Pausing after clap reduces power required to fling wings apart at low Reynolds number
The smallest flying insects such as thrips (body length < 2 mm) are challenged with needing to move in air at chord-based Reynolds number (Rec) on the order of 10. Pronounced viscous dissipation at such low Rec requires considerable energetic expenditure for tiny insects to stay aloft. Free-flying thrips flap their densely bristled wings at large stroke amplitudes, bringing both wings in close proximity of each other at the end of upstroke ( clap) and moving their wings apart at the start of downstroke ( fling). From high-speed videos of free-flying thrips, we observed that their forewings remain clapped for approximately 10% of the wingbeat cycle before start of fling. We sought to examine if there are aerodynamic advantages associated with pausing wing motion after clap and before fling at Rec=10. A dynamically scaled robotic clap-and-fling platform was used to measure lift and drag forces generated by physical models of non-bristled (solid) and bristled wing pairs for pause times ranging between 0% to 41% of the cycle. In both solid and bristled wings, varying pause time showed no effect on average force coefficients generated within each half-stroke. This was supported by nearly identical time-variation of circulation of the leading and trailing edge vortices for different pause times. At smaller pause times, bristled wings showed larger reduction of cycle-averaged drag coefficient as compared to that of solid wings. For a given wing design (solid or bristled), the ratio of cycle-averaged lift coefficient to cycle-averaged drag coefficient was unchanged across different pause times. We observed 13.5% drop in cycle-averaged power coefficient and 3% drop in cycle-averaged lift coefficient when moving from 0% pause to 9% pause duration. Our results suggest that pausing at the end of clap can be beneficial for reducing the power required to fling, with a small reduction in lift.