Biology subjects

Leach, K.

Publications and source records attributed to Leach, K..

10 recordsLinked to original sources

bioRxiv2026

Bioorthogonal Tethering of FGF18 to Annealed Microgel Scaffolds Enhances Cartilage Repair

Articular cartilage damage often progresses to osteoarthritis (OA), a degenerative joint disease characterized by chronic pain, limited mobility, and reduced quality of life. Tissue engineering approaches using poly (ethylene glycol) (PEG)-based hydrogels offer tunable mechanical properties and bioactive functionalization, yet the influence of surface charge on cartilage regeneration remains underexplored. Moreover, recombinant fibroblast growth factor 18 (FGF18) has successfully improved cartilage tissue thickness in clinical trials, but required high dosages and recurring injections may limit compliance. Here, we developed a granular microgel-based platform with bioorthogonally tethered FGF18 to evaluate the interplay of microgel surface charge and growth factor presentation on chondrogenesis. Azide groups were incorporated onto the microgel surfaces to enable site specific FGF18 conjugation across microgel scaffolds with distinct surface charges. When seeded with mesenchymal stromal cells, microgel scaffolds functionalized with FGF18 outperformed their unmodified counterparts, evidenced by higher GAG content, collagen content, and compressive modulus. In a murine microfracture model, anionic and zwitterionic microgel scaffolds tethered with FGF18 increased cartilage regeneration compared to nonionic microgels. We detected increased collagen II content within defects treated with tethered FGF18 microgel scaffolds. This work demonstrates the role of surface charge and growth factor presentation in directing cell behavior and tissue repair, advancing the design of biomaterials for cartilage regeneration. HIGHLIGHTSO_LICovalent tethering of FGF18 to microgel surface enables localized bioactivity C_LIO_LIFGF18 tethered microgel scaffolds enhance extracellular matrix deposition and chondrogenic differentiation of murine mesenchymal stromal cells in vitro C_LIO_LILocalized FGF18 presentation improves cartilage tissue formation and mechanical properties in vivo, with anionic and zwitterionic microgel scaffolds outperforming nonionic scaffolds C_LIO_LIFGF18 presentation is a more potent stimulus than microgel surface charge for cartilage regeneration C_LI

bioengineering↗

bioRxiv2026

Dynamic Compression of Spheroid-Laden Alginate Granular Composites Induces Hypertrophic Chondrocyte Phenotype

Hypertrophic cartilage is a promising bone repair strategy by producing a mineralizable matrix that transitions to bone through endochondral ossification. Current approaches require large cell numbers and costly recombinant factors to induce chondrogenesis. Here, we developed a composite granular scaffold using photocrosslinkable alginate microgels, cell-secreted decellularized extracellular matrix (dECM), and mesenchymal stromal cell (MSC) spheroids under dynamic compressive loading for hypertrophic cartilage formation. Incorporation of dECM into MSC spheroids enhanced expression of chondrogenic markers and supported the hypertrophic phenotype, evidenced by increased VEGFA and SPP1 expression and ALP activity. Dynamic loading further increased spheroid sprouting and scaffold mineralization. Histology confirmed mature hypertrophic cartilage conducive to bone formation. Upregulation of hypertrophic and osteogenic markers was associated with YAP1 activation, linking compressive loading to mechanotransduction to drive hypertrophic cartilage formation. These results demonstrate that dynamic compressive loading, cell aggregates, and scaffold granular macroporosity synergistically yield hypertrophic cartilage.

bioengineering↗

bioRxiv2025

Controlled delivery of immunomodulatory factors for mineralized tissue formation in an inflammatory microenvironment

Mesenchymal stromal cells (MSCs) are a promising cell-based therapy for bone healing, contributing to tissue regeneration through direct differentiation or immunomodulatory factor secretion. However, diseases that feature chronic or dysregulated inflammation, such as non-union fractures and osteonecrosis of the jaw (ONJ), have proven difficult to treat with current MSC-based approaches. Here, we investigated whether controlled delivery of immunomodulatory factors would allow MSCs to simultaneously undergo osteogenic differentiation and modulate inflammation. We first used a Design of Experiments approach to identify the type and concentrations of immunomodulatory factors (IMFs) that most effectively induce concurrent pro-regenerative macrophages and MSC osteogenic differentiation, then loaded these IMFs into polymeric microparticles for controlled release. Through our in vitro models, we demonstrated that microparticles releasing IL-10 and IL-4 promote naive MSC osteogenesis and modulate immune response, even in chronic, physiologically relevant, inflammatory conditions. We then applied this approach to an in vivo rat model of ONJ as a clinically relevant example of such conditions. We observed clinically relevant sex-based differences in inflammation and bone formation that have not yet been reported. These data represent key findings that will facilitate the reversal of diseases that are linked to chronic bone loss and inflammation, such as ONJ.

bioengineering↗

bioRxiv2024

Biofabrication of engineered tissues by 3D bioprinting of tissue specific high cell-density bioinks

Bioprinting of high cell-density bioinks is a promising technique for cellular condensation-based tissue engineering and regeneration medicine. However, it remains difficult to create precisely controlled complex structures and organization of tissues with high cell-density bioink-based bioprinting for tissue specific condensation. In this study, we present newly biofabricated tissues from directly assembled, tissue specific, high cell-density bioinks which have been three-dimensionally printed into a photocrosslinkable and biodegradable hydrogel microparticle supporting bath. Three types of tissue specific high cell-density bioinks have been prepared with individual stem cells or stem cell aggregates by incorporation of growth factor-loaded gelatin microparticles. The bioprinted tissue specific high cell-density bioinks in the photocrosslinked microgel supporting bath condense together and differentiate down tissue-specific lineages to form multi-phase tissues (e.g., osteochondral tissues). By changing the growth factors and cell types, these tissue specific high cell-density bioinks enable engineering of various functional tissues with controlled architecture and organization of cells.

bioengineering↗

bioRxiv2023

Conductive microgel annealed scaffolds enhance myogenic potential of myoblastic cells

Bioelectricity is an understudied phenomenon to guide tissue homeostasis and regeneration. Conductive biomaterials may capture native or exogenous bioelectric signaling, but incorporation of conductive moieties is limited by cytotoxicity, poor injectability, or insufficient stimulation. Microgel annealed scaffolds are promising as hydrogel-based materials due to their inherent void space that facilitates cell migration and proliferation better than nanoporous bulk hydrogels. We generated conductive microgels from poly(ethylene) glycol and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) to explore the interplay of void volume and conductivity on myogenic differentiation. PEDOT:PSS increased microgel conductivity over 2-fold while maintaining stiffness, annealing strength, and viability of associated myoblastic cells. C2C12 myoblasts exhibited increases in the late-stage differentiation marker myosin heavy chain as a function of both porosity and conductivity. Myogenin, an earlier marker, was influenced only by porosity. Human skeletal muscle derived cells exhibited increased Myod1, IGF-1, and IGFBP-2 at earlier timepoints on conductive microgel scaffolds compared to non-conductive scaffolds. They also secreted higher levels of VEGF at early timepoints and expressed factors that led to macrophage polarization patterns observed during muscle repair. These data indicate that conductivity aids myogenic differentiation of myogenic cell lines and primary cells, motivating the need for future translational studies to promote muscle repair.

bioengineering↗

bioRxiv2022

Pharmacological hallmarks of allostery at the M4 muscarinic receptor elucidated through structure and dynamics

Allosteric modulation of G protein-coupled receptors (GPCRs) is a major paradigm in drug discovery. Despite decades of research, a molecular level understanding of the general principals that govern the myriad pharmacological effects exerted by GPCR allosteric modulators remains limited. The M4 muscarinic acetylcholine receptor (M4 mAChR) is a well-validated and clinically relevant allosteric drug target for several major psychiatric and cognitive disorders. Here, we present high-resolution cryo-electron microscopy structures of the M4 mAChR bound to a cognate Gi1 protein and the high affinity agonist, iperoxo, in the absence and presence of two different positive allosteric modulators, LY2033298 or VU0467154. We have also determined the structure of the M4 mAChR-Gi1 complex bound to its endogenous agonist, acetylcholine (ACh). Structural comparisons, together with molecular dynamics, mutagenesis, and pharmacological validations, have provided in-depth insights into the role of structure and dynamics in orthosteric and allosteric ligand binding, global mechanisms of receptor activation, cooperativity, probe-dependence, and species variability; all key hallmarks underpinning contemporary GPCR drug discovery.

pharmacology and toxicology↗

bioRxiv2021

Dynamics of GLP-1R peptide agonist engagement are correlated with kinetics of G protein activation

The glucagon-like peptide-1 receptor (GLP-1R) has broad physiological roles and is a validated target for treatment of metabolic disorders. Despite recent advances in GLP-1R structure elucidation, detailed mechanistic understanding of how different peptides generate profound differences in G protein-mediated signalling is still lacking. Here we have combined cryo-electron microscopy, molecular dynamics simulations, receptor mutagenesis and pharmacological assays, to interrogate the mechanism and consequences of GLP-1R binding by four peptide agonists; glucagon-like peptide-1, oxyntomodulin, exendin-4 and exendin-P5. These data revealed that distinctions in peptide N-terminal interactions and dynamics with the GLP-1R transmembrane domain are reciprocally associated with differences in the allosteric coupling to G proteins. In particular, transient interactions with residues at the base of the binding cavity correlate with enhanced kinetics for G protein activation, providing a rationale for differences in G protein-mediated signalling efficacy from distinct agonists.

biochemistry↗

bioRxiv2020

Evaluation of Alginate-Based Bioinks for 3D Bioprinting, Mesenchymal Stromal Cell Osteogenesis, and Application for Patient-Specific Bone Grafts

To realize the promise of 3D bioprinting, it is imperative to develop bioinks that possess the biological and rheological characteristics needed for the printing of cell-laden tissue grafts. Alginate is widely used as a bioink because its rheological properties can be modified through pre-crosslinking or the addition of thickening agents to increase printing resolution. However, modification of alginates physicochemical characteristics using common crosslinking agents can affect its cytocompatibility. Therefore, we evaluated the printability, physicochemical properties, and osteogenic potential of four common alginate bioinks: alginate-CaCl2 (alg-CaCl2), alginate-CaSO4 (alg-CaSO4), alginate-gelatin (alg-gel) and alginate-nanocellulose (alg-ncel) for the 3D bioprinting of patient-specific osteogenic grafts. While all bioinks possessed similar viscosity, printing fidelity was lower in the pre-crosslinked bioinks. When used to print geometrically defined constructs, alg-CaSO4 and alg-ncel exhibited higher mechanical properties and lower mesh size than those printed with alg-CaCl2 or alg-gel. The physical properties of these constructs affected the biological performance of encapsulated bone marrow-derived mesenchymal stromal cells (MSCs). Cell-laden constructs printed using alg-CaSO4 and alg-ncel exhibited greater cell apoptosis and contained fewer living cells 7 days post-printing. In addition, effective cell-matrix interactions were only observed in alg-CaCl2 printed constructs. When cultured in osteogenic media, MSCs in alg-CaCl2 constructs exhibited increased osteogenic differentiation compared to the other three bioinks. This bioink was then used to 3D print anatomically accurate cell-laden scaphoid bones that were capable of partial mineralization after 14 days of in vitro culture. These results highlight the importance of bioink properties to modulate cell behavior and the biofabrication of clinically relevant bone tissues.

bioengineering↗

bioRxiv2020

Hydrogel mechanical properties are more important than osteoinductive growth factors for bone formation with MSC spheroids

Mesenchymal stromal cells (MSCs) can promote tissue repair in regenerative medicine, and their therapeutic potential is further enhanced via spheroid formation. We demonstrated that intraspheroidal presentation of Bone Morphogenetic Protein-2 (BMP-2) on hydroxyapatite (HA) nanoparticles resulted in more spatially uniform MSC osteodifferentiation, providing a method to internally influence spheroid phenotype. Stress relaxation of hydrogels has emerged as a potent stimulus to enhance monodispersed MSC spreading and osteogenic differentiation, but the effect of hydrogel viscoelasticity on MSC spheroids has not been reported. Herein, we describe a materials-based approach to augment the osteogenic potential of entrapped MSC spheroids by leveraging the mechanical properties of alginate hydrogels. Compared to spheroids entrapped in covalently crosslinked, elastic alginate, calcium deposition of MSC spheroids was consistently increased in ionically crosslinked, viscoelastic alginate. We observed significant increases in calcium deposition by MSC spheroids loaded with BMP-2-HA in viscoelastic gels compared to soluble BMP-2, which was higher than all elastic alginate gels. Upon implantation in critically sized calvarial bone defects, we observed enhanced bone formation in all animals treated with viscoelastic hydrogels. Increases in bone formation were evident in viscoelastic gels, regardless of the mode of presentation of BMP-2 (i.e., soluble delivery or HA nanoparticles). These studies demonstrate that the dynamic mechanical properties of viscoelastic alginate are an effective strategy to enhance the therapeutic potential of MSC spheroids for bone formation and repair.

bioengineering↗

bioRxiv2019

Tunable Fibrin-Alginate Interpenetrating Network Hydrogels to Guide Cell Behavior

Hydrogels are effective platforms for use as artificial extracellular matrices, cell carriers, and to present bioactive cues. Two common natural polymers, fibrin and alginate, are broadly used to form hydrogels and have numerous advantages over synthetic materials. Fibrin is a provisional matrix containing native adhesion motifs for cell engagement, yet the interplay between mechanical properties, degradation, and gelation rate is difficult to decouple. Conversely, alginate is highly tunable yet bioinert and requires modification to present necessary adhesion ligands. To address these challenges, we developed a fibrin-alginate interpenetrating network (IPN) hydrogel to combine the desirable adhesion and stimulatory characteristics of fibrin with the tunable mechanical properties of alginate. We tested its efficacy by examining capillary network formation with entrapped co-cultures of mesenchymal stromal cells (MSCs) and endothelial cells (ECs). We manipulated thrombin concentration and alginate crosslinking density independently to modulate the fibrin structure, mesh size, degradation, and biomechanical properties of these constructs. In IPNs of lower stiffness, we observed a significant increase in total cell area (1.72x105 {+/-} 7.9x104 m2) and circularity (0.56 {+/-} 0.03) compared to cells encapsulated in stiffer IPNs (3.98x104 {+/-} 1.49x104 m2 and 0.77 {+/-} 0.09, respectively). Fibrinogen content did not influence capillary network formation. However, higher fibrinogen content led to greater retention of these networks confirmed via increased spreading and presence of F-actin at 7 days. This is an elegant platform to decouple cell adhesion and hydrogel bulk stiffness that will be broadly useful for cell instruction and delivery.

bioengineering↗