Biology subjects

Maziz, A.

Publications and source records attributed to Maziz, A..

5 recordsLinked to original sources

bioRxiv2026

Impact of Ethylene Oxide Sterilization on PEDOT:PSS Electrophysiology Electrodes

Poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is widely used to fabricate conductive organic coatings for electrodes in electrophysiology. As these devices move toward clinical translation, establishing sterilization methods that preserve their functional properties is essential. Ethylene oxide (EtO) is routinely used for sterilizing heat- and moisture-sensitive medical devices due to its high penetration efficiency and low thermal load. However, the absence of systematic studies evaluating its impact on PEDOT:PSS raises concerns about the compatibility of EtO sterilization with organic electrophysiology interfaces. Here, we report the first comprehensive evaluation of EtO sterilization on PEDOT:PSS electrodes electrochemically deposited onto cortical interfaces designed for intraoperative monitoring and stimulation. EtO exposure induced only minimal changes in surface topography, with no detectable alteration of the electrical or electrochemical performance of the electrodes. Impedance spectroscopy, cyclic voltammetry, and charge-injection capacity measurements all revealed that EtO-treated electrodes retained properties comparable to untreated controls. Moreover, EtO-sterilized PEDOT:PSS coatings demonstrated robust long-term stability under accelerated lifetime testing, exhibiting negligible degradation over extended operation. These findings demonstrate that EtO sterilization is fully compatible with PEDOT:PSS-based bioelectronic interfaces and constitutes a viable pathway toward their safe and effective integration into clinical electrophysiology. This work represents an important step toward translating organic conducting polymer technologies into real-world biomedical applications.

bioengineering↗

bioRxiv2025

Soft, Transparent and Bioresorbable Microelectrode Array for Transient Electrophysiological Recordings

Transparent microelectrode arrays that enable multimodal investigation of spatiotemporal electrophysiological activity are critical tools for advancing the understanding of excitable tissues such as the brain, heart, and peripheral nerves. Traditional implantable devices are engineered for chronic use but require surgical removal when they fail or are no longer needed. In contrast, bioresorbable systems that naturally dissolve after serving temporary functions offer a compelling alternative, eliminating the risks and costs of extraction procedures. Here, we present the design, fabrication, and validation of a soft, fully bioresorbable, and optically transparent MEA platform for transient, bidirectional interfacing with living tissues. The device provides high-resolution electrical mapping of dynamic activity. We report precise characterization of electrochemical performance, mechanical properties, bioresorption kinetics, and biocompatibility. While validated in models of cardiac function, this platform establishes a versatile foundation for bioresorbable electrophysiological technologies with applications ranging from postsurgical monitoring of transient conditions to the study and treatment of neurological and neurodegenerative disorders.

bioengineering↗

bioRxiv2022

Hollow ring-like flexible electrode architecture enabling subcellular multi-directional neural interfacing

Implantable neural microelectrodes for recording and stimulating neural activity are critical for research in neuroscience and clinical neuroprosthetic applications. A current need exists for developing new technological solutions for obtaining highly selective and stealthy electrodes that provide reliable neural integration and maintain neuronal viability. This paper reports a novel Hollow Ring-like type electrode to sense and/or stimulate neural activity from three-dimensional neural networks. Due to its unique design, the ring electrode architecture enables easy and reliable access of the electrode to three-dimensional neural networks with reduced pressure on the biological tissue, while providing improved electrical interface with cells. The Hollow ring electrodes, particularly when coated with the conducting polymer PEDOT:PSS, show improved electrical properties with extremely low impedance and high charge injection capabilities, when compared to traditional planar disk-type electrodes. The ring design also serves as an optimal architecture for cell gowth to create an optimal subcellular electrical- neural interface. In addition, we demonstrated that the quality of recorded neural signals by the ring electrode was higher than recordings from a traditional disk-type electrode in terms of signal-to-noise ratio (SNR) and burst detection from 3D neuronal networks in vitro. Overall, our results suggest the great potential of the hollow ring design for developing next-generation microelectrodes for applications in neural interfaces used in physiological studies and neuromodulation applications.

bioengineering↗

bioRxiv2021

Nanofibrous PEDOT-Carbon Composite on Flexible Probes for Soft Neural Interfacing

In this study, we report a flexible implantable 4-channel microelectrode probe coated with highly porous and robust nanocomposite of poly(3,4-ethylenedioxythiophene) (PEDOT) and carbon nanofiber (CNF) as a solid doping template for high-performance in vivo neuronal recording and stimulation. A simple yet well-controlled deposition strategy was developed via in situ electrochemical polymerization technique to create a porous network of PEDOT and CNFs on a flexible 4-channel gold microelectrode probe. Different morphological and electrochemical characterizations showed that they exhibit remarkable and superior electrochemical properties, yielding microelectrodes combining high surface area, low impedance (16.8 {+/-} 2 M{Omega}.m2 at 1 kHz) and elevated charge injection capabilities (7.6 {+/-} 1.3 mC/cm2) that exceed those of pure and composite PEDOT layers. In addition, the PEDOT-CNF composite electrode exhibited extended biphasic charge cycle endurance, resulting in a negligible physical delamination or degradation for long periods of electrical stimulation. In vitro testing on mouse brain slices showed that they can record spontaneous oscillatory field potentials as well as single-unit action potentials and allow to safely deliver electrical stimulation for evoking field potentials. The combined superior electrical properties, durability and 3D microstructure topology of the PEDOT-CNF composite electrodes demonstrate outstanding potential for developing future neural surface interfacing applications.

bioengineering↗

bioRxiv2021

Scalable Batch Fabrication of Ultrathin Flexible Neural Probes using Bioresorbable Silk Layer

Flexible deep brain probes have been the focus of many research works and aims at achieving better compliance with the surrounding brain tissue while maintaining minimal rejection. Strategies have been explored to find the best way to implant a flexible probe in the brain, while maintaining its flexibility once positioned in the cortex. Here, we present a novel and versatile scalable batch fabrication approach to deliver ultra-thin and flexible penetrating neural probe consisting of a silk-parylene bilayer. The biodegradable silk layer provides a temporary and programmable stiffener to ensure ease of insertion of the ultrathin parylene-based flexible devices. The innovative and yet robust batch fabrication technology allows complete design freedom of the neural probe in terms of materials, size, shape and thickness. These results provide a novel technological solution for implanting ultra-flexible and ultrathin devices, which possesses great potential for brain research.

bioengineering↗