Biology subjects

Rizzi, A.

Publications and source records attributed to Rizzi, A..

6 recordsLinked to original sources

bioRxiv2020

Overview of the SAMPL6 pKa Challenge: Evaluating small molecule microscopic and macroscopic pKa predictions

The prediction of acid dissociation constants (pKa) is a prerequisite for predicting many other properties of a small molecule, such as its protein-ligand binding affinity, distribution coefficient (log D), membrane permeability, and solubility. The prediction of each of these properties requires knowledge of the relevant protonation states and solution free energy penalties of each state. The SAMPL6 pKa Challenge was the first time that a separate challenge was conducted for evaluating pKa predictions as part of the Statistical Assessment of Modeling of Proteins and Ligands (SAMPL) exercises. This challenge was motivated by significant inaccuracies observed in prior physical property prediction challenges, such as the SAMPL5 log D Challenge, caused by protonation state and pKa prediction issues. The goal of the pKa challenge was to assess the performance of contemporary pKa prediction methods for drug-like molecules. The challenge set was composed of 24 small molecules that resembled fragments of kinase inhibitors, a number of which were multiprotic. Eleven research groups contributed blind predictions for a total of 37 pKa distinct prediction methods. In addition to blinded submissions, four widely used pKa prediction methods were included in the analysis as reference methods. Collecting both microscopic and macroscopic pKa predictions allowed in-depth evaluation of pKa prediction performance. This article highlights deficiencies of typical pKa prediction evaluation approaches when the distinction between microscopic and macroscopic pKas is ignored; in particular, we suggest more stringent evaluation criteria for microscopic and macroscopic pKa predictions guided by the available experimental data. Top-performing submissions for macroscopic pKa predictions achieved RMSE of 0.7-1.0 pKa units and included both quantum chemical and empirical approaches, where the total number of extra or missing macroscopic pKas predicted by these submissions were fewer than 8 for 24 molecules. A large number of submissions had RMSE spanning 1-3 pKa units. Molecules with sulfur-containing heterocycles or iodo and bromo groups were less accurately predicted on average considering all methods evaluated. For a subset of molecules, we utilized experimentally-determined microstates based on NMR to evaluate the dominant tautomer predictions for each macroscopic state. Prediction of dominant tautomers was a major source of error for microscopic pKa predictions, especially errors in charged tautomers. The degree of inaccuracy in pKa predictions observed in this challenge is detrimental to the protein-ligand binding affinity predictions due to errors in dominant protonation state predictions and the calculation of free energy corrections for multiple protonation states. Underestimation of ligand pKa by 1 unit can lead to errors in binding free energy errors up to 1.2 kcal/mol. The SAMPL6 pKa Challenge demonstrated the need for improving pKa prediction methods for drug-like molecules, especially for challenging moieties and multiprotic molecules.

biophysics↗

bioRxiv2020

Assessing the accuracy of octanol-water partition coefficient predictions in the SAMPL6 Part II log P Challenge

The SAMPL Challenges aim to focus the biomolecular and physical modeling community on issues that limit the accuracy of predictive modeling of protein-ligand binding for rational drug design. In the SAMPL5 log D Challenge, designed to benchmark the accuracy of methods for predicting drug-like small molecule transfer free energies from aqueous to nonpolar phases, participants found it difficult to make accurate predictions due to the complexity of protonation state issues. In the SAMPL6 log P Challenge, we asked participants to make blind predictions of the octanol-water partition coefficients of neutral species of 11 compounds and assessed how well these methods performed absent the complication of protonation state effects. This challenge builds on the SAMPL6 pKa Challenge, which asked participants to predict pKa values of a superset of the compounds considered in this log P challenge. Blind prediction sets of 91 prediction methods were collected from 27 research groups, spanning a variety of quantum mechanics (QM) or molecular mechanics (MM)-based physical methods, knowledge-based empirical methods, and mixed approaches. There was a 50% increase in the number of participating groups and a 20% increase in the number of submissions compared to the SAMPL5 log D Challenge. Overall, the accuracy of octanol-water log P predictions in SAMPL6 Challenge was higher than cyclohexane-water log D predictions in SAMPL5, likely because modeling only the neutral species was necessary for log P and several categories of method benefited from the vast amounts of experimental octanol-water log P data. There were many highly accurate methods: 10 diverse methods achieved RMSE less than 0.5 log P units. These included QM-based methods, empirical methods, and mixed methods with physical modeling supported with empirical corrections. A comparison of physical modeling methods showed that QM-based methods outperformed MM-based methods. The average RMSE of the most accurate five MM-based, QM-based, empirical, and mixed approach methods based on RMSE were 0.92{+/-}0.13, 0.48{+/-}0.06, 0.47{+/-}0.05, and 0.50{+/-}0.06, respectively.

biophysics↗

bioRxiv2019

The SAMPL6 SAMPLing challenge: Assessing the reliability and efficiency of binding free energy calculations

Approaches for computing small molecule binding free energies based on molecular simulations are now regularly being employed by academic and industry practitioners to study receptor-ligand systems and prioritize the synthesis of small molecules for ligand design. Given the variety of methods and implementations available, it is natural to ask how the convergence rates and final predictions of these methods compare. In this study, we describe the concept and results for the SAMPL6 SAMPLing challenge, the first challenge from the SAMPL series focusing on the assessment of convergence properties and reproducibility of binding free energy methodologies. We provided parameter files, partial charges, and multiple initial geometries for two octa-acid (OA) and one cucurbit[8]uril (CB8) host-guest systems. Participants submitted binding free energy predictions as a function of the number of force and energy evaluations for seven different alchemical and physical-pathway (i.e., potential of mean force and weighted ensemble of trajectories) methodologies implemented with the GROMACS, AMBER, NAMD, or OpenMM simulation engines. To rank the methods, we developed an efficiency statistic based on bias and variance of the free energy estimates. For the two small OA binders, the free energy estimates computed with alchemical and potential of mean force approaches show relatively similar variance and bias as a function of the number of energy/force evaluations, with the attach-pull-release (APR), GROMACS expanded ensemble, and NAMD double decoupling submissions obtaining the greatest efficiency. The differences between the methods increase when analyzing the CB8-quinine system, where both the guest size and correlation times for system dynamics are greater. For this system, nonequilibrium switching (GROMACS/NS-DS/SB) obtained the overall highest efficiency. Surprisingly, the results suggest that specifying force field parameters and partial charges is insufficient to generally ensure reproducibility, and we observe differences between seemingly converged predictions ranging approximately from 0.3 to 1.0 kcal/mol, even with almost identical simulations parameters and system setup (e.g., Lennard-Jones cutoff, ionic composition). Further work will be required to completely identify the exact source of these discrepancies. Among the conclusions emerging from the data, we found that Hamiltonian replica exchange--while displaying very small variance--can be affected by a slowly-decaying bias that depends on the initial population of the replicas, that bidirectional estimators are significantly more efficient than unidirectional estimators for nonequilibrium free energy calculations for systems considered, and that the Berendsen barostat introduces non-negligible artifacts in expanded ensemble simulations.

biophysics↗

bioRxiv2018

Overview of the SAMPL6 host-guest binding affinity prediction challenge

Accurately predicting the binding affinities of small organic molecules to biological macro-molecules can greatly accelerate drug discovery by reducing the number of compounds that must be synthesized to realize desired potency and selectivity goals. Unfortunately, the process of assessing the accuracy of current computational approaches to affinity prediction against binding data to biological macro-molecules is frustrated by several challenges, such as slow conformational dynamics, multiple titratable groups, and the lack of high-quality blinded datasets. Over the last several SAMPL blind challenge exercises, host-guest systems have emerged as a practical and effective way to circumvent these challenges in assessing the predictive performance of current-generation quantitative modeling tools, while still providing systems capable of possessing tight binding affinities. Here, we present an overview of the SAMPL6 host-guest binding affinity prediction challenge, which featured three supramolecular hosts: octa-acid (OA), the closely related tetra-endo-methyl-octa-acid (TEMOA), and cucurbit[8]uril (CB8), along with 21 small organic guest molecules. A total of 119 entries were received from 10 participating groups employing a variety of methods that spanned from electronic structure and movable type calculations in implicit solvent to alchemical and potential of mean force strategies using empirical force fields with explicit solvent models. While empirical models tended to obtain better performance than first-principle methods, it was not possible to identify a single approach that consistently provided superior results across all host-guest systems and statistical metrics. Moreover, the accuracy of the methodologies generally displayed a substantial dependence on the system considered, emphasizing the need for host diversity in blind evaluations. Several entries exploited previous experimental measurements of similar host-guest systems in an effort to improve their physical-based predictions via some manner of rudimentary machine learning; while this strategy succeeded in reducing systematic errors, it did not correspond to an improvement in statistical correlation. Comparison to previous rounds of the host-guest binding free energy challenge highlights an overall improvement in the correlation obtained by the affinity predictions for OA and TEMOA systems, but a surprising lack of improvement regarding root mean square error over the past several challenge rounds. The data suggests that further refinement of force field parameters, as well as improved treatment of chemical effects (e.g., buffer salt conditions, protonation states) may be required to further enhance predictive accuracy.

biophysics↗

bioRxiv2018

Small-molecule targeting of MUSASHI RNA-binding activity in acute myeloid leukemia

The MUSASHI family of RNA binding proteins (MSI1 and MSI2) contribute to a wide spectrum of cancers including acute myeloid leukemia. We found that the small molecule Ro 08-2750 (Ro) directly binds to MSI2 and competes for its RNA binding in biochemical assays. Ro treatment in mouse and human myeloid leukemia cells resulted in an increase in differentiation and apoptosis, inhibition of known MSI-targets, and a shared global gene expression signature similar to shRNA depletion of MSI2. Ro demonstrated in vivo inhibition of c-MYC and reduced disease burden in a murine AML leukemia model. Thus, we have identified a small molecule that targets MSIs oncogenic activity. Our study provides a framework for targeting RNA binding proteins in cancer.

cancer biology↗

bioRxiv2018

Open Force Field Consortium: Escaping atom types using direct chemical perception with SMIRNOFF v0.1

Here, we focus on testing and improving force fields for molecular modeling, which see widespread use in diverse areas of computational chemistry and biomolecular simulation. A key issue affecting the accuracy and transferrability of these force fields is the use of atom typing. Traditional approaches to defining molecular mechanics force fields must encode, within a discrete set of atom types, all information which will ever be needed about the chemical environment; parameters are then assigned by looking up combinations of these atom types in tables. This atom typing approach leads to a wide variety of problems such as inextensible atom-typing machinery, enormous difficulty in expanding parameters encoded by atom types, and unnecessarily proliferation of encoded parameters. Here, we describe a new approach to assigning parameters for molecular mechanics force fields based on the industry standard SMARTS chemical perception language (with extensions to identify specific atoms available in SMIRKS). In this approach, each force field term (bonds, angles, and torsions, and nonbonded interactions) features separate definitions assigned in a hierarchical manner without using atom types. We accomplish this using direct chemical perception, where parameters are assigned directly based on substructure queries operating on the molecule(s) being parameterized, thereby avoiding the intermediate step of assigning atom types -- a step which can be considered indirect chemical perception. Direct chemical perception allows for substantial simplification of force fields, as well as additional generality in the substructure queries. This approach is applicable to a wide variety of (bio)molecular systems, and can greatly reduce the number of parameters needed to create a complete force field. Further flexibility can also be gained by allowing force field terms to be interpolated based on the assignment of fractional bond orders via the same procedure used to assign partial charges. As an example of the utility of this approach, we provide a minimalist small molecule force field derived from Mercks parm@Frosst (an Amber parm99 descendant), in which a parameter definition file only {approx} 300 lines long can parameterize a large and diverse spectrum of pharmaceutically relevant small molecule chemical space. We benchmark this minimalist force field on the FreeSolv small molecule hydration free energy set and calculations of densities and dielectric constants from the ThermoML Archive, demonstrating that it achieves comparable accuracy to the Generalized Amber Force Field (GAFF) that consists of many thousands of parameters.

biophysics↗