Biology subjects

Reichel, F.

Publications and source records attributed to Reichel, F..

7 recordsLinked to original sources

bioRxiv2025

Viscoelastic characterization of cells in microfluidic channels with 3D hydrodynamic focusing

The viscoelastic nature of biological cells has emerged as an increasingly important research subject due to its relevance for cellular functions under physiological and pathological conditions. Advancements in microfluidics have made this technology a promising tool to study the viscoelasticity of cells. However, significant challenges remain, including the complex distribution of stresses acting on cells depending on the channel geometry, and the difficulty of keeping cells in the focal plane for imaging. Here, we report a new approach using hyperbolic channels for measuring cell viscoelasticity. A channel height much larger than the typical cell size minimized shear stresses so that normal stresses in the hyperbolic region dominated the stress distribution. Reducing the complexity of the stress-strain relationship allowed us to use polyacrylamide microgel beads to calibrate the stress curve. Additionally, we introduced 3D hydrodynamic focusing which enabled us to focus cells and microgel beads in the center of the channel. Finally, Kelvin-Voigt and power-law rheology models were employed to extract the mechanical properties of microgel beads and human leukemia HL60 cells. The measurement technique described here will help establish the viscoelastic properties of cells as an important readout in biophysical research in health and disease.

biophysics↗

bioRxiv2023

High-throughput viscoelastic characterization of cells in hyperbolic microchannels

Extensive research has demonstrated the potential of cell viscoelastic properties as intrinsic indicators of cell state, functionality, and disease. For this, several microfluidic techniques have been developed to measure cell viscoelasticity with high-throughput. However, current microchannel designs introduce complex stress distributions on cells, leading to inaccuracies in determining the stress-strain relationship and, consequently, the viscoelastic properties. Here, we introduce a novel approach using hyperbolic microchannels that enable precise measurements under a constant extensional stress and offer a straightforward stress-strain relationship, while operating at a measurement rate of up to 100 cells per second. We quantified the stresses acting in the channels using mechanical calibration particles made from polyacrylamide (PAAm) and found that the measurement buffer, a solution of methyl cellulose and phosphate buffered saline, has a constant extensional viscosity of 0.5 Pa s up to 200 s-1. By measuring oil droplets with varying viscosities, we successfully detected changes in the relaxation time of the droplets and our approach could be used to get the interfacial tension and viscosity of liquid-liquid droplet systems from the same measurement. We further applied this methodology to PAAm microgel beads, demonstrating the accurate recovery of Youngs moduli and the near-ideal elastic behavior of the beads. To explore the influence of altered cell viscoelasticity, we treated HL60 human leukemia cells with Latrunculin B and Nocodazole, resulting in clear changes in cell stiffness while relaxation times were only minimally affected. In conclusion, our approach offers a streamlined and time-efficient solution for assessing the viscoelastic properties of large cell populations and other microscale soft particles.

biophysics↗

bioRxiv2022

Shear rheology of methyl cellulose based solutions for cell mechanical measurements at high shear rates

Methyl cellulose (MC) is a widely used material in various microfluidic applications in biology. Due to its biocompatibility, it has become a popular crowding agent for microfluidic cell deformability measurements, which usually operate at high shear rates (> 10,000 s-1). However, a full rheological characterization of methyl cellulose solutions under these conditions has not yet been reported. With this study, we provide a full shear-rheological description for solutions of up to 1% MC dissolved in phosphate-buffered saline (PBS) that are commonly used in real-time deformability cytometry (RT-DC). We characterized three different MC-PBS solutions used for cell mechanical measurements in RT-DC with three different shear rheometer setups to cover a range of shear rates from 0.1 - 150,000 s-1. We report viscosities and normal stress differences in this regime. Viscosity functions can be well described using a Carreau-Yasuda model. Furthermore, we present the temperature dependency of shear viscosity and first normal stress difference of these solutions. Our results show that methyl cellulose solutions behave like power-law liquids in viscosity and first normal stress difference at shear rates between 5,000 - 150,000 s-1. We construct a general viscosity equation for each MC solution at a certain shear rate and temperature. Furthermore, we investigated how MC concentration influences the rheology of the solutions and found the entanglement concentration at around 0.64 w/w%. Our results help to better understand the viscoelastic behavior of MC solutions, which can now be considered when modelling stresses in microfluidic channels.

biophysics↗

bioRxiv2021

Changes in blood cell deformability in Chorea-Acanthocytosis and effects of treatment with dasatinib or lithium

Misshaped red blood cells (RBCs), characterized by thorn-like protrusions known as acanthocytes, are a key diagnostic feature in Chorea-Acanthocytosis (ChAc), a rare neurodegenerative disorder. The altered RBC morphology likely influences their biomechanical properties which are crucial for the cells to pass the microvasculature. Here, we investigated blood cell deformability of 5 ChAc patients compared to healthy controls during up to one-year individual off-label treatment with the tyrosine kinases inhibitor dasatinib or several weeks with lithium. Measurements with two microfluidic techniques allowed us to assess RBC deformability under different shear stresses. Furthermore, we characterized leukocyte stiffness at high shear stresses. The results show that blood cell deformability - including both RBCs and leukocytes - in general is altered in ChAc patients compared to healthy donors. Therefore, this study shows for the first time an impairment of leukocyte properties in ChAc. During treatment with dasatinib or lithium, we observe alterations in RBC deformability and a stiffness increase for leukocytes. The hematological phenotype of ChAc patients hints at a reorganization of the cytoskeleton in blood cells which partly explains the altered mechanical properties observed here. These findings highlight the need for a systematic assessment of the contribution of impaired blood cell mechanics to the clinical manifestation of ChAc.

biophysics↗

bioRxiv2019

Using real-time fluorescence and deformability cytometry and deep learning to transfer molecular specificity to label-free sorting

The identification and separation of specific cells from heterogeneous populations is an essential prerequisite for further analysis or use. Conventional passive and active separation approaches rely on fluorescent or magnetic tags introduced to the cells of interest through molecular markers. Such labeling is time- and cost-intensive, can alter cellular properties, and might be incompatible with subsequent use, for example, in transplantation. Alternative label-free approaches utilizing morphological or mechanical features are attractive, but lack molecular specificity. Here we combine image-based real-time fluorescence and deformability cytometry (RT-FDC) with downstream cell sorting using standing surface acoustic waves (SSAW). We demonstrate basic sorting capabilities of the device by separating cell mimics and blood cell types based on fluorescence as well as deformability and other image parameters. The identification of blood sub-populations is enhanced by flow alignment and deformation of cells in the microfluidic channel constriction. In addition, the classification of blood cells using established fluorescence-based markers provides hundreds of thousands of labeled cell images used to train a deep neural network. The trained algorithm, with latency optimized to below 1 ms, is then used to identify and sort unlabeled blood cells at rates of 100 cells/sec. This approach transfers molecular specificity into label-free sorting and opens up new possibilities for basic biological research and clinical therapeutic applications.

biophysics↗

bioRxiv2018

High-throughput microfluidic characterization of erythrocyte shape and mechanical variability

The motion of red blood cells (RBCs) in microchannels is important for microvascular blood flow and biomedical applications such as blood analysis in microfluidics. The current understanding of the complexity of RBC shapes and dynamics in microchannels is mainly based on several simulation studies, but there are a few systematic experimental investigations. Here, we present a combined study, which systematically characterizes RBC behavior for a wide range of flow rates and channel sizes. Even though simulations and experiments generally show good agreement, experimental observations demonstrate that there is no single well-defined RBC state for fixed flow conditions, but rather a broad distribution of states. This result can be attributed to the inherent variability in RBC mechanical properties, which is confirmed by a model that takes the variation in RBC shear elasticity into account. This represents a significant step toward a quantitative connection between RBC behavior in microfluidic devices and their mechanical properties, which is essential for a high-throughput characterization of diseased cells.\n\nSignificance StatementThe ability to change shape is crucial for the proper functioning of red blood cells under harsh conditions in the microvasculature, since their shapes strongly affect the flow behavior of whole blood. Our results from simulations and systematic experiments reveal the shapes and dynamics of red blood cells for different flow conditions and channel dimensions, generally in good agreement. However, in the experiments, cells do not exhibit a single well-defined shape for fixed flow conditions. We show that this distribution of shapes can be attributed to the variability in mechanical properties of red blood cells.

biophysics↗

bioRxiv2018

Standardized microgel beads as elastic cell mechanical probes

Cell mechanical measurements are gaining increasing interest in biological and biomedical studies. However, there are no standardized calibration particles available that permit the cross-comparison of different measurement techniques operating at different stresses and time-scales. Here we present the rational design, production, and comprehensive characterization of poly-acylamide (PAAm) microgel beads mimicking biological cells. We produced mono-disperse beads at rates of 20 - 60 kHz by means of a microfluidic droplet generator, where the pre-gel composition was adjusted to tune the beads elasticity in the range of cell and tissue relevant mechanical properties. We verified bead homogeneity by optical diffraction tomography and Brillouin microscopy. Consistent elastic behavior of microgel beads at different shear rates was confirmed by AFM-enabled nanoindentation and real-time deformability cytometry (RT-DC). The remaining inherent variability in elastic modulus was rationalized using polymer theory and effectively reduced by sorting based on forward-scattering using conventional flow cytometry. Our results show that PAAm microgel beads can be standardized as mechanical probes, to serve not only for validation and calibration of cell mechanical measurements, but also as cell-scale stress sensors.\n\nSignificance StatementOften vastly different cell mechanical properties are reported even for the same cell type when employing different measurement techniques. This discrepancy shows the urgent need for standardized calibration particles to cross-compare and validate techniques. Microgel beads can serve this purpose, but they have to fulfil specific requirements such as homogeneity, sizes and elasticities in the range of the cells, and they have to provide comparable results independent of the method applied. Here we demonstrate the standardized production of polyacrylamide microgel beads with all the features an elastic cell-mimic should have. These can not only be used as method calibration particles, but can also serve as cell-scale sensors to quantify normal and shear stresses exerted by other cells and inside tissues, enabling many new applications.

biophysics↗