Search bioRxiv⌕ Search

Biology subjects

Zelik, K. E.

Publications and source records attributed to Zelik, K. E..

2 recordsLinked to original sources

Biomechanical effects of adding an articulating toe joint to a passive foot prosthesis for incline and decline walking

Walking on sloped surfaces is challenging for many lower limb prosthesis users, in part due to the limited ankle range of motion provided by typical prosthetic ankle-foot devices. Adding a toe joint could potentially benefit users by providing an additional degree of flexibility to adapt to sloped surfaces, but this remains untested. The objective of this study was to characterize the effect of a prosthesis with an articulating toe joint on the preferences and gait biomechanics of individuals with unilateral below-knee limb loss walking on slopes. Nine active prosthesis users walked on an instrumented treadmill at a +5{degrees} incline and -5{degrees} decline while wearing an experimental foot prosthesis with two configurations: a Flexible toe joint and a Locked-out toe joint. Three participants preferred the Flexible toe joint over the Locked-out toe joint for incline and decline walking. Eight of nine participants went on to participate in a biomechanical data collection. The Flexible toe joint decreased prosthesis Push-off work by 2 J during both incline and decline walking (p=0.008). During incline walking, prosthetic limb knee flexion at toe-off was 3{degrees} greater in the Flexible configuration compared to the Locked (p=0.008). Overall, these results indicate that adding a toe joint to a passive foot prosthesis has relatively small effects on joint kinematics and kinetics during sloped walking. This study is part of a larger body of work that also assessed the impact of a prosthetic toe joint for level and uneven terrain walking and stair ascent/descent. Collectively, toe joints do not appear to substantially or consistently alter lower limb mechanics for active unilateral below-knee prosthesis users. Our findings also demonstrate that user preference for passive prosthetic technology may be both subject-specific and task-specific. Future work could investigate the inter-individual preferences and potential benefits of a prosthetic toe joint for lower-mobility individuals.

bioengineering↗

Effect of pressure insole sampling frequency on peak force accuracy during running

Pressure sensing insoles enable us to estimate forces under the feet during activities such as running, which can provide valuable insight into human movement. Pressure insoles also afford the opportunity to collect more data in more representative environments than can be achieved in laboratory studies. One key challenge with real-world use of pressure insoles is limited battery life which restricts the amount of data that can be collected on a single charge. Reducing sampling frequency is one way to prolong battery life, at the cost of decreased measurement accuracy, but this trade-off has not been quantified, which hinders decision-making by researchers and developers. Therefore, we characterized the effect of decreasing sampling frequency on peak force estimates from pressure insoles (Novel Pedar, 100 Hz) across a range of running speeds and slopes. Data were downsampled to 50, 33, 25, 20, 16 and 10 Hz. Force peaks were extracted due to their importance in biomechanical algorithms trained to estimate musculoskeletal forces and were compared with the reference sampling frequency of 100 Hz to compute relative errors. Peak force errors increased exponentially from 0.7% (50 Hz) to 9% (10 Hz). However, peak force errors were <3% for all sampling frequencies down to 20 Hz. For some pressure insoles, sampling rate is inversely proportional to battery life. Therefore, these findings suggest that battery life could be increased up to 5x at the expense of 3% errors. These results are encouraging for researchers aiming to deploy pressure insoles for remote monitoring or in longitudinal studies.

physiology↗