Search bioRxiv⌕ Search

bioRxiv · 10.1101/135947

Facilitated Dissociation Of Transcription Factors From Single DNA Binding Sites

Abstract

The binding of transcription factors (TFs) to DNA controls most aspects of cellular function, making the understanding of their binding kinetics imperative. The standard description of bimolecular interactions posits TF off-rates are independent of TF concentration in solution. However, recent observations have revealed that proteins in solution can accelerate the dissociation of DNA-bound proteins. To study the molecular basis of facilitated dissociation (FD), we have used single-molecule imaging to measure dissociation kinetics of Fis, a key E. coli TF and major bacterial nucleoid protein, from single dsDNA binding sites. We observe a strong FD effect characterized by an exchange rate {bsim}1 x 104 M-1s-1, establishing that FD of Fis occurs at the single-binding-site level, and we find that the off-rate saturates at large Fis concentrations in solution. While spontaneous (i.e., competitor-free) dissociation shows a strong salt dependence, we find that facilitated dissociation depends only weakly on salt. These results are quantitatively explained by a model in which partially dissociated bound proteins are susceptible to invasion by competitor proteins in solution. We also report FD of NHP6A, a yeast TF whose structure differs significantly from Fis. We further perform molecular dynamics simulations, which indicate that FD can occur for molecules that interact far more weakly than those we have studied. Taken together, our results indicate that FD is a general mechanism assisting in the local removal of TFs from their binding sites and does not necessarily require cooperativity, clustering, or binding site overlap.\n\nSIGNIFICANCE STATEMENTTranscription factors (TFs) control biological processes by binding and unbinding to DNA. Therefore it is crucial to understand the mechanisms that affect TF binding kinetics. Recent studies challenge the standard picture of TF binding kinetics by demonstrating cases of proteins in solution accelerating TF dissociation rates through a facilitated dissociation (FD) process. Our study shows that FD can occur at the level of single binding sites, without the action of large protein clusters or long DNA segments. Our results quantitatively support a model of FD in which competitor proteins invade partially dissociated states of DNA-bound TFs. FD is expected to be a general mechanism for modulating gene expression by altering the occupancy of TFs on the genome.\n\nAuthor ContributionsRamsey I. Kamar\n\ndesigned research, performed research, contributed new reagents/analytic tools, analyzed data, wrote the paper\n\nEdward J. Banigan\n\ndesigned research, performed research, contributed new reagents/analytic tools, analyzed data, wrote the paper\n\nAykut Erbas\n\ndesigned research, performed research, contributed new reagents/analytic tools, analyzed data, wrote the paper\n\nRebecca D. Giuntoli\n\ndesigned research, performed research, contributed new reagents/analytic tools, analyzed data, wrote the paper\n\nMonica Olvera de la Cruz\n\ndesigned research, performed research, wrote the paper\n\nReid C. Johnson\n\ndesigned research, performed research, contributed new reagents/analytic tools, analyzed data, wrote the paper\n\nJohn F. Marko\n\ndesigned research, performed research, contributed new reagents/analytic tools, analyzed data, wrote the paper

Source connections

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kamar, R. I., Banigan, E. J., Erbas, A., Giuntoli, R. D., Olvera de la Cruz, M., Johnson, R. C., Marko, J. F.. 2017-05-09. Facilitated Dissociation Of Transcription Factors From Single DNA Binding Sites. https://doi.org/10.1101/135947

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related preprints

Single Molecule Diffusion Studies Reveal Rapid Translations Across Target Membrane Surfaces for both p40Phox PX domain and Class III PI3K VPS34 Complex 1, the Autophagy Lipid Kinase

Single molecule analyses are providing new insights into the molecular mechanisms by which peripheral membrane proteins approach and translate across a target bilayer surface before stable docking. Here we compare and contrast the translational movements of four diffusers on a representative supported lipid bilayer: (i) the fluorescent lipid LRB-(DO)PE, (ii) the G-protein Rab1A anchored to (DO)PE; (iii) the PI(3)P sensor p40Phox PX domain, and (iv) the autophagy lipid kinase VPS34 Complex 1. The latter enzyme is a Class III PI-3-Kinase and its unusual architecture exhibits two distinct membrane-docking "feet" unique to Class III PI3Ks. Notably, the membrane contact surfaces of the PX domain and autophagy lipid kinase each possess multiple positive charges suitable for electrostatic interactions with their anionic target membrane. The present single molecule tracking studies reveal that both the fluorescent lipid and the lipid-anchored G protein Rab1A exhibit 2-dimensional translation typical of simple lipid diffusion in the bilayer. Single molecule density measurements indicate both PX domain and autophagy lipid kinase exhibit significantly reduced membrane docking when the bilayer negative charge is decreased, confirming the importance of their protein-bilayer electrostatic interactions. Single molecule tracking studies reveal that both PX domain and autophagy lipid kinase exhibit hopping movements across the bilayer surface during their initial bilayer contacts, yielding a significantly higher frequency of long range displacements than allowed by lipid 2-D diffusion. After transitioning from hopping to a stable bilayer-docked state, both PX domain and autophagy lipid kinase exhibit 2-D diffusion slower than lipid diffusion indicating the appearance of increased frictional drag against the bilayer due to new protein-bilayer contacts. PX domain requires its target lipid for the transition from electrostatic hopping to stable bilayer docking, while autophagy lipid kinase can dock spontaneously to anionic lipid bilayers even in the absence of its substrate lipid. In principle, the slowly diffusing, bilayer-docked states of PX domain and autophagy lipid kinase could be interrupted by unbinding-hopping-rebinding events. However, such events are not detected for PX domain in the presence of target lipid (DO)PI(3)P nor for autophagy lipid kinase in the presence of substrate lipid (DO)PI. Instead, unbinding-hopping-rebinding events are only observed for autophagy lipid kinase in the absence of substrate lipid, indicating that the presence of a specific binding lipid reduces the frequency or spatial amplitude of such events. Overall, the findings provide evidence that p40Phox PX domain possesses a search mechanism involving electrostatic hopping that speeds its acquisition of target lipid, as previously observed for PH domains. The evidence indicates that the autophagy lipid kinase also exhibits electrostatic hopping/skating behavior that is proposed to play a functional role by speeding regulatory encounters with autophagy lipid kinase activators and effectors. Moreover, the ability of the lipid kinase to spontaneously dock to anionic membranes without a target lipid could facilitate its distribution across broad regions of the growing autophagosome. Finally, the autophagy lipid kinase exhibits multiple translational modes that we hypothesize are enabled by its two membrane docking feet.

biophysics↗

Inferring scaling laws of branching networks from their geometry by global optimization

Optimality principles are widely used to understand branching networks, yet they are tested on individual branchings that cannot reliably distinguish competing scaling laws. We formulate the missing link between the laws and measurements by mapping each law to its predicted branch points through global optimization. Vascular branch points closely match weighted-length optima when each vessel is allowed its own fitted weight. Inferred scaling laws reveal type-specific geometric signatures hidden from local analysis. They beat all tested laws, including Murray's law in 1,679 of 1,744 held-out hepatic and pulmonary trees. For coronary arteries on the heart surface, an exact discrete optimization model extends the framework beyond convex geometry and supports area-preserving scaling. The framework also identifies distinct laws for airways and plant shoots while rejecting weighted-length optimality for neuronal axons. Global optimization turns network geometry into a quantitative test of the principles that govern branching networks.

biophysics↗

Ultra-precision 3D Printed Sample Tubes of Complex Cross Section for Enhanced Electron Paramagnetic Resonance Sensitivity of AqueousSamples

This paper discusses the applications of ultra-precision 3D printing in developing EPR sample tubes for X-band measurements of aqueous samples. The seed idea of this work started from the flat cell idea discussed in Mett and Hyde et al.(2003), Sidabras et al. (2005), and Sidabras et al. (2017), where placing multiple aqueous flat cells perpendicular to the electric field in the microwave cavity reduce RF losses and improve EPR signal sensitivity. In this work, we present the 3D printed aquastar sample holders for dielectric resonators and the aquasun sample holders for cavity resonators. Even though the ultra-precision 3D printing enables the fabrication of complex cross-sections at 25um resolution, the photopolymer material has comparatively higher dielectric losses compared to the conventional materials like glass and PTFE. To reduce the RF losses due to the inherent dielectric properties, we introduced the latticing approach in reducing the amount of plastic without compromising the structural stability. In addition to this, we present the slicing and dielectric approximation approach in reducing the computation cost for these complex cross-sections. The novel sample tubes discussed here present signal improvements through both simulation and experiments, which were validated through power saturation experiments. The sample tube development methodology presented here provide a general framework for designing and implementing 3D printed EPR sample holders, based on resonator electromagnetic field distribution and dielectric properties of the photopolymer material.

biophysics↗