Multifunction Fluorescence Open-Source In Vivo/In Vitro Imaging System (openIVIS)

Branning, J. M.; Faughnan, K. A.; Tomson, A. A.; Bell, G. J.; Isbell, S. M.; DeGroot, A.; Jameson, L.; Kilroy, K.; Smith, M.; Smith, R.; Mottel, L.; Branning, E. G.; Warrall, Z.; Anderson, F.; Panditaradyula, A.; Yang, W.; Abdelmalek, J.; Brake, J.; Cash, K. J.

doi:10.1101/2023.10.06.561111

bioRxiv · 10.1101/2023.10.06.561111

Multifunction Fluorescence Open-Source In Vivo/In Vitro Imaging System (openIVIS)

Branning, J. M.·Faughnan, K. A.·Tomson, A. A.·Bell, G. J.·Isbell, S. M.·DeGroot, A.·Jameson, L.·Kilroy, K.·Smith, M.·Smith, R.·Mottel, L.·Branning, E. G.·Warrall, Z.·Anderson, F.·Panditaradyula, A.·Yang, W.·Abdelmalek, J.·Brake, J.·Cash, K. J.

View original source ↗Export metadata ↓

Abstract

The widespread availability and diversity of open-source microcontrollers paired with off-the-shelf electronics and 3D printed technology has led to the creation of a wide range of low-cost scientific instruments, including microscopes, spectrometers, sensors, data loggers, and other tools that can be used for research, education, and experimentation. These devices can be used to explore a wide range of scientific topics, from biology and chemistry to physics and engineering. In this study we designed and built a multifunction fluorescent open-source in-vivo/in-vitro imaging system (openIVIS) fluorescent imaging system that integrates a Raspberry Pi with commercial cameras and LEDs with 3D printed structures combined with an acrylic housing. Our openIVIS provides three excitation wavelengths of 460 nm, 520 nm, and 630 nm integrated with Python control software to enable fluorescent measurements across the full visible light spectrum. To demonstrate the various potential applications of our system, we tested its performance against a diverse set of experiments including laboratory type assays (measuring fluorescent dyes, using optical nanosensors, and DNA gel electrophoresis) to potentially fieldable applications (plant and mineral imaging). We also tested the potential use for a high school biology environment by imaging small animals and tracking their development over the course of a couple of weeks. Our system demonstrated its ability to measure a wide dynamic range fluorescent response from millimolar to picomolar concentrations in the same sample while measuring responses across visible wavelengths. These results demonstrate the power and flexibility of open-source hardware and software and how it can be integrated with customizable manufacturing to create low-cost scientific instruments with a wide range of applications. Our study provides a promising model for the development of low-cost instruments that can be used in both research and education.

Explore related subjects

bioengineering Preprint

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Branning, J. M., Faughnan, K. A., Tomson, A. A., Bell, G. J., Isbell, S. M., DeGroot, A., Jameson, L., Kilroy, K., Smith, M., Smith, R., Mottel, L., Branning, E. G., Warrall, Z., Anderson, F., Panditaradyula, A., Yang, W., Abdelmalek, J., Brake, J., Cash, K. J.. 2023-10-10. Multifunction Fluorescence Open-Source In Vivo/In Vitro Imaging System (openIVIS). https://doi.org/10.1101/2023.10.06.561111

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related preprints

bioRxiv2026

Single-Component Photo-Crosslinked Lipoic Acid Functionalized Mucin Hydrogels: Dynamic Mucus Mimetics for Antiviral Protection

Native mucus protects epithelial surfaces through viscoelastic networks of disulfide-linked mucins. However, commercially available mucins often fail to reconstitute comparable mechanical and barrier properties, while synthetic and hybrid mucus mimetics require polymeric crosslinkers that may alter mucus-like composition. Inspired by the native architecture, we directly functionalized porcine gastric and bovine submaxillary mucins with -lipoic acid to develop a single-component, photo-crosslinkable hydrogels. Upon UV irradiation (365 nm), the modified mucins rapidly form disulfide-crosslinked networks without added photo-initiator/ polymeric crosslinkers, two orders of magnitude faster as compared with PEG-SH approaches. The resulting mucin-lipoic acid (MUC-LA) hydrogels exhibit mucus-relevant properties, including tunable viscoelasticity, redox responsiveness, self-healing, and size-dependent restrictions on nanoparticle transport. In transwell-based infection models, MUC-LA hydrogels (2-3%) mimicking the healthy airway mucus (G' {approx} 10-20 Pa) suppress epithelial infection by SARS-CoV-2 and influenza A virus. Crosslinked MUC-LA provides greater protection against SARS-CoV-2 than the non-crosslinked, whereas both formulations suppress influenza A infection, suggesting distinct contributions from network formation and mucin-associated interactions. These findings establish a dynamic, mucus-mimetic platform integrating rapid photo-gelation, controllable mechanics, selective transport, and antiviral barrier functionality. MUC-LA hydrogels offer opportunities to investigate mucosal transport and host-pathogen interactions, with potential applications in drug delivery, and as biomaterials.

bioengineering↗

bioRxiv2026

A Fibrous Optofluidic Probe for Endovascular Sensing of Blood Oxygenation and Flow Velocity

Local hemodynamic information including blood oxygenation and flow velocity could guide vascular interventions, yet obtaining these parameters in deep, narrow vessels remains challenging. Here, we report a flexible, submillimeter-scale fibrous optofluidic probe for endovascular sensing of blood oxygenation and flow velocity. The probe integrates a polymer optical fiber for light transmission with a microfluidic tube for dye injection, enabling spectroscopic oximetry and fluorescence dilution-based velocimetry through a single device. Via vascular intervention, we demonstrate local hemodynamic sensing in rabbit arteries and angiography-guided deployment in canine carotid arteries. The probe captures local changes in blood oxygenation and flow velocity during vascular occlusion and reperfusion, revealing hemodynamic disturbances that are not reflected in peripheral monitors. These results illustrate the complementary information provided by local oximetry and velocimetry and establish a compact optofluidic platform for quantitative hemodynamic monitoring during vascular interventions.

bioengineering↗

bioRxiv2026

Broad-spectrum in situ genetic reprogramming of native microbiomes

Complex microbial communities are found throughout terrestrial, aquatic, and animal-associated ecosystems. Genetic modification of discrete microbial taxa within native communities represents a powerful tool to study and augment microbiome functions. Herein, we develop Synthetic Phage Assisted Reprogrammable and Targetable Addition (SPARTA) as a one-step strategy for packaging, delivering, and integrating large synthetic DNA into a broad range of native microbiomes. SPARTA leverages a broad-spectrum synthetic phage particle for in situ genome engineering within complex soil, freshwater, and mammalian fecal microbiomes, reprogramming 59 native species across 16 families. By modulating SPARTA components, we further demonstrated tunability of SPARTA towards targeted microbiome population. Additionally, we built a novel companion tool to quantitatively identify engineered taxa, named 16S crRNA-guided inference of bacterial engineering sequencing or ScRibe-seq. The SPARTA-ScRibe-seq pipeline delivered and validated functional synthetic gene clusters in diverse native microbiomes while preserving the original microbial community structure. Together, this novel genome engineering framework constitutes an end-to-end programmable platform for rational and customizable reprogramming of native microbiomes.

bioengineering↗