletal Analysis with Finite Element Insights. https://doi.org/10.64898/2026.08.07.743401

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related preprints

bioRxiv2026

Surfactant-Assisted Colorimetric Signal Enhancement in Paper-Based Glucose Sensing

Paper-based colorimetric sensors offer a low-cost and accessible platform for point-of-care (POC) analysis, but enzyme activity loss during coating and drying can weaken analytical signals and require high enzyme loadings or complex immobilization procedures. Although surfactants are widely used to improve wettability in paper-based assays, their potential contribution to colorimetric performance beyond these effects remains unclear. Here, we investigated surfactant-assisted colorimetric signal enhancement in a glucose assay implemented on a 96-puddle paper plate (96-PPP) and identified Tween 20 as the most effective surfactant. Its effect on detection performance became more pronounced as glucose oxidase (GOx) loading decreased; at 0.1 mg/mL GOx, Tween 20 lowered the limit of detection (LoD) from 0.113 to 0.034 mg/mL (approximately 3.3-fold) over a working range of 0-5 mg/mL, despite no statistically significant change in the measured contact angle at this loading. Tween 20 had no appreciable effect on the reaction in solution but preserved 95% of the apparent reaction rate constant after drying, compared with 11% without it, and atomic force microscopy (AFM) revealed a more dispersed dried enzyme morphology on mica. Tween 20-containing sensors also showed slower signal decay during repeated wetting-drying cycles and thermal stress, retained 77% (vs 26%) of the response at 400 mM NaCl, and exhibited within-PPP and between-batch coefficients of variation (CVs) below 10% (vs 12.3-19.5%), while maintaining glucose selectivity over potentially interfering molecules. These results indicate that Tween 20 enhances paper-based glucose sensing beyond wettability, in part by retaining enzyme cascade activity during drying, although the contributions of the individual enzymes and the underlying mechanism remain to be established.

bioengineering↗
bioRxiv2026

Engineering CAR-T cells to remodel the mucin-rich cancer cell glycocalyx

The dense glycocalyx of cancer cells can restrict immune-cell access to surface antigens and limit CAR-T cell activity. Here, we show that mucin density and epitope position determine how glycocalyx remodeling affects CAR-T cell recognition and killing. We identify KLK5 as a human protease that cleaves tumor-associated mucins, increases access to membrane-proximal antigens, and enhances CAR-T cell function. We then engineer CAR-T cells to display or secrete KLK5, enabling remodeling of the tumor glycocalyx during antigen recognition. KLK5-engineered CAR-T cells improved tumor control across multiple xenograft models, and KLK5-secreting MUC17 CAR-T cells produced the strongest in vivo benefit, prolonging survival compared with conventional MUC17 CAR-T cells. These findings show that CAR-T cells can be engineered to breach the mucin-rich glycocalyx while preserving accessible target epitopes.

bioengineering↗
bioRxiv2026

Wall stiffening is a primary contributor to motility loss in Crohn's disease: an electromechanical modeling study

Fibrotic strictures are among the most disabling complications of Crohn's disease, permanently narrowing the bowel and impairing motility, yet no approved therapy reverses them. Chronic inflammation alters pacemaker-network coupling, smooth-muscle excitability, and calcium-dependent contractility, while fibrosis thickens the bowel wall, narrows the lumen, and changes tissue mechanics. The relative contributions of these coupled electrical, contractile, and structural alterations to motility loss remain unclear. To address this gap, we develop an integrated electromechanical finite-element framework for fibrostenosing Crohn's disease that couples a fibrosis-driven growth model with a FitzHugh-Nagumo electromechanical model. A full-factorial 25 design of experiments is used to quantify the relative effects of electrical diffusivity, excitation threshold, peak active stress, wall stiffness, and hypertrophic remodeling on cyclic lumen-volume deformation. Motility is quantified by the standard deviation of lumen volume over one contraction cycle. Within the parameter ranges examined, increased wall stiffness emerged as the dominant contributor to motility loss, followed by impaired smooth-muscle contractility. Changes in excitation threshold, hypertrophic remodeling, and electrical diffusivity produced substantially smaller effects. Pairwise interactions were small relative to the dominant main effects, indicating that the mechanisms contributed largely through their individual effects. Our findings suggest that limiting wall stiffening while preserving smooth-muscle contractile function may provide a therapeutic strategy for maintaining intestinal motility in fibrostenosing Crohn's disease.

bioengineering↗