Biology subjects

Shautsova, V.

Publications and source records attributed to Shautsova, V..

3 recordsLinked to original sources

bioRxiv2026

Biomimetic scaffolds mimic human subretinal debris for preclinical testing of prosthetic vision

Photovoltaic subretinal prostheses replace the lost photoreceptors in patients blinded by atrophic age-related macular degeneration (AMD) and provide central vision by electrically stimulating the inner retinal neurons. Subretinal debris in geographic atrophy separate the inner nuclear layer from the implant by tens of micrometers, increasing the stimulation threshold and reducing the pattern contrast. Absence of this separating layer in animal models diminishes the accuracy of preclinical testing of the next-generation implants, especially with smaller pixels. We developed three-dimensional biomimetic scaffolds nanoprinted onto photovoltaic arrays to provide a precisely controlled separation between the implants and target neurons in animal models of retinal degeneration. Gap sizes of the scaffolds were adjusted to meet the following requirements: they should allow light penetration to the implant, provide unobstructed flow of electric current, but preclude migration of cells into their 3-D structure. Gaps of 3 m were found to be optimal as they restricted cellular migration and maintained the inner nuclear layer above both planar and pillar electrode arrays. Scaffolds did not measurably alter the photovoltaic response and accurately reproduced the distance dependence of stimulation threshold. Following implantation, the initially fluid-filled intra-scaffold space was progressively filled by cellular matter matching the density of the subretinal debris. This transition is expected to increase resistivity of the scaffold to that of tissue, which was evidenced by concurrently improved grating acuity. These results establish a model of the controlled separation between the implant and the target neurons reproducing the features of subretinal debris in geographic atrophy of human patients, thereby providing a platform for accurate preclinical evaluation of the subretinal implants.

bioengineering↗

bioRxiv2026

Electrodeposited Biocompatible Coatings for 3D Electrodes on Retinal Prostheses

Photovoltaic subretinal prosthesis, PRIMA, provides central vision to patients blinded by age-related macular degeneration, with acuity matching the 100 m pixel size. Further miniaturization requires pillar electrodes to position the stimulating surfaces closer to the inner retinal neurons. While such structures can be electroplated in gold and coated on their tops with SIROF, the exposed gold sidewalls are not biocompatible. Sputtering or atomic layer deposition of protective coatings are unsuitable for selectively passivating the pillar structures without also coating the photosensitive regions and return electrodes of the implant. Here, we present a strategy for biocompatible coating of pillar sidewalls while preserving surrounding implant functionality. The approach combines non-critical photoresist lithography to protect planar return electrodes with electrodeposition of TiO2; or Pt onto gold pillar sidewalls. In-vivo studies demonstrated that both TiO2 and Pt coatings are biocompatible and prevent adverse reactions of the retinal tissue to gold. Since specific capacitance of electroplated TiO2 (25 F/cm2) is much lower than that of Pt (240 F/cm2), the former better limits the current from the side walls and ensures that charge injection occurs predominantly through the pillar tops coated with SIROF (~6 mF/cm2). Electrodeposition, combined with noncritical photolithography provides a scalable wafer-level solution for fabrication of biocompatible three-dimensional electro-neural interfaces, addressing a critical bottleneck in bioelectronics.

bioengineering↗

bioRxiv2026

Titanium and platinum coatings reduce inflammation induced by gold on subretinal prosthesis

Subretinal photovoltaic implants provide central vision to patients blinded by atrophic age-related macular degeneration, with acuity limited by their 100-{micro}m pixels. Higher resolution requires smaller pixels incorporating three-dimensional electrodes, which can be fabricated by gold electroplating. However, the retinal response to exposed gold remains poorly characterized. Here, we evaluated gold biocompatibility on subretinal implants in Royal College of Surgeons rats and compared it with platinum- and titanium-coated surfaces. Although in-vivo optical coherence tomography revealed no overt structural disruption, gold implants induced cellular-scale anomalies, including abnormal morphology of rod bipolar cells, microglial accumulation near the implant, and increased cell death within days after implantation. These effects occurred across flat, pillar, and honeycomb geometries, indicating a material-rather than geometry-dependent response. By contrast, platinum- and titanium-coated implants showed substantially lower loss and morphological disruption of rod bipolar cells, together with markedly reduced microglial activation. These findings indicate that exposed gold surfaces can induce acute retinal inflammation and neuronal loss, whereas conformal platinum or titanium coatings substantially improve biocompatibility. Such coatings enable the development of three-dimensional subretinal prostheses with smaller pixels for improved visual resolution.

bioengineering↗