Search bioRxiv⌕ Search

bioRxiv · 10.64898/2026.05.21.727023

Machine Learning Assisted Optimization Framework for Designing Transcranial Focused Ultrasound Phased Array Transducer for Deep Brain Neuromodulation in Mice

Abstract

Transcranial focused ultrasound is an emerging noninvasive neuromodulation technique offering high spatial precision and deep penetration. However, in deep brain neuromodulation in mice, the skull base attenuates the signal, distorting the focal region and creating off-target peaks. This study presents a machine-learning-driven simulation framework to optimize a bowl-shaped phased-array transducer design for hypothalamic targeting and compares its performance with that of time-reversal phase conjugation and a single-element baseline. A computed tomography-based mouse head model was used for full-wave acoustic simulations with a fixed bowl geometry (10 mm aperture, 6 mm radius of curvature). Designs were evaluated across various parameters, including operating frequency (0.2-1.5 MHz), active element count (16, 32, 64, 128), and element diameter (300-550 m). The evaluation employed four metrics: the presence of a -3 dB focal region within the hypothalamic area, axial focal length defined by the -3 dB full-width at half maximum, focal fragmentation measured by the -3 dB blob count, and targeting displacement. Random Forest surrogate models were trained in simulation outputs and paired with the Non-dominated Sorting Genetic Algorithm II to reduce computational costs during multi-objective optimization. The forward-excitation-optimized phased-array design (0.73 MHz, 128 elements, 381 m element diameter) achieved a focal region at the hypothalamic target with a full width at half maximum of 0.67 mm, a blob count of 1, and a targeting displacement of 0.38 mm when placed 1 mm below the nominal position. Time-reversal phase conjugation further improved confinement and targeting (full width at half maximum: 0.59 mm; displacement: 0.37 mm). Limitations include reliance on a single mouse anatomy, and incorporating additional CT-derived anatomies should enhance generalizability across strains, ages, and sexes. O_FIG O_LINKSMALLFIG WIDTH=200 HEIGHT=96 SRC="FIGDIR/small/727023v1_ufig1.gif" ALT="Figure 1"> View larger version (28K): org.highwire.dtl.DTLVardef@62de15org.highwire.dtl.DTLVardef@e26e57org.highwire.dtl.DTLVardef@1ba4893org.highwire.dtl.DTLVardef@f2c77a_HPS_FORMAT_FIGEXP M_FIG C_FIG HighlightsO_LIA CT-based acoustic simulation and machine-learning framework was developed to optimize bowl-shaped phased-array transducers for mouse hypothalamic tFUS neuromodulation. C_LIO_LIRandom Forest surrogate models coupled with NSGA-II efficiently identified optimized array designs across frequency, element count, and element diameter. C_LIO_LIThe optimized phased-array design produced a compact hypothalamic focus with submillimeter targeting displacement, with further confinement achieved using time-reversal phase conjugation. C_LI

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Labib, S., Liu, J.. 2026-05-26. Machine Learning Assisted Optimization Framework for Designing Transcranial Focused Ultrasound Phased Array Transducer for Deep Brain Neuromodulation in Mice. https://doi.org/10.64898/2026.05.21.727023

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related preprints

Dynamic Compression Platform for Live Imaging of Scaffold-Transmitted Cellular Mechanoresponses

Mechanical characterization of biomaterial scaffolds is essential to evaluate their capacity to meet the functional demands of target tissues in tissue engineering and regenerative medicine applications. Scaffolds designed to interface with living tissues must support the transmission of mechanical cues to resident cells and stimulate mechanosignaling pathways that are essential to their function. In joints, bone and cartilage cells act as primary mechanosensors, converting mechanical stimuli into biochemical signals that regulate tissue homeostasis and remodelling. Therefore, evaluating cellular mechanoresponses to scaffold-transmitted compression in vitro can inform the development of functional tissue-engineered constructs. For example, poly({epsilon}-caprolactone) (PCL) scaffolds are highly relevant for bone and cartilage tissue engineering due to their biocompatibility, stable mechanical properties and slow degradation. Here, we applied a custom-built device to study compression-induced mechanosignaling in MC3T3-E1 pre-osteoblast cells. The device is composed of a polydimethylsiloxane (PDMS) pillar, a force-sensing load cell, and a piezoelectric linear track. A protocol is described in which MC3T3-E1 cells are repeatedly compressed, while in parallel live tracking of force measurements and live imaging of intracellular calcium dynamics in MC3T3-E1 cells are recorded. PCL scaffolds fabricated by melt electrowriting (MEW) were subsequently integrated into the platform. Scaffold-transmitted compression triggered dynamic increases in cytosolic calcium; in MC3T3-E1 cells located directly under the PCL microfibers, but also in cells located in the interfiber spaces. This device and workflow facilitate in vitro investigations of real-time cellular mechanoresponses to dynamic compression applied with biomaterial scaffolds, and provides a testing platform for evaluating the mechanotransductive properties of scaffolds intended for tissue engineering applications.

bioengineering↗

Ultrasound Tracking Reveals Progressive Regional Strain Differences in Human Achilles Tendons During Fatigue Loading

Ultrasound is commonly used to assess structural changes in symptomatic Achilles tendons, but quantitative biomechanical metrics for progressive tendon deterioration remain limited. The goal of this study was to develop and validate an automated ultrasound tracking algorithm for regional tendon deformation and evaluate strain progression in survived and ruptured tendons during fatigue loading. We hypothesized that maximum strain, average strain, and strain heterogeneity would exhibit different trajectories between groups. Ten cadaveric Achilles tendons underwent cyclic loading with stress tests every 500 cycles until rupture or 150,000 cycles. Ultrasound images acquired during stress tests were analyzed using an automated tracking algorithm to generate spatially resolved regional strain fields. Ultrasound-derived bulk strain was highly correlated with actuator-derived strain in survived (R^2 = 0.968 +/- 0.017) and ruptured tendons (R^2 = 0.972 +/- 0.014). Maximum and average longitudinal strains progressively diverged between groups across fatigue life (Group x FatigueLife: p = 0.003 and p < 0.0001, respectively). During the first 10,000 cycles, average strain decreased in survived tendons ({beta} = -0.0268%, p = 0.0215) but not ruptured tendons ({beta} = 0.0147%, p = 0.1197), with a significant Group x Cycle interaction (p = 0.0061). This study demonstrates that the algorithm quantified Achilles tendon deformation with high fidelity and enabled spatially resolved strain assessment throughout fatigue loading. Maximum and average strain followed different trajectories between groups, whereas strain heterogeneity did not. Early differences in tendon biomechanics suggest that regional strain behavior may change before pronounced differences in absolute magnitude develop.

bioengineering↗

Brain organoid computing for robotic decision-making

Biomimicry has inspired the evolution of robotics toward greater autonomy, adaptability, and symbiosis with humans and dynamic environments. However, current robotic systems still face major challenges in recapitulating the high-efficiency decision-making capabilities of the human brain under complex and dynamic conditions. Here, we present Brainobot, a biohybrid robotic system that establishes a brain organoid controller as a high-level robotic decision-making layer for closed-loop embodiment. By leveraging brain organoid reservoir computing, Brainobot interacts with dynamic environments by receiving and processing sensory inputs and generating motor actions. As a proof-of-concept demonstration, Brainobot is implemented in a humanoid robotic system to perform real-world tasks, including object grasping and laser chasing. Interestingly, Brainobot exhibits unique features, including cross-task adaptivity, high computing efficiency, and low energy consumption. Thus, our approach may provide insights for advancing robotic embodiment and understanding biological decision-making.

bioengineering↗