Biology subjects

Morota, G.

Publications and source records attributed to Morota, G..

At least 19 recordsLinked to original sources

bioRxiv2026

Phenotypic plasticity, stalk geometry, and noncoding variation underpin stalk lodging resistance in maize

Stalk lodging causes severe yield losses in maize (Zea mays L.) worldwide, worsening food and feed security. Stalk lodging resistance is influenced by multiple traits at various levels of biological organization, collectively referred to as intermediate traits, but their identities, genetic bases, and interrelationships remain poorly resolved. Here, evaluation of multiple geometric and structural intermediate traits in a maize diversity panel across four environments showed that macroenvironmental variation is the predominant driver of phenotype plasticity and that plasticity varies with internode position along the stalk, consistent with height-dependent mechanosensing. Major and minor diameters, moment of inertia, and rind penetration resistance, were genetically tractable and showed strong genetic correlations with stalk flexural stiffness. Multivariate analyses revealed two distinct but complementary mechanistic pathways, represented by cross-sectional geometry and rind architecture, that contribute to stalk mechanical performance. Association analyses using whole-genome resequencing data identified 705 SNPs associated with intermediate traits, fewer than 20% of which overlapped genic regions, indicating that most associated variation resides outside annotated genes. Interestingly, about 22% of SNPs were shared between at least two traits, indicating substantial shared genetic control among intermediate traits. Candidate gene analyses highlighted novel promising candidate loci associated with intermediate traits while recovering genes previously implicated in stalk lodging resistance. The predominance of noncoding associations further suggests that regulatory variation may contribute substantially to natural variation in intermediate traits underlying stalk lodging resistance.

genetics↗

bioRxiv2025

Reciprocal BLUP: A Predictability-Guided Multi-Omics Framework for Plant Phenotype Prediction

Sustainable improvement of crop performance requires integrative approaches that link genomic variation to phenotypic expression through intermediate molecular layers. Here, we present Reciprocal Best Linear Unbiased Prediction (Reciprocal BLUP), a predictability-guided multi-omics framework that quantifies cross-layer relationships among the genome, metabolome, and microbiome to enhance phenotype prediction. Using a panel of 198 soybean accessions grown under well-watered and drought conditions, we first evaluated four direction-specific prediction models (genome[->]microbiome, genome[->]metabolome, metabolome[->]microbiome, and microbiome[->]metabolome) to estimate the predictability of individual omics features. Then, we evaluated whether subsets of features with high cross-omics predictability improve phenotype prediction. These cross-layer models identify features that play physiologically meaningful roles within multi-omics systems, enabling us to prioritize variables that capture coherent biological signals enriched for phenotype-relevant information. As a result, metabolome features were highly predictable from microbiome data, whereas microbiome predictability from metabolomic data was weaker and more environment-dependent, revealing an asymmetric relationship between these layers. In the subsequent phenotype prediction analysis, the model incorporating predictability-based feature selection substantially outperformed models using randomly selected features and also achieved prediction accuracies comparable to those of the full-feature model. Under drought, phenotype prediction models based on metabolomic or microbiomic kernels (MetBLUP or MicroBLUP) outperformed the genomic baseline (GBLUP) for several biomass-related traits, indicating that environment-responsive omics layers captured phenotypic variation not explained by additive genetic effects. Our results highlight hierarchical interactions among genomic, metabolic, and microbial systems, with the metabolome functioning as an integrative mediator linking genotype, environment, and microbiome composition. The Reciprocal BLUP framework provides a biologically interpretable and practical approach for integrating multi-omics data, improving phenotype prediction, and guiding omics-based feature selection in plant breeding.

bioinformatics↗

bioRxiv2025

Impact of trait measurement error on quantitative genetic analysis of computer vision derived traits

BackgroundQuantitative genetic analysis of image- or video-derived phenotypes is increasingly being performed for a wide range of traits. Pig body weight values estimated by a conventional approach or a computer vision system can be considered as two different measurements of the same trait, but with different sources of phenotyping error. Previous studies have shown that trait measurement error, defined as the difference between manually collected phenotypes and image-derived phenotypes, can be influenced by genetics, suggesting that the error is systematic rather than random and is more likely to lead to misleading quantitative genetic analysis results. Therefore, we investigated the effect of trait measurement error on genetic analysis of pig body weight (BW). ResultsCalibrated scale-based and image-based BW showed high coefficients of determination and goodness of fit. Genomic heritability estimates for scale-based and image-based BW were mostly identical across growth periods. Genomic heritability estimates for trait measurement error were consistently negligible, regardless of the choice of computer vision algorithm. In addition, genome-wide association analysis revealed no overlap between the top markers identified for scale-based BW and those associated with trait measurement error. Overall, the deep learning-based regressions outperformed the adaptive thresholding segmentation methods. ConclusionsThis study showed that manually measured scale-based and image-based BW phenotypes yielded the same quantitative genetic results. We found no evidence that BW trait measurement error could be influenced, at least in part, by genetic factors. This suggests that trait measurement error in pig BW does not contain systematic errors that could bias downstream genetic analysis.

genetics↗

bioRxiv2025

Genomic prediction of stalk lodging resistance and the associated intermediate phenotypes in maize using whole-genome resequence and multi-environmental data

Breeding for stalk lodging resistance is of paramount importance to maintain and improve maize yield and quality and meet increasing food demand. The integration of environmental, phenotypic, and genotypic information offers the opportunity to develop genomic prediction strategies that can improve the genetic gain for complex traits such as stalk lodging. However, implementation of genomic predictions for stalk lodging resistance has been sparse primarily due to the lack of reliable and reproducible phenotyping strategies. In this study, we measured 10 traits related to stalk lodging resistance obtained from a novel phenotyping platform on approximately 31,000 individual stalks. These traits were combined with environmental information and whole-genome resequence data to investigate the predictive ability of different single and multi-environment genomic prediction models. In total, 555 maize inbred lines from the Wisconsin diversity panel were evaluated in four environments. The multi-environment models more than doubled the prediction accuracy compared to the single-environment model for most traits, particularly when predicting lines in a sparse testing design. Predictive correlations for stalk bending strength and stalk flexural stiffness, a non-destructive method for assessment of stalk lodging resistance, were moderately high and ranged between 0.32 to 0.89 and 0.26 to 0.88, respectively. In contrast, rind thickness was the most difficult trait to predict. Our results show that the use of multi-environmental data could improve genomic prediction accuracy for stalk lodging resistance and its intermediate phenotypes. This study will serve as a first step toward genetic improvement and the development of maize varieties resistant to stalk lodging. Core IdeasO_LIThe DARLING platform was successfully used to collect lodging resistance-related phenotypes C_LIO_LIProportion of variation explained by genotype by environment interaction was not negligible C_LIO_LIGenomic predictions for lodging resistance phenotypes ranged from moderate to high C_LIO_LIAccounting for genotype by environment interaction was found to be important for improved predictive performance C_LI Plain language summaryStalk lodging - when maize stalks break or fall over before harvest - can seriously reduce crop yields. Breeding maize that resists lodging is important to ensure reliable food production. We tested about 31,000 individual stalks for 10 traits related to lodging resistance using a new phenotyping system. These traits were combined with environmental information and whole-genome resequence data to investigate the predictive ability of single and multi-environment genomic prediction models. By analyzing 555 maize lines, we found that using data from multiple environments improved genomic prediction accuracy by more than twice as much as using data from a single environment. Traits such as bending strength and flexural stiffness were easier to predict, while rind thickness was more difficult. These results show that combining genetic, environmental, and phenotypic data can help breeders more accurately select maize plants with stronger stalks, leading to better, more resilient crops.

genetics↗

bioRxiv2024

AnimalMotionViz: an interactive software tool for tracking and visualizing animal motion patterns using computer vision

Monitoring the movement patterns of dairy cattle can provide important insight into space utilization or space occupancy in a barn. Although several precision livestock technologies have been developed to record dairy cattle movements, there is a lack of open source tools to track and visualize cattle movement patterns. Therefore, we developed an open-source computer vision software tool, AnimalMotionViz, that allows users to track and visualize dairy cattle movement patterns using a motion heatmap. The software comes with an easy-to-use web-based graphical user interface built with the Python Dash package. It implements a set of background subtraction algorithms in the OpenCV package to track animal motion patterns in real time. The software processes each frame of the input video and identifies the background and foreground using these algorithms. Foreground objects are then subtracted from the background across all frames and cumulatively overlaid on an empty mask image created with the first frame of the input video to visualize the intensity or frequency of motion across different regions. The user can generate motion heatmaps in an image and video, and also track specific regional motion with a custom mask. The software also returns the top three peak intensity locations, the total percentage of regions used, and the within-quadrant percentage of regions used. In four 5 min sample videos, quadrants with peak intensity of space use, as identified using the software, aligned with quadrants where calves spent the greatest duration of time, according to continuous recording of behavior from video. The motion heatmaps generated by AnimalMotionViz can be used to understand space utilization or space occupation by animals, as well as to assess how space allocation affects dairy cow movement. We conclude that the newly developed AnimalMotionViz is a user-friendly and efficient tool to support research developments in precision livestock farming towards enhancing cattle management practices and improving pen designs.

animal behavior and cognition↗

bioRxiv2024

Genomic prediction of metabolic content in rice grain in response to warmer night conditions

It has been argued that metabolic content can be used as a selection marker to accelerate crop improvement because metabolic profiles in crops are often under genetic control. Evaluating the role of genetics in metabolic variation is a long-standing challenge. Rice, one of the worlds most important staple crops, is known to be sensitive to recent increases in nighttime temperatures. Quantification of metabolic levels can help measure rice responses to high night temperature (HNT) stress. However, the extent of metabolic variation that can be explained by regression on whole-genome molecular markers remains to be evaluated. In the current study, we generated metabolic profiles for mature grains from a subset of rice diversity panel accessions grown under optimal and HNT conditions. Metabolite accumulation was low to moderately heritable, and genomic prediction accuracies of metabolite accumulation were within the expected upper limit set by their genomic heritability estimates. Genomic heritability estimates were slightly higher in the control group than in the HNT group. Genomic correlation estimates for the same metabolite accumulation between the control and HNT conditions indicated the presence of genotype-by-environment interactions. Reproducing kernel Hilbert spaces regression and image-based deep learning improved prediction accuracy, suggesting that some metabolite levels are under non-additive genetic control. Joint analysis of multiple metabolite accumulation simultaneously was effective in improving prediction accuracy by exploiting correlations among metabolites. The current study serves as an important first step in evaluating the cumulative effect of markers in influencing metabolic variation under control and HNT conditions. Core ideasO_LIRice is sensitive to increases in nighttime and daytime temperatures C_LIO_LIMetabolite accumulation from rice grains was low to moderately heritable C_LIO_LINon-additive genomic prediction models improved prediction accuracy for some metabolites C_LIO_LIResults shed new light on the utility of genomic predictions for metabolite accumulation from rice grains C_LI

genetics↗

bioRxiv2024

Leveraging genomics and temporal high-throughput phenotyping to enhance association mapping and yield prediction in sesame

Sesame (Sesamum indicum) is an important oilseed crop with rising demand due to its high oil quality. To meet these future demands, there is an urgent need to develop and integrate new breeding strategies. While genomic resources have advanced genetic research in sesame, implementation of high-throughput phenotyping and genetic analysis of longitudinal traits remains limited. Here, we combined high-throughput phenotyping and random regression models to investigate the dynamics of plant height, leaf area index, and five spectral vegetation indices throughout the sesame growing seasons in a diversity panel. Modeling the temporal phenotypic and additive genetic trajectories revealed distinct patterns corresponding to the sesame growth cycle. We also conducted longitudinal genomic prediction and association mapping of plant height using various models and cross-validation schemes. Moderate prediction accuracy was obtained when predicting new genotypes at each time point, and moderate to high values were obtained when forecasting future phenotypes. Association mapping revealed three genomic regions in linkage groups 6, 8, and 11 conferring trait variation over time and growth rate. Furthermore, we leveraged correlations between the temporal trait and seed-yield and applied multi-trait genomic prediction. We obtained an improvement over single-trait analysis, especially when phenotypes from earlier time points were used, highlighting the potential of using a high-throughput phenotyping platform as a selection tool. Our results shed light on the genetic control of longitudinal traits in sesame and underscore the potential of high-throughput phenotyping to detect a wide range of traits and genotypes that can inform sesame breeding efforts to enhance yield.

plant biology↗

bioRxiv2022

Multi-environment analysis enhances genomic prediction accuracy of agronomic traits in sesame

Sesame is an ancient oilseed crop containing many valuable nutritional components. Recently, the demand for sesame seeds and their products has increased worldwide, making it necessary to enhance the development of high-yielding cultivars. One approach to enhance genetic gain in breeding programs is genomic selection. However, studies on genomic selection and genomic prediction in sesame are limited. In this study, we performed genomic prediction for agronomic traits using the phenotypes and genotypes of a sesame diversity panel grown under Mediterranean climatic conditions over two growing seasons. We aimed to assess the accuracy of prediction for nine important agronomic traits in sesame using single- and multi-environment analyses. In single-environment analysis, genomic best linear unbiased prediction, BayesB, BayesC, and reproducing kernel Hilbert spaces models showed no substantial differences. The average prediction accuracy of the nine traits across these models ranged from 0.39-0.79 for both growing seasons. In the multi-environment analysis, the marker-by-environment interaction model, which decomposed the marker effects into components shared across environments and environment-specific deviations, improved the prediction accuracies for all traits by 15%-58% compared to the single-environment model, particularly when borrowing information from other environments was made possible. Our results showed that single-environment analysis produced moderate-to-high genomic prediction accuracy for agronomic traits in sesame. The multi-environment analysis further enhanced this accuracy by exploiting marker-by-environment interaction. We concluded that genomic prediction using multi-environmental trial data could improve efforts for breeding cultivars adapted to the semi-arid Mediterranean climate.

genetics↗

bioRxiv2022

Evaluating metabolic and genomic data for predicting grain traits under high night temperature stress in rice

The asymmetric increase in average nighttime temperatures relative to increase in average daytime temperatures due to climate change is decreasing grain yield and quality in rice. Therefore, a better understanding of the impact of higher night temperature on single grain at whole genome level is essential for future development of more resilient rice. We investigated the utility of metabolites obtained from grains to classify high night temperature conditions of genotypes, and metabolites and single nucleotide polymorphisms to predict grain length, width, and perimeter phenotypes using a rice diversity panel. We found that the metabolic profiles of rice genotypes alone could be used to classify control and high night temperature conditions with high accuracy using random forest or extreme gradient boosting. The best linear unbiased prediction and BayesC showed greater metabolic prediction performance than machine learning models for grain-size phenotypes. Metabolic prediction was most effective for grain width, resulting in the highest prediction performance. Genomic prediction performed better than metabolic prediction. Integrating metabolites and genomics simultaneously in a prediction model slightly improved prediction performance. We did not observe a difference in prediction between the control and high night temperature conditions. Several metabolites were identified as auxiliary phenotypes that could be used to enhance the multi-trait genomic prediction of grain-size phenotypes. Our results showed that, in addition to single nucleotide polymorphisms, metabolites collected from grains offer rich information to perform predictive analyses, including classification modeling of high night temperature responses and regression modeling of grain size-related phenotypes in rice.

genetics↗

bioRxiv2022

Genome-wide association analysis of hyperspectral reflectance data to dissect growth-related traits genetic architecture in maize under inoculation with plant growth-promoting bacteria

Plant growth-promoting bacteria (PGPB) may be of use for increasing crop yield and plant resilience to biotic and abiotic stressors. Using hyperspectral reflectance data to assess growth-related traits may shed light on the underlying genetics as such data can help assess biochemical and physiological traits. This study aimed to integrate hyperspectral reflectance data with genome-wide association analyses to examine maize growth-related traits under PGPB inoculation. A total of 360 inbred maize lines with 13,826 single nucleotide polymorphisms (SNPs) were evaluated with and without PGPB inoculation; 150 hyperspectral wavelength reflectances at 386-1,021 nm and 131 hyperspectral indices were used in the analysis. Plant height, stalk diameter, and shoot dry mass were measured manually. Overall, hyperspectral signatures produced similar or higher genomic heritability estimates than those of manually measured phenotypes, and they were genetically correlated with manually measured phenotypes. Furthermore, several hyperspectral reflectance values and spectral indices were identified by genome-wide association analysis as potential markers for growthrelated traits under PGPB inoculation. Eight SNPs were detected, which were associated with manually measured and hyperspectral phenotypes. Moreover, the hyperspectral phenotypes were associated with genes previously reported as candidates for nitrogen uptake efficiency, tolerance to abiotic stressors, and kernel size. In addition, a Shiny web application was developed to explore multi-phenotype genome-wide association results interactively. Taken together, our results demonstrate the usefulness of hyperspectral-based phenotyping for studying maize growth-related traits in response to PGPB inoculation.

genetics↗

bioRxiv2022

Classification of plant growth-promoting bacteria inoculation status and prediction of growth-related traits in tropical maize using hyperspectral image and genomic data

Recent technological advances in high-throughput phenotyping have created new opportunities for the prediction of complex traits. In particular, phenomic prediction using hyper-spectral reflectance could capture various signals that affect phenotypes genomic prediction might not explain. A total of 360 inbred maize lines with or without plant growth-promoting bacterial inoculation management under nitrogen stress were evaluated using 150 spectral wavelengths ranging from 386 to 1021 nm and 13,826 single-nucleotide polymorphisms. Six prediction models were explored to assess the predictive ability of hyperspectral and genomic data for inoculation status and plant growth-related traits. The best models for hyperspectral prediction were partial least squares and automated machine learning. The Bayesian ridge regression and BayesB were the best performers for genomic prediction. Overall, hyper-spectral prediction showed greater predictive ability for shoot dry mass and stalk diameter, whereas genomic prediction was better for plant height. The prediction models that simultaneously accommodated both hyperspectral and genomic data resulted in a predictive ability as high as that of phenomics or genomics alone. Our results highlight the usefulness of hyperspectral-based phenotyping for management and phenomic prediction studies. Core ideasO_LIHyperspectral reflectance data can classify plant growth-promoting bacteria inoculation status C_LIO_LIPhenomic prediction performs better than genomic prediction depending on the target phenotype C_LIO_LIAutoML is a promising approach for automating hyperparameter tuning for classification and prediction C_LI

genetics↗

bioRxiv2021

A low-cost greenhouse-based high-throughput phenotyping platform for genetic studies: a case study in maize under inoculation with plant growth-promoting bacteria

Greenhouse-based high-throughput phenotyping (HTP) presents a useful approach for studying novel plant growth-promoting bacteria (PGPB). Despite the potential of this approach to leverage genetic variability for breeding new maize cultivars exhibiting highly stable symbiosis with PGPB, greenhouse-based HTP platforms are not yet widely used because they are highly expensive; hence, it is challenging to perform HTP studies under a limited budget. In this study, we built a low-cost greenhouse-based HTP platform to collect growth-related image-derived phenotypes. We assessed 360 inbred maize lines with or without PGPB inoculation under nitrogen-limited conditions. Plant height, canopy coverage, and canopy volume obtained from photogrammetry were evaluated five times during early maize development. A plant biomass index was constructed as a function of plant height and canopy coverage. Inoculation with PGPB promoted plant growth. Phenotypic correlations between the image-derived phenotypes and manual measurements were at least 0.6. The genomic heritability estimates of the image-derived phenotypes ranged from 0.23 to 0.54. Moderate-to-strong genomic correlations between the plant biomass index and shoot dry mass (0.24-0.47) and between HTP-based plant height and manually measured plant height (0.55-0.68) across the developmental stages showed the utility of our HTP platform. Collectively, our results demonstrate the usefulness of the low-cost HTP platform for large-scale genetic and management studies to capture plant growth. Core ideasO_LIA low-cost greenhouse-based HTP platform was developed. C_LIO_LIImage-derived phenotypes presented moderate to high genomic heritabilities and correlations. C_LIO_LIPlant growth-promoting bacteria can improve plant resilience under nitrogen-limited conditions. C_LI

genetics↗

bioRxiv2021

Simulation study evaluating the ability of two statistical approaches to identify variance quantitative trait loci Arabidopsis and maize

Genomic loci that control the variance of agronomically important traits are increasingly important due to the profusion of unpredictable environments arising from climate change. The ability to identify such variance quantitative trait loci (vQTL) in association studies will be critical for future breeding efforts. Two statistical approaches that have already been used to detect vQTL are the Brown-Forsythe test (BFT) and the double generalized linear model (DGLM). To ensure that they are deployed to variance genome-wide association studies as effectively as possible, it is critical to study the factors that influence their ability to identify vQTL. We used genome-wide marker data in maize (Zea mays L.) and Arabidopsis thaliana to simulate traits controlled by variance quantitative trait nucleotides (vQTNs) and then quantified true and false positive detection rates of the BFT and DGLM. We observed that the DGLM yielded similar or higher true positive vQTN detection rates than the BFT, regardless of the effect size or minor allele frequency (MAF) of the vQTNs. Low true positive detection rates were noted for QTNs with low MAFs (~0.10), especially when tested on subsets of n = 500 individuals. We recommend that larger data sets than those used in our study (i.e., n > 2,532) be considered to overcome these low observed true positive detection rates. Such an undertaking should maximize the potential of the BFT and DGLM to highlight which vQTLs should be considered for further study.

genetics↗

bioRxiv2021

Genome-wide association uncovers the genetic architecture of tradeoff between flowering date and yield components in sesame

Unrevealing the genetic makeup of crop morpho-agronomic traits is essential for improving yield quality and sustainability. Sesame (Sesamum indicum L.), one of the oldest oil-crops in the world, which despite its economical and agricultural importance, is an orphan crop-plant that undergone limited modern selection, thus, preserving wide genetic diversity. Here we harnessed this natural variation in a newly developed sesame panel (SCHUJI) to perform genome-wide association studies for morpho-agronomic traits under the Mediterranean climate conditions. Field-based phenotyping of the SCHUJI panel across two seasons exposed wide phenotypic variation for all traits. Using 20,294 single-nucleotide polymorphism markers, we detected 50 genomic signals associated with these traits. Major genomic region on LG2 was associated with flowering date and yield-related traits, exemplified the key role of the flowering date on productivity. Our results shed light on the genetic architecture of flowering date and its interaction with yield components in sesame and may serve as a basis for future sesame breeding programs in the Mediterranean basin.

plant biology↗

bioRxiv2020

Modeling multiple phenotypes in wheat using data-driven genomic explanatory factor analysis and Bayesian network learning

Inferring trait networks from a large volume of genetically correlated diverse phenotypes such as yield, architecture, and disease resistance can provide information on the manner in which complex phenotypes are interrelated. However, studies on statistical methods tailored to multi-dimensional phenotypes are limited, whereas numerous methods are available for evaluating the massive number of genetic markers. Factor analysis operates at the level of latent variables predicted to generate observed responses. The objectives of this study were to illustrate the manner in which data-driven exploratory factor analysis can map observed phenotypes into a smaller number of latent variables and infer a genomic latent factor network using 45 agro-morphological, disease, and grain mineral phenotypes measured in synthetic hexaploid wheat lines (Triticum Aestivum L.). In total, eight latent factors including grain yield, architecture, flag leaf-related traits, grain minerals, yellow rust, two types of stem rust, and leaf rust were identified as common sources of the observed phenotypes. The genetic component of the factor scores for each latent variable was fed into a Bayesian network to obtain a trait structure reflecting the genetic interdependency among traits. Three directed paths were consistently identified by two Bayesian network algorithms. Flag leaf-related traits influenced leaf rust, and yellow rust and stem rust influenced grain yield. Additional paths that were identified included flag leaf-related traits to minerals and minerals to architecture. This study shows that data-driven exploratory factor analysis can reveal smaller dimensional common latent phenotypes that are likely to give rise to numerous observed field phenotypes without relying on prior biological knowledge. The inferred genomic latent factor structure from the Bayesian network provides insights for plant breeding to simultaneously improve multiple traits, as an intervention on one trait will affect the values of focal phenotypes in an interrelated complex trait system.

genetics↗

bioRxiv2020

Near-infrared spectroscopy outperforms genomic selection for predicting sugarcane feedstock quality traits

The main objectives of this study were to evaluate the prediction performance of genomic and near-infrared spectroscopy (NIR) data and whether the integration of genomic and NIR predictor variables can increase the prediction accuracy of two feedstock quality traits (fiber and sucrose content) in a sugarcane population (Saccharum spp.). The following three modeling strategies were compared: M1 (genome-based prediction), M2 (NIR-based prediction), and M3 (integration of genomics s and NIR wavenumbers). Data were collected from a commercial population comprised of three hundred and eighty-five individuals, genotyped for single nucleotide polymorphisms (SNPs) and screened using NIR spectroscopy. We compared partial least squares (PLS) and BayesB regression methods to estimate marker and wavenumber effects. In order to assess model performance, we employed random sub-sampling cross-validation to calculate the mean Pearson correlation coefficient between observed and predicted genotypic values. Our results showed that models fitted using BayesB were most predictive than PLS models. We found that NIR (M2) provided the highest prediction accuracy, whereas genomics (M1) presented the lowest predictive ability, regardless of the measured traits and regression methods used. The integration of predictors derived from NIR spectroscopy and genomics into a single model (M3) did not significantly improve the prediction accuracy for the two traits evaluated. These findings suggest that NIR-based prediction can be an effective strategy for predicting the genotypic value of sugarcane clones.

genomics↗

bioRxiv2020

SeedExtractor: an open-source GUI for seed image analysis

ABSTRACTAccurate measurement of seed size parameters is essential for both: breeding efforts□aimed at□enhancing yields and basic research□focused on discovering genetic components that regulate seed size. To address this need, we have developed an open-source graphical user interface (GUI) software, SeedExtractor that□determines seed size and shape (including area, perimeter, length, width, circularity, and centroid), and seed color with capability to process a large number of images in a time-efficient manner. In this context, our application takes ∼2 seconds for analyzing an image, i.e. significantly less compared to the other tools. As this software is open-source, it can be modified by users□to serve more specific needs. The adaptability of SeedExtractor was demonstrated by analyzing scanned seeds from multiple crops. We further validated the utility of this application by analyzing mature-rice seeds from 231 accessions in Rice Diversity Panel 1. The derived seed-size traits, such as seed length, width, were subjected to genome-wide association analysis. We identified well-known loci for regulating seed length (GS3) and width (qSW5/GW5) in rice, which demonstrated the accuracy of this application to extract seed phenotypes and accelerate trait discovery. In summary, we present a publicly available application that can be used to determine key yield-related traits in crops.HIGHLIGHT SeedExtractor is an open-source application designed to accurately measure seed size and seed color in a time-efficient manner for a wide variety of plant species.Competing Interest StatementThe authors have declared no competing interest.View Full Text

plant biology↗

bioRxiv2020

Regional genomic heritability mapping for agronomic traits in sugarcane

BackgroundThe identification of genomic regions involved in agronomic traits is the primary concern for sugarcane breeders. Genome-wide association studies (GWAS) leverage the sequence variations to bridge phenotypes and genotypes. However, their effectiveness is limited in species with high ploidy and large genomes, such as sugarcane. As an alternative, a regional heritability mapping (RHM) method can be used to capture genetic signals that may be missed by GWAS by combining genetic variance from neighboring regions. We used RHM to screen the sugarcane genome aiming to identify regions with higher heritability associated with agronomic traits. We considered percentage of fiber in sugarcane bagasse (FB), apparent percentage of sugarcane sucrose (PC), tonnes of pol per hectare (TPH), and tonnes of stalks per hectare (TSH). MethodsSequence-capture data of 508 sugarcane (Saccharum spp.) clones from a breeding population under selection were processed for variant calling analysis using the sugarcane genome cultivar R570 as a reference. A set of 375,195 single nucleotide polymorphisms were selected after quality control. RHM was conducted by splitting the sugarcane genome into windows of 2 Mb length. ResultsWe selected the windows explaining > 20% of the total genomic heritability for TPH (64 windows - 5,654 genes) and TSH (72 windows - 6,050 genes), and > 15% for PC (16 windows - 1,517 genes) and FB (17 windows - 1,615 genes). The top five windows that explained the highest genomic heritability ranged from 20.8 to 24.6% for FB (629 genes), 18.0 to 22.0% for PC (452 genes), 53.8 to 66.0% for TPH (705 genes), and 59.5 to 67.4% for TSH (413 genes). The functional annotation of genes included in those top five windows revealed a set of genes that encode enzymes that integrate carbon metabolism, starch and sucrose metabolism, and phenylpropanoid biosynthesis pathways. ConclusionsThe selection of windows that explained the large proportions of genomic heritability allowed us to identify genomic regions containing a set of genes that are related to the agronomic traits in sugarcane. These windows spanned a region of 58.38Mb, which corresponds to 14.28% of the reference assembly in the sugarcane genome. We contend that RHM can be used as an alternative method for sugarcane breeders to reduce the complexity of the sugarcane genome.

genomics↗