Search bioRxiv⌕ Search

Biology subjects

Sluka, J. P.

Publications and source records attributed to Sluka, J. P..

5 recordsLinked to original sources

A Simulation of Semi-Infectious Particles and Genome Complementation Reproduces Interferon Response by Respiratory Epithelial Cells in vitro during Influenza A Virus Infection

In the respiratory epithelium, interferon (IFN)-induced antiviral resistance acts as a defense against infection. Influenza A viruses (IAVs) have evolved multiple strategies to counteract these defenses, including expression of the viral protein NS1, which inhibits both IFN production and the IFN-mediated transcription of Interferon Stimulated Genes (ISG) in infected cells. However, experiments show that this inhibition is imperfect, especially at a low multiplicity of infection (MOI). One hypothesis to describe this phenomenon relies on the presence of Semi-infectious Particles (SIPs) that fail to express NS1. In this scenario, the IFN response is incompletely suppressed at low MOI, while it is successfully inhibited at high MOI because most cells are infected by multiple virions, allowing complementation to rescue NS1 expression. To test this hypothesis, we developed a computer simulation that models viral gene defects and complementation. We compared the model outputs with in vitro experiments at different MOIs. To assess inter-host reproducibility and calibrate the model parameters, we measured IFN levels and viral load over time in bronchial epithelial cell cultures from five human donors. We observed no statistically significant heterogeneity in IFN response or virus production between donors, and the calibrated simulation fits the experimental time series for IFN and viral load. Consistent with literature (1,2), the model predicted higher IFN levels at low MOI than at high MOI. Finally, simulations of IFN treatment applied before and during infection showed reduced viral load, in agreement with our experiments. Increasing the viral genome defect rate above the experimentally estimated rate increased IFN levels and reduced viral load. High MOI simulations showed lower cumulative IFN levels, while NS1 knockout recovered high IFN levels. These results demonstrate the ability of mechanistic models of viral dynamics to predict the innate immune response of epithelial cells during viral infection. Author SummaryRespiratory viruses such as influenza A are highly infectious and pose significant challenges for the human immune system. Through laboratory experiments and computer simulations, we investigated how cells in the respiratory epithelium defend themselves and their neighbors against infection. Using cells collected from different donors, we generated 3-dimensional cell cultures that mimic human airways and measured how they respond to IAV. When a tissue was initially exposed to a small amount of virus, cells could successfully slow or stop the spread of the infection. This phenomenon is hypothesized to be due in part to the high error rate in IAV replication, resulting in many viral particles that are not fully functional. We recapitulated this experimental result with our computational model, validating the model design and parameter estimates. We then simulated a scenario in which cells were pre-treated with interferon, a protective cytokine important to early immune response, and showed that this pre-treatment could successfully limit infection. Laboratory experiments subsequently confirmed this predicted behavior. The computational model reproduced key observations across infection conditions and identified nonfunctional viral particles as important drivers of the early immune response.

systems biology↗

Enabling Transparent Toxicokinetic Modeling for Public Health Risk Assessment

Toxicokinetics describes the absorption, distribution, metabolism, and elimination of chemicals by the body. Predictions from toxicokinetic models provide key information for chemical risk assessment. Traditionally, these predictions extrapolate from experimental animal species data (for example, in rats) to humans. More recently, toxicokinetics has been used for extrapolation from in vitro "new approach methods (NAMs)" for toxicology to in vivo. Chemical-specific in vivo toxicokinetic data are often unavailable for the thousands of chemicals in commerce. Therefore, large amounts of in vitro data measuring chemical-specific toxicokinetics have been collected. These data enable "high-throughput toxicokinetic" or HTTK modeling. The httk R package provides a library of chemical-specific data from peer-reviewed HTTK studies. httk further provides a suite of tools for parameterizing and evaluating toxicokinetic models. httk uses the open-source language MCSim to describe models for compartmental and physiologically based toxicokinetics (PBTK), MCSim can convert the model descriptions into a high-speed C code script. New models are integrated into httk using the open-source package development functionality in R, a model documentation file (R script), and the HTTK model description code file (C script). In addition to HTTK models, httk provides a series of functionalities such as unit conversion, model parameterization, Monte Carlo simulations for uncertainty propagation and biological variability, in vivo-derived data for evaluating model predictions, and other model utility functions. Here, we describe in detail how to add new HTTK models to httk and take advantage of the pre-existing data and functionality in the package. As a demonstration, we describe the integration of the gas inhalation PBTK model into httk. Modern modeling approaches, as exemplified by httk, allow for clear communication, reproducibility, and public scrutiny. The intention of httk is to provide a transparent, open-source tool for toxicokinetics, bioinformatics, and public health risk assessment. Author SummaryWe describe the integration and evaluation of new physiologically based toxicokinetic (PBTK) models into an open-source R package. Adding a new model to the R package allows a modeler to use the existing tools and data for in vitro to in vivo extrapolation (IVIVE). Integration with the R statistical analysis environment further allows model assessment. This workflow is designed to create a more transparent and reproducible approach to toxicokinetic models developed for various exposure scenarios. Here, we demonstrate the model integration and evaluation workflow with an inhalation model. Additionally, we provide an evaluation of the overall package performance as new models, data, and functionality are added over time. Our results show that transparent development of models, and use of existing data within the open-source R package format, allows for improvement of in vitro to in vivo extrapolation estimations. IVIVE is vital for advancement of 21st century human health risk assessment.

pharmacology and toxicology↗

Modelling the spatiotemporal dynamics of senescent cells in wound healing, chronic wounds, and fibrosis

Cellular senescence is known to drive age-related pathology through the senescence-associated secretory phenotype (SASP). However, it also plays important physiological roles such as cancer suppression, embryogenesis and wound healing. Wound healing is a tightly regulated process which when disrupted results in conditions such as fibrosis and chronic wounds. Senescent cells appear during the proliferation phase of the healing process where the SASP is involved in maintaining tissue homeostasis after damage. Interestingly, SASP composition and functionality was recently found to be temporally regulated, with distinct SASP profiles involved: a fibrogenic, followed by a fibrolytic SASP, which could have important implications for the role of senescent cells in wound healing. Given the number of factors at play a full understanding requires addressing the multiple levels of complexity, pertaining to the various cell behaviours, individually followed by investigating the interactions and influence each of these elements have on each other and the system as a whole. Here, a systems biology approach was adopted whereby a multi-scale model of wound healing that includes the dynamics of senescent cell behaviour and corresponding SASP composition within the wound microenvironment was developed. The model was built using the software CompuCell3D, which is based on a Cellular Potts modelling framework. We used an existing body of data on healthy wound healing to calibrate the model and validation was done on known disease conditions. The model provides understanding of the spatiotemporal dynamics of different senescent cell phenotypes and the roles they play within the wound healing process. The model also shows how an overall disruption of tissue-level coordination due to age-related changes results in different disease states including fibrosis and chronic wounds. Further specific data to increase model confidence could be used to explore senolytic treatments in wound disorders.

systems biology↗

PhenoCellPy: A Python package for biological cell behavior modeling

PhysiCell, a mechanistic center-based agent-based modeling framework, describes sequences of cell behaviors in a very elegant way with its phenotype submodel. However, its phenotypes are not usable in other frameworks, and the creation of a new phenotype is not straight forward. PhenoCellPy is an open-source Python package that implements PhysiCells phenotypes and their methods in a general way, that is easily extended and embedded into other python-based models. PhenoCellPy defines methods for modeling sequences of cell behaviors and states (e.g., the cell cycle, or the Phases of cellular necrosis). PhenoCellPy defines Python classes for the Cell Volume (which it subdivides between the cytoplasm and nucleus) and its evolution, the state of the cell and the behaviors the cell displays in each state (called the Phase), and the sequence of behaviors (called the Phenotype). PhenoCellPys can extend existing modeling frameworks as an embedded model. It integrates with the frameworks by defining the cell states (phases), signaling when a state change occurs, if division occurs, and by receiving information from the framework (e.g., how much interferon the cell is exposed to). PhenoCellPy can function with any python-based modeling framework that supports Python 3, NumPy and SciPy.

bioinformatics↗

Computational Modelling of Cell Movements and Aggregations during Kidney Organogenesis

During early kidney organogenesis, nephron progenitor (NP) cells move from the tip to the corner region of the ureteric bud (UB) branches in order to form the pretubular aggregate, the early structure giving rise to nephron formation. Chemotaxis and cell-cell adhesion differences are believed to drive cell patterning during this critical period of organogenesis, but the spatiotemporal organization of this process is incompletely understood. We applied a Cellular Potts model to explore to how these processes contribute to directed cell movement and aggregation. Model parameters were estimated based on fitting to experimental data obtained in ex vivo kidney explant and dissociation-reaggregation organoid culture studies. Our simulations indicated that optimal enrichment and aggregation of NP cells in the UB corner niche requires chemoattractant secretion from both the UB epithelial cells and the NP cells themselves, as well as differences in cell-cell adhesion energies. Furthermore, NP cells were observed, both experimentally and by modelling, to move at higher speed in the UB corner as compared to the tip region where they originated. The existence of different cell speed domains along the UB was confirmed using self-organizing map analysis. In summary, we demonstrated the suitability of a Cellular Potts Model approach to simulate cell movement and patterning during early nephrogenesis. Further refinement of the model should allow us to recapitulate the effects of developmental changes of cell phenotypes and molecular crosstalk during organ development. Author SummaryThe emergence of tissue patterns during vertebrate development is a major interest of both experimental research and biocomputational modelling. In this study, we established a Cellular Potts Model to explore cellular processes during early kidney development. The goal was to elucidate movements and aggregations of nephron progenitor cells. These precursor cells derive from mesenchymal cells around the ureteric buds and eventually form the epithelial structure of the nephron. Moreover, we wanted to explore computationally the mechanisms how these cells segregate from metanephric mesenchyme and move towards the location where the nephron will be formed. Utilizing the Compucell3D simulation software, we developed a model which assumes that nephron progenitor movement and aggregation is governed by only two mechanisms, i.e. cell-cell adhesion differences between cell types and nephron progenitor cell chemotaxis in response to chemoattractant secretion from two sources. These sources were either the epithelial cells of a static ureteric bud and/or the nephron progenitor cells themselves. The simulations indicated faster average cell speeds near the ureteric bud corner, the target region of cell movement and aggregation, and slower speeds near the place of origin, the tip of ureteric bud. The results were validated by comparison of the model predictions with experimental data from two ex vivo embryonic kidney models and a computational optimization protocol.

systems biology↗