Search bioRxiv⌕ Search

Biology subjects

Kunwar, P.

Publications and source records attributed to Kunwar, P..

4 recordsLinked to original sources

CELLNET technology: Spatially organized, functional 3D networks at single cell resolution

Cells possess the remarkable ability to generate tissue-specific 3D interconnected networks and respond to a wide range of stimuli. Understanding the link between the spatial arrangement of individual cells and their networks emergent properties is necessary for the discovery of both fundamental biology as well as applied therapeutics. However, current methods spanning from lithography to 3D photo-patterning to acoustofluidic devices are unable to generate interconnected and organized single cell 3D networks within native extracellular matrix (ECM). To address this challenge, we report a novel technology coined as CELLNET. This involves the generation of crosslinked collagen within multi-chambered microfluidic devices followed by femtosecond laser ablation of 3D microchannel networks and cell seeding. Using model cells, we show that cell migrate within ablated networks within hours, self-organize and form viable, interconnected, 3D networks in custom architectures such as square grid, concentric circle, parallel lines, and spiral patterns. Heterotypic CELLNETs can also be generated by seeding multiple cell types in side-chambers of the devices. The functionality of cell networks can be studied by monitoring the real-time calcium signaling response of individual cells and signal propagation within CELLNETs when subjected to flow stimulus alone or a sequential combination of flow and biochemical stimuli. Furthermore, user-defined disrupted CELLNETs can be generated by lethally injuring target cells within the 3D network and analyzing the changes in their signaling dynamics. As compared to the current self-assembly based methods that exhibit high variability and poor reproducibility, CELLNETs can generate organized 3D single-cell networks and their real-time signaling responses to a range of stimuli can be accurately captured using simple cell seeding and easy-to-handle microfluidic devices. CELLNET, a new technology agnostic of cell types, ECM formulations, 3D cell-connectivity designs, or location and timing of network disruptions, could pave the way to address a range of fundamental and applied bioscience applications. TeaserNew technology to generate 3D single cell interconnected and disrupted networks within natural extracellular matrix in custom configurations.

bioengineering↗

Droplet bioprinting of acellular and cell-laden structures at high-resolutions

Advances in Digital Light Processing (DLP) based (bio) printers have made printing of intricate structures at high resolution possible using a wide range of photosensitive bioinks. A typical setup of a DLP bioprinter includes a vat or reservoir filled with liquid bioink, which presents challenges in terms of cost associated with bioink synthesis, high waste, and gravity-induced cell settling, contaminations, or variation in bioink viscosity during the printing process. Here, we report a vat-free, low-volume, waste-free droplet bioprinting method capable of rapidly printing 3D soft structures at high resolution using model bioinks. A multiphase many-body dissipative particle dynamics (mDPD) model was developed to simulate the dynamic process of droplet-based DLP printing and elucidate the roles of surface wettability and bioink viscosity. Process variables such as light intensity, photo-initiator concentration, and bioink formulations were optimized to print 3D soft structures ([~]0.4 to 3 kPa) with an XY resolution of 38 {+/-} 1.5 m and Z resolution of 237{+/-}5.4 m. To demonstrate its versatility, droplet bioprinting was used to print a range of acellular 3D structures such as a lattice cube, a Mayan pyramid, a heart-shaped structure, and a microfluidic chip with endothelialized channels. Droplet bioprinting, performed using model C3H/10T1/2 cells, exhibited high viability (90%) and cell spreading. Additionally, microfluidic devices with internal channel network lined with endothelial cells showed robust monolayer formation while osteoblast-laden constructs showed mineral deposition upon osteogenic induction. Overall, droplet bioprinting could be a low-cost, no-waste, easy-to-use, method to make customized bioprinted constructs for a range of biomedical applications.

bioengineering↗

Meniscus-enabled Projection Stereolithography (MAPS)

Light-based additive manufacturing methods have been widely used to print high-resolution 3D structures for applications in tissue engineering, soft robotics, photonics, and microfluidics, among others. Despite this progress, multi-material printing with these methods remains challenging due to constraints associated with hardware modifications, control systems, cross-contaminations, waste, and resin properties. Here, we report a new printing platform coined Meniscus-enabled Projection Stereolithography (MAPS), a vat-free method that relies on generating and maintaining a resin meniscus between a crosslinked structure and bottom window and to print lateral, vertical, discrete, or gradient multi-material 3D structures with little-to-no cross-contamination or waste. We also show that MAPS is compatible with a wide range of resins and can print complex multi-material 3D structures without requiring specialized hardware, software, or complex washing protocols. MAPSs ability to print structures with microscale variations in mechanical stiffness, opacity, surface energy, cell densities, and magnetic properties provides a generic method to make advanced materials for a broad range of applications.

bioengineering↗

Printing double network tough hydrogels using Temperature-Controlled Projection Stereolithography (TOPS)

We report a new method to shape double-network (DN) hydrogels into customized microscale 3D structures that exhibit superior mechanical properties in both tension and compression. A one-pot prepolymer formulation containing photo-cross-linkable acrylamide and thermo-reversible sol-gel {kappa}-carrageenan with a suitable crosslinker, and photo-initiator/absorbers are optimized. A new TOPS system is utilized to photo-polymerize the primary acrylamide network into a 3D structure above the sol-gel transition of {kappa}-carrageenan (80{degrees}C), while cooling down generates the secondary physical {kappa}-carrageenan network to realize tough DN hydrogel structures. 3D structures, printed with high lateral (37m) and vertical (180m) resolutions and superior 3D design freedoms (internal voids), exhibit ultimate stress and strain of 200 kPa and 2400% respectively under tension, and simultaneously exhibit high compression stress of 15 MPa with a strain of 95%, both with high recovery rates. The roles of swelling, necking, self-healing, cyclic loading, dehydration, and rehydration on the mechanical properties of printed structures are also investigated. To demonstrate the potential of this technology to make mechanically reconfigurable flexible devices, we print an axicon lens and show that a Bessel beam can be dynamically tuned via user-defined tensile stretching of the device. This technique can be broadly applied to other hydrogels to make novel smart multifunctional devices for a range of applications.

bioengineering↗