Biology subjects

Zhao, E. T.

Publications and source records attributed to Zhao, E. T..

3 recordsLinked to original sources

bioRxiv2023

Spiral NeuroString: High-Density Soft Bioelectronic Fibers for Multimodal Sensing and Stimulation

Bioelectronic fibers hold promise for both research and clinical applications due to their compactness, ease of implantation, and ability to incorporate various functionalities such as sensing and stimulation. However, existing devices suffer from bulkiness, rigidity, limited functionality, and low density of active components. These limitations stem from the difficulty to incorporate many components on one-dimensional (1D) fiber devices due to the incompatibility of conventional microfabrication methods (e.g., photolithography) with curved, thin and long fiber structures. Herein, we introduce a fabrication approach, "spiral transformation'', to convert two-dimensional (2D) films containing microfabricated devices into 1D soft fibers. This approach allows for the creation of high density multimodal soft bioelectronic fibers, termed Spiral NeuroString (S-NeuroString), while enabling precise control over the longitudinal, angular, and radial positioning and distribution of the functional components. We show the utility of S-NeuroString for motility mapping, serotonin sensing, and tissue stimulation within the dynamic and soft gastrointestinal (GI) system, as well as for single-unit recordings in the brain. The described bioelectronic fibers hold great promises for next-generation multifunctional implantable electronics.

bioengineering↗

bioRxiv2023

Direct-print three-dimensional electrodes for large-scale, high-density, and customizable neural interfaces

Silicon-based planar microelectronics is a powerful tool for scalably recording and modulating neural activity at high spatiotemporal resolution, but it remains challenging to target neural structures in three dimensions (3D). We present a method for directly fabricating 3D arrays of tissue-penetrating microelectrodes onto silicon microelectronics. Leveraging a high-resolution 3D printing technology based on 2-photon polymerization and scalable microfabrication processes, we fabricated arrays of 6,600 microelectrodes 10-130 {micro}m tall and at 35-m pitch onto a planar silicon-based microelectrode array. The process enables customizable electrode shape, height and positioning for precise targeting of neuron populations distributed in 3D. As a proof of concept, we addressed the challenge of specifically targeting retinal ganglion cell (RGC) somas when interfacing with the retina. The array was customized for insertion into the retina and recording from somas while avoiding the axon layer. We verified locations of the microelectrodes with confocal microscopy and recorded high-resolution spontaneous RGC activity at cellular resolution. This revealed strong somatic and dendritic components with little axon contribution, unlike recordings with planar microelectrode arrays. The technology could be a versatile solution for interfacing silicon microelectronics with neural structures and modulating neural activity at large scale with single-cell resolution.

neuroscience↗

bioRxiv2022

A CMOS-based highly scalable flexible neural electrode interface

Perception, thoughts, and actions are encoded by the coordinated activity of large neuronal populations spread over large areas. Using thin film electrocorticography (ECoG) arrays, this cortical activity has been used to decode speech and individual finger movements, enabling neuroprosthetics, and to localize epileptic foci. However, the connectorization of these multi-thousand channel thin-film arrays to external circuitry is challenging; current state-of-the-art methods are complex, bulky, and unscalable. We address this shortcoming by developing an electrode connector based on an ultra-conformable thin film electrode array that self-assembles onto hard silicon chip sensors, such as microelectrode arrays (MEAs) or camera sensors enabling large channel counts at high density. The interconnects are formed using microfabricated electrode pads suspended by thin support arms, termed flex2chip. Capillary-assisted assembly drives the pads to deform towards the chip surface, and van der Waals forces maintain this deformation, establishing mechanical and Ohmic contact onto individual pixels. We demonstrate a 2200-channel array with a channel density of 272 channels / mm2 connected to the MEA through the flex2chip interconnection method. Thin film electrode arrays connected through the flex2chip successfully measured extracellular action potentials ex vivo. Furthermore, in a transgenic mouse model for absence epilepsy, Scn8a+/-, we observed highly variable propagation trajectories at micrometer scales, even across the duration of a single spike- and-wave discharge (SWD).

bioengineering↗