Larger and denser: an optimal design for surface grids of EMG electrodes to identify greater and more representative samples of motor units

Abstract

The spinal motor neurons are the only neural cells whose individual activity can be non-invasively identified. This is usually done using grids of surface electromyographic (EMG) electrodes and source separation algorithms; an approach called EMG decomposition. In this study, we combined computational and experimental analyses to assess how the design parameters of grids of electrodes influence the number and the properties of the identified motor units. We first computed the percentage of motor units that could be theoretically discriminated within a pool of 200 simulated motor units when decomposing EMG signals recorded with grids of various sizes and interelectrode distances (IED). Increasing the density, the number of electrodes, and the size of the grids, increased the number of motor units that our decomposition algorithm could theoretically discriminate, i.e., up to 83.5% of the simulated pool (range across conditions: 30.5-83.5%). We then identified motor units from experimental EMG signals recorded in six participants with grids of various sizes (range: 2-36 cm2) and IED (range: 4-16 mm). The configuration with the largest number of electrodes and the shortest IED maximized the number of identified motor units (56{+/-}14; range: 39-79) and the percentage of early recruited motor units within these samples (29{+/-}14%). Finally, the number of identified motor units further increased with a prototyped grid of 256 electrodes and an IED of 2 mm. Taken together, our results showed that larger and denser surface grids of electrodes allow to identify a more representative pool of motor units than currently reported in experimental studies. Significance statementThe application of source separation methods to multi-channel EMG signals recorded with grids of electrodes enables users to accurately identify the activity of individual motor units. However, the design parameters of these grids have never been discussed. They are usually arbitrarily fixed, often based on commercial availability. Here, we showed that using larger and denser grids of electrodes than conventionally proposed drastically increases the number of identified motor units. The samples of identified units are more balanced between early- and late-recruited motor units. Thus, these grids provide a more representative sampling of the active motor unit population. Gathering large datasets of motor units using large and dense grids will impact the study of motor control, neuromuscular modelling, and human-machine interfacing.