Search bioRxiv⌕ Search
Home/Archive/bioRxiv

bioRxiv · 10.64898/2026.04.16.718992

Plasma-Enabled Multiscale Coupling of Architecture and Biointerfaces Drives Osteogenesis in 3D-Printed Gyroid Scaffolds

Vijaya Kumari, P. K.·Carpenter, J.·Cleon, B.·Panebianco, C. J.·Boerckel, J. D.·Dean, D.·Vijayan, V. M.
View original source ↗Export metadata ↓

Abstract

Engineering functional bone scaffolds can be enhanced by integrating biologically instructive nanoscale surface features (e.g., nanotopography and nanoroughness), micro-scale geometric cues (e.g., curvature and porosity), and macro-scale mechanical properties (e.g., bulk stiffness); however, these length scales are often optimized independently. Here, we present a multiscale design framework combining additive manufacturing of triply periodic minimal surface (TPMS) gyroid scaffolds with plasma-assisted nanoscale surface engineering to regulate osteogenesis. Controlled variation in strut thickness generates distinct architectural regimes with coupled changes in curvature, porosity, and compressive modulus, recapitulating key aspects of trabecular bone mechanics. Micro-computed tomography confirms trabecular bone-like features, while finite element modeling and compression testing reveal that thinner architectures (0.6 mm) exhibit curvature-preserving geometry and distributed stress profiles favorable for cellular interaction. A low-temperature plasma electroless reduction (PER) strategy enables controlled silver nanoparticle deposition, while polydopamine-mediated adhesion ensures uniform and cytocompatible coatings. Notably, PDA-AgNP-functionalized 0.6 mm scaffolds significantly outperform unmodified and AgNP-only groups, exhibiting enhanced cytoskeletal organization, stress fiber formation, matrix mineralization, and osteogenic gene expression. These findings demonstrate that coupling nanoscale biointerface features with micro- and macro-scale architecture produces a synergistic enhancement in osteogenesis, providing a design framework for functional bone scaffolds. Table of Content GraphicsA plasma-enabled strategy integrates 3D-printed scaffold architecture with nanoscale surface engineering to enhance bone formation. By combining tunable structural design with uniform nanoparticle coating, the study shows that optimal biological responses occur only when mechanical and surface cues act together, highlighting a synergistic multiscale approach for designing advanced biomaterials for bone regeneration. O_FIG O_LINKSMALLFIG WIDTH=200 HEIGHT=138 SRC="FIGDIR/small/718992v1_ufig1.gif" ALT="Figure 1"> View larger version (49K): org.highwire.dtl.DTLVardef@1d29685org.highwire.dtl.DTLVardef@983752org.highwire.dtl.DTLVardef@15816f5org.highwire.dtl.DTLVardef@4b4f50_HPS_FORMAT_FIGEXP M_FIG C_FIG

Explore related subjects

bioengineeringPreprint

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Vijaya Kumari, P. K., Carpenter, J., Cleon, B., Panebianco, C. J., Boerckel, J. D., Dean, D., Vijayan, V. M.. 2026-04-21. Plasma-Enabled Multiscale Coupling of Architecture and Biointerfaces Drives Osteogenesis in 3D-Printed Gyroid Scaffolds. https://doi.org/10.64898/2026.04.16.718992

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related preprints

bioRxiv2026

Synergy-informed bilevel optimization reveals joint-specific benefits for realistic exoskeleton torque prediction

Simulation-driven optimization can guide exoskeleton control design, but its utility is limited by the accuracy with which muscle coordination is predicted. Strict effort-minimization formulations predict non-physiological muscle shutdown under high exoskeleton assistance, leading to peak assistive torques that exceed values reported in human-in-the-loop experiments. We evaluated the accuracy of synergy-informed simulations at predicting assistance across four single-joint exoskeleton configurations: ankle plantarflexion, knee extension, hip flexion, and hip abduction. We implemented a bilevel optimization to predict a parameterized assistive torque that minimizes metabolic cost, with assisted muscle dynamics estimated via either effort-minimization simulations (minimizing muscle effort only) or synergy-informed simulations (minimizing muscle effort constrained to a synergy structure). We used experimental data from five unimpaired adults walking at their preferred speed and compared results descriptively between the two formulations within each subject. Assistance based on effort-minimization simulations shut down agonist muscle activations and overestimated peak assistive torque compared with experimental values. In contrast, constraining muscle controls to a synergy structure prevented non-physiological muscle shutdown and yielded assistive torques closer to those measured in human-in-the-loop experiments. This benefit was not observed equally across all assisted degrees of freedom or subjects, emerging only where no single synergy could be suppressed to unload the assisted muscles. Synergy weights can therefore be interpreted as joint-specific predictors of when simulations can reliably inform wearable robot design.

bioengineering↗
bioRxiv2026

Engineered microvessel networks -- Longitudinal transcriptomic profiling validates chip-grown tissues as a robust model for studying vasculature

Vascularised Organ-on-Chip (OoC) models are promising New Approach Methodologies (NAMs), but their translation requires validation for defined Contexts of Use (CoU). Here, we combine microfluidic microvessel networks (MVNs) with longitudinal bulk and single-cell RNA sequencing to determine how cell provenance influences engineered vascular phenotype. Stromal cell identity produced distinct network architectures and transcriptional trajectories, demonstrating that support cells, commonly treated as interchangeable, represent an important CoU variable. Primary human pancreatic microvascular endothelial cells failed to form stable perfusable networks, but supplementation with 10% Human Umbilical Vein Endothelial Cells (HUVECs) or Blood Outgrowth Endothelial Cells (BOECs) rescued self-assembly. Single-cell transcriptomics identified specialised endothelial populations associated with vascular morphogenesis, including tip, stalk, phalanx, endothelial to mesenchymal transition (EndMT) and pericyte-like endothelial cells. Failed networks lacked coherent endothelial specialisation, whereas rescued networks restored stabilising cell states and revealed FLRT2--UNC5B signalling within pericyte-like HUVECs, recapitulating a pathway implicated in angiogenic development in vivo. These findings establish cell provenance as a critical determinant of microvascular NAM performance and demonstrate how transcriptomic validation can define and strengthen the biological relevance of microvessel-on-chip models for specific CoUs.

bioengineering↗
bioRxiv2026

Benchmarking foundation models for resting-state functional magnetic resonance imaging time series in cognitive aging research

Foundation models trained on large neuroimaging datasets could help smaller studies investigate cognition from brain recordings. However, whether the foundation model-derived representations improve assessment of current cognition, prediction of follow-up cognition, or characterization of cognitive change remains unclear. We evaluated nine configurations from five model families that process regional resting-state functional magnetic resonance imaging time series, using 3,103 scans from 1,653 participants across two observational and five intervention aging cohorts. Primary frozen representations showed no consistent superiority over conventional functional connectivity for concurrent cognitive associations or diagnostic classification. Changing the readout improved selected concurrent cognitive associations without updating model weights, indicating that performance depended partly on how representations were extracted. Additional post-training and embedding alignment yielded gains in selected settings but did not consistently improve performance across outcomes. In the primary longitudinal analyses, imaging representations did not establish added value beyond baseline clinical measures. These findings show that readout choice influences concurrent cognitive associations, while the added value of these representations for longitudinal outcomes remains unestablished.

bioengineering↗