Extending the limits of 3D printed polymers on paper towards bioanalytical sensing
Polymeric 3D printing of microfluidic devices for biosensing is an appealing fabrication alternative for rapid manufacturing of biosensing devices with complex geometry in a streamlined, repeatable and cost-effective manner without the need for expensive instrumentation such as those employed in photochemical etching and soft lithography. Hybrid 3D printed paper-based microfluidics is an emerging area which harnesses the unique properties of both, merging the construction of microfluidic structures and the inherent capillary-driven flow within paper substrates. In this work, we have fabricated hydrophobic barriers by 3D printing a single layer of machinable wax, thermoplastic polyurethane, polylactic acid and polypropylene directly on chromatography paper to create open microchannels and determine the most suitable material. Characterization of each open microchannel using the four materials revealed polypropylene as the most reliable material with high hydrophobic barrier integrity and resolution. Polypropylene achieved functional microchannels with a resolution of 621 {+/-} 33{micro}m, hydrophobic barrier integrity of (93.75 {+/-} 9.16%), wicking speed of 0.38mm/s and optimal hydrophilicity of channels (51.4 {+/-} 8.36 {degrees}) with minimal embedding during thermal curing. To demonstrate proof of principle, a fluorescence assay demonstrating the formation of a dimeric g-quadruplex structure from a g-rich sequence which significantly enhances fluorescence of thioflavin T was implemented.