Search bioRxiv⌕ Search
Home/Archive/bioRxiv

bioRxiv · 10.1101/2025.04.25.650568

Bioassembly of region-specific fibrocartilage microtissues to engineer zonally defined meniscal grafts

Kronemberger, G. S.·Chattahy, K.·Spagnuolo, F. D.·Karam, A. S.·Kelly, D. J.
View original source ↗Export metadata ↓

Abstract

Meniscal injuries are common orthopaedic problems which can impair knee function and lead to the development of osteoarthritis. While recent advances in tissue engineering have enabled the fabrication of meniscus-like grafts, these constructs do not fully replicate the zonal structure and composition of the native meniscus. In this study, we used fibrocartilage microtissues generated from meniscus progenitor cells (MPCs) as biological building blocks to biofabricate zonally defined meniscal grafts. MPCs isolated from the inner (iMPC) and outer (oMPC) regions of caprine menisci were used to engineer region-specific meniscal microtissues in a medium-high throughput manner. Both iMPC and oMPC derived microtissues were rich in glycosaminoglycans (GAGs) and collagen, with iMPC microtissues staining more intensely for type II collagen. These microtissues were assembled into two different physically confining moulds (cylindrical and ring-shaped), where they rapidly fused and generated a fibrocartilaginous graft over six weeks of culture. Both iMPC and oMPC assembled microtissues were rich in sGAG and type I collagen, however only the iMPC assembled microtissues stained strongly for type II collagen. We then explored the impact of the catabolic enzyme chondroitinase-ABC (cABC) on the composition and structural organization of the meniscal grafts. This temporal enzymatic treatment increased collagen fiber thickness without altering tissue phenotype. Finally, iMPC and oMPC microtissues were spatially assembled to biofabricate a scaled-up and zonally defined meniscal graft. This graft was phenotypically similar to the native meniscus, with all regions rich in collagen type I and an inner core rich in collagen type II and sGAG. These findings support the use of MPC derived microtissues as biological building blocks for the engineering of zonally defined meniscal grafts. Table of ContentO_LIZonally defined meniscus grafts were biofabricated using inner and outer meniscus progenitor cells microtissues. C_LIO_LIRegion specific microtissues showed phenotypes similar to the native meniscus and successfully fused into cohesive constructs rich in sGAG and collagen. C_LIO_LIcABC treatment modulated collagen fiber formation and organization in assembled grafts. C_LIO_LIThe assembled grafts maintained shape fidelity and may offer a promising strategy for meniscal repair. C_LI O_FIG O_LINKSMALLFIG WIDTH=132 HEIGHT=200 SRC="FIGDIR/small/650568v1_ufig1.gif" ALT="Figure 1"> View larger version (62K): org.highwire.dtl.DTLVardef@1354a5forg.highwire.dtl.DTLVardef@1a5acd3org.highwire.dtl.DTLVardef@1f558aborg.highwire.dtl.DTLVardef@90666e_HPS_FORMAT_FIGEXP M_FIG O_FLOATNOGraphical Abstract:C_FLOATNO Biofabrication of zonally defined meniscal grafts using meniscus progenitor cell (MPC)-derived microtissues. (A) Meniscus progenitor cells (MPCs) derived from the inner (iMPC), and outer (oMPC) regions of the menisci were aggregated into microtissues by cellular self-assembly process using a high-throughput agarose microwell system developed in-house. (B) The iMPC and oMPC microtissues were then separately fused in cylindrical and ring-shaped moulds to form region-specific assembled microtissues. (C) To enhance structural organization, chondroitinase ABC (cABC) enzymatic treatment was applied to the ring-shaped assembled microtissues. (D) Finally, the matured iMPC and oMPC assembled microtissues were assembled to create a scaled-up and zonally defined meniscal graft. C_FIG

Source connections

Explore related subjects

bioengineeringPreprint

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kronemberger, G. S., Chattahy, K., Spagnuolo, F. D., Karam, A. S., Kelly, D. J.. 2025-04-28. Bioassembly of region-specific fibrocartilage microtissues to engineer zonally defined meniscal grafts. https://doi.org/10.1101/2025.04.25.650568

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related preprints

bioRxiv2026

Ferrybots: Programmable Hydrogel Microbots for Rapid Magnetic Navigation and Modular Function

Untethered microrobots could enable localized delivery, sensing, and intervention in confined biological and engineered environments. Magnetic actuation is especially attractive for such systems because it provides remote, fuel-free control, but practical magnetic microrobots remain difficult to manufacture and functionalize. High magnetic loading can interfere with polymerization and structural integrity, while integrating application-specific payloads directly into the robot body often requires the entire material formulation to be redesigned. Here, we introduce Ferrybots, programmable hydrogel microrobots that physically separate magnetic navigation from functional cargo. An automated droplet-on-demand microfluidic flow-lithography process confines high-concentration ferrofluid cores within photopolymerized poly (ethylene glycol) diacrylate (PEGDA) structures, enabling magnetic loading to be programmed through core number and spacing without uniformly dispersing magnetic particles throughout the hydrogel. The process achieved a minimum fabrication cycle time of 15 s. Ferrybots exhibited magnetic-dose-dependent translation and rotation, branched-channel steering, out-of-plane obstacle traversal, and rapid translation, with two-core robots following an external magnet at speeds up to the 9000 mm/min limit of the actuation system. Differences in magnetic loading also enabled sequential selective navigation of distinct Ferrybot populations. Using PEGDA 575 as a common interface material, independently formulated hydrogel cargo modules could subsequently be fused to preformed Ferrybots while preserving navigation. Separately, cargo modules enabled composition-dependent molecular release and oxygen-responsive sensing through 1-mm-thick skin-mimicking optical phantoms representing a broad range of skin types. By decoupling locomotion from function, Ferrybots provide a common magnetic vehicle that can be combined with interchangeable delivery, sensing, or responsive-material modules, offering a general strategy for rapidly adapting microrobots to different applications.

bioengineering↗
bioRxiv2026

Circular-Arc Modal Migration for Ultrasound Imaging--Part I: Finite-Arc Spectral Theory and Stolt-Pullback Factorization

Circular-arc ultrasound imaging requires a spectral construction that accommodates radius-dependent propagation and the spatially varying phase of offset-source transmission. This first of two articles develops Circular-Arc Modal Migration (CAMM), a direct Stolt-type imaging framework in angular modal coordinates. Starting from a first-Born acoustic model, angular decomposition and local radial Stolt mappings convert channel spectra into fields for coherent image synthesis. The offset transmit phase is represented by a phase-screen factorization through reusable spectral factors and spatially weighted fields. A scalar-pullback approximation simplifies this correction to reading one reference image at a geometrically fitted radial coordinate. Both realizations share the same modal construction. Error controls address local radial synthesis, transmit-path expansion, scalar approximation, and phase-screen truncation, with direct integration verifying the separated numerical evaluation. Same-RF point-target comparisons show that scalar pullback closely preserves the principal peak positions and widths of phase-screen imaging in the compact semicircular configuration, while phase screens better control surrounding responses in the shallow convex examples. The retained modal spectrum, frequency band, image radius, and source displacement guide this accuracy--computation choice. CAMM thereby extends direct spectral image formation to circular arcs and supplies the theoretical and numerical basis for the image-quality and performance studies in Part~II.

bioengineering↗
bioRxiv2026

Identification and isolation of migratory subpopulations of cancer cells using microfluidics with fluid walls

Microfluidic assays have great potential for investigating cancer cell migration, a key process underlying metastasis which remains a major clinical challenge. However, adoption by biologists is limited due to complex fabrication and operation methods combined with difficulty in retrieving cells of interest. We jet-print dumbbell-shaped microfluidic environments with fluid walls in standard Petri dishes in seconds using standard growth media and immiscible oil. Prostate cancer cells and chemoattractant (bovine serum) are introduced into each end using local transient differences in Laplace pressure to enable spatial confinement. Automated live-cell imaging monitors chemotaxis towards serum using standard microscopes, as the confining fluid walls are optically transparent. Distinct subpopulations of migratory cells exhibit different morphologies and motilities, assessed using a custom machine-learning segmentation model. Then, we leverage the reconfigurability of fluid walls to isolate and retrieve rapidly-migrating single cells. This demonstrates that fluid-walled microfluidics is a versatile and accessible approach for investigating cancer cell migration at single-cell resolution, offering new opportunities to examine cellular heterogeneity in metastasis.

bioengineering↗