Biology subjects

Jacobs, T. B.

Publications and source records attributed to Jacobs, T. B..

14 recordsLinked to original sources

bioRxiv2026

Arabidopsis BAG proteins regulate cellulose synthase stability

Cellulose synthase complexes (CSCs) synthesize cellulose at the plasma membrane, and their activity and trafficking are critical for maintaining cell wall integrity during plant growth. Clathrin-mediated endocytosis (CME) regulates CSC internalization and has been implicated in their rapid stress-induced removal from the plasma membrane. Stress adaptation, instead, requires the maintenance of a subset of CSCs at the plasma membrane, yet the mechanisms underlying this homeostasis remain poorly understood. The Arabidopsis Bcl-2-associated athanogene4 (BAG4) was identified as an interactor of the adaptor protein 2 complex (AP-2) and the TPLATE complex (TPC), two key components of plant CME. Here, we show that AP-2 and the TPC associated with four closely related BAG proteins, BAG1-BAG4. A quadruple mutant exhibited abnormal growth, increased sensitivity to salt stress, and reduced endocytic flux. However, the abundance, localization and dynamics of CME machinery was largely unaffected, suggesting that BAG proteins are not core regulators of CME. Instead, BAG1-BAG4 deficiency caused hypersensitivity to cellulose biosynthesis inhibitors and impaired hypocotyl elongation in darkness, consistent with defective cellulose-dependent growth. BAG1-BAG4 also interacted with CESA6, and salt-induced CESA6 degradation and ubiquitination was enhanced in the quadruple mutant. Together, these findings identify BAG1-BAG4 as redundant proteostasis factors that safeguard CESA6 stability during salt stress, thereby maintaining cellulose synthesis, cell wall integrity, and plant stress tolerance.

plant biology↗

bioRxiv2026

BackBone Builder (B3): A modular Golden Gate standard with a compatible Agrobacterium parts library

Agrobacterium-mediated transformation relies on binary vectors in which T-DNA and virulence genes are maintained on separate replicons. While Golden Gate cloning has become standard for T-DNA assembly, no modular framework exists for systematic construction of Agrobacterium vector backbones. Here, we present BackBone Builder (B3), a Golden Gate-based platform for combinatorial backbone assembly. B3 uses the Type IIS enzyme PaqCI to minimize domestication and enables one-pot assembly of nine backbone modules plus a selectable cloning cassette. The system is compatible with GreenGate and remains independent of downstream cloning strategies. We generated a library of 42 backbone components, supporting a theoretical design space exceeding 370,000 constructs. A 4 x 4 origin-of-replication (ORI) matrix combining four Escherichia coli and four Agrobacterium ORIs assembled with 100% efficiency and functioned robustly in bacterial and plant contexts. Reporter expression reflected expected ORI-dependent patterns in E. coli, Agrobacterium, and Nicotiana benthamiana. A B3-derived maize transformation backbone achieved stable transformation efficiencies comparable to established vectors. B3 establishes a standardized and extensible framework for rational engineering of Agrobacterium binary vector architecture.

plant biology↗

bioRxiv2025

Secretory carrier membrane proteins assist with aquaporin trafficking in Arabidopsis.

Aquaporins belonging to the plasma membrane intrinsic protein (PIP) subfamily are channel proteins that control water flow across cells, allowing plants to rapidly adjust hydraulic conductivity and thereby sustain growth, gas exchange, and recovery from drought. We show that secretory carrier membrane proteins (SCAMP) regulate the abundance of the aquaporins and thereby water transport in Arabidopsis root cells. SCAMPs are evolutionarily conserved multi-spanning transmembrane proteins. In animal cells, they function in secretion, endocytosis and autophagy. Knowledge on their role in plants is restricted to localization and trafficking experiments in heterologous systems and few genetic perturbation experiments. Here, we analysed all five members of the Arabidopsis SCAMP family. We identified conserved tyrosine motifs assisting in transport to the plasma membrane and N-terminally located NPF motifs that are required for internalization. SCAMPs dimerize both at the plasma membrane and endosomes, and dimerization is required for their internalization. Functionally, several PIPs were identified as common targets of multiple SCAMP isoforms. Triple and quintuple scamp mutants show mild developmental delay under standard growth conditions, but they are less sensitive to drought-induced leaf wilting. This observation cannot be explained by altered stomatal dynamics or densities, nor by differential soil water content. However, scamp mutant root protoplasts contain less PIPs and swell less under hypotonic conditions compared to wild type, indicating reduced PIP plasma membrane levels. In conclusion, our research identifies the SCAMP membrane trafficking proteins as regulators of PIP abundance at the plasma membrane in root cells. We propose that the reduced PIP levels in the scamp mutants act as a priming mechanism, allowing them to respond better to conditions of reduced water availability.

plant biology↗

bioRxiv2024

Consolidating Ulva functional genomics: Gene editing and new selection systems

The green seaweed Ulva compressa is a promising model for functional biology. In addition to historical research on growth and development, -omics data and molecular tools for stable transformation are available. However, more efficient tools are needed to study gene function. Here, we expand the molecular toolkit for Ulva. We screened the survival of Ulva and its mutualistic bacteria on 14 selective agents and establish that Blasticidin deaminases (BSD or bsr) can be used as selectable markers to generate stable transgenic lines. We show that Cas9 and Cas12a RNPs are suitable for targeted mutagenesis and can generate genomic deletions up to 20 kb using the marker gene ADENINE PHOSPHORIBOSYLTRANSFERASE (APT). We demonstrate that targeted insertion of a selectable marker via homology-directed repair or co-editing with APT is possible for non- marker genes. We evaluated 31 vector configurations and found that bicistronic fusion of Cas9 to a resistance marker or incorporation of introns in Cas9 led to the most mutants. We used this to generate mutants in three non-marker genes using a co-editing strategy. This expanded molecular toolkit now enables us to reliably make gain- and loss-of-function mutants, additional optimizations will be necessary to allow for vector-based multiplex genome editing in Ulva.

molecular biology↗

bioRxiv2023

Continual improvement of multiplex mutagenesis in Arabidopsis

CRISPR/Cas9 is currently the most powerful tool to generate mutations in plant genomes and more efficient tools are needed as the scale of experiments increases. In the model plant Arabidopsis, the choice of promoter driving Cas9 expression is critical to generate germline mutations. Several optimal promoters have been reported. However, it is unclear which promoter is ideal as they have not been thoroughly tested side-by-side. Furthermore, most plant vectors still use one of the two Cas9 nuclear localization sequence (NLS) configurations initially reported and can still be optimized. We genotyped more than 6,000 Arabidopsis T2 plants to test seven promoters and eleven NLS architectures across 14 targets to systematically improve the generation of single and multiplex inheritable mutations. We find that the RPS5A promoter and double-BP NLS architecture were individually the most efficient components. When combined, 99% of T2 plant contained at least one knockout mutation and 84% contained 4-7-plex knock-outs. These optimizations will be useful to generate higher-order knockouts in the germline of Arabidopsis and likely be applicable to other CRISPR systems as well.

synthetic biology↗

bioRxiv2022

SMAP design: A multiplex PCR amplicon and gRNA design tool to screen for natural and CRISPR-induced genetic variation

Multiplex amplicon sequencing is a versatile method to identify genetic variation in natural or mutagenized populations through eco-tilling or multiplex CRISPR screens. Such genotyping screens require reliable and specific primer designs, combined with simultaneous gRNA design for CRISPR screens. Unfortunately, current tools are unable to combine multiplex gRNA and primer design into a high-throughput and easy-to-use manner with high design flexibility. Here, we report the development of a bioinformatics tool called SMAP design to overcome these limitations. We tested SMAP design on several plant and non-plant genomes and obtained designs for more than 80-90% of the target genes, depending on the genome and gene family. We validated the primer designs with Illumina multiplex amplicon sequencing and Sanger sequencing in Arabidopsis and soybean. We also used SMAP design to perform eco-tilling by tilling PCR amplicons across nine candidate genes putatively associated with haploid induction in Cichorium intybus. We screened 60 accessions of chicory and witloof and identified thirteen knockout haplotypes and their carriers. SMAP design is an easy-to-use command-line tool that generates highly specific gRNA and/or primer designs for any number of loci for CRISPR or natural variation screens and is compatible with other SMAP modules for seamless downstream analysis.

plant biology↗

bioRxiv2022

Systematic optimization of Cas12a base editors in wheat and maize using the ITER platform

The ever-increasing number of CRISPR components creates a significant burden when developing new genome engineering tools. Plant biotechnology in particular has few high-throughput options to perform iterative design-build-test-learn cycles when creating new gene-editing reagents. We have established ITER (Iterative Testing of Editing Reagents) based on arrayed protoplast transfections and high-content imaging, allowing one optimization cycle - from design to results- within three weeks. We validated ITER in wheat and maize protoplasts using Cas9 cytosine and adenine base editors. Given that previous LbCas12a-ABEs have low or no activity in plants, we used ITER to develop an optimized LbCas12a-ABE. We show that the sequential improvement of five components -NLS, crRNA, LbCas12a, adenine deaminase and linker- led to a remarkable increase in ABE activity from almost undetectable levels to 40% on an extrachromosomal GFP reporter. We confirmed the activity of LbCas12a-ABE at endogenous targets and in stable wheat transformants and leveraged these improvements to develop a highly mutagenic LbCas12a nuclease and LbCas12a-CBE. Our data show that ITER is a sensitive, versatile, and high-throughput platform that can be harnessed to accelerate the development of genome editing technologies in plants.

synthetic biology↗

bioRxiv2022

BREEDIT: A novel multiplex genome editing strategy to improve complex quantitative traits in maize (Zea mays L.)

Ensuring food security for an ever-growing global population while adapting to climate change is the main challenge for agriculture in the 21st century. Though new technologies are being applied to tackle the problem, we are approaching a plateau in crop improvement using conventional breeding. Recent advances in gene engineering via the CRISPR/Cas technology pave the way to accelerate plant breeding and meet this increasing demand. Here, we present a gene discovery pipeline named BREEDIT that combines multiplex genome editing of whole gene families with crossing schemes to improve complex traits such as yield and drought resistance. We induced gene knockouts in 48 growth-related genes using CRISPR/Cas9 and generated a collection of over 1000 gene-edited maize plants. Edited populations displayed, on average, significant increases of 5 to 10% for leaf length and up to 20% for leaf width compared with controls. For each gene family, edits in subsets of genes could be associated with increased traits, allowing us to reduce the gene space needed to focus on for trait improvement. We propose BREEDIT as a gene discovery pipeline which can be rapidly applied to generate a diverse collection of mutants to identify subsets of promising candidates that could be later incorporated in breeding programs.

systems biology↗

bioRxiv2022

Simple and efficient modification of Golden Gate design standards and parts using oligo stitching

The assembly of DNA parts is a critical aspect of contemporary biological research. Gibson assembly and Golden Gate cloning are two popular options. Here, we explore the use of single stranded DNA oligos with Gibson assembly to augment Golden Gate cloning workflows in a process called "oligo stitching". Our results show that oligo stitching can efficiently convert Golden Gate parts between different assembly standards and directly assemble incompatible Golden Gate parts without PCR amplification. Building on previous reports, we show that it can also be used to assemble de novo sequences. As a final application, we show that restriction enzyme recognition sites can be removed from plasmids and utilize the same concept to perform saturation mutagenesis. Given oligo stitchings versatility and high efficiency, we expect that it will be a useful addition to the molecular biologists toolbox. Abstract Graphic O_FIG_DISPLAY_L [Figure 1] M_FIG_DISPLAY C_FIG_DISPLAY

synthetic biology↗

bioRxiv2020

A molecular toolkit for the green seaweed Ulva mutabilis

The green seaweed Ulva is an ecologically-important marine primary producer as well as a promising cash crop cultivated for multiple uses. Despite its importance, several molecular tools are still needed to better understand seaweed biology. Here, we report the development of a flexible and modular molecular cloning toolkit for the green seaweed Ulva mutabilis based on a Golden Gate cloning system. The toolkit presently contains 125 entry vectors, 26 destination vectors and 107 functionally validated expression vectors. We demonstrate the importance of endogenous regulatory sequences for transgene expression and characterize three endogenous promoters suitable to drive transgene expression. We describe two vector architectures to express transgenes via two expression cassettes or a bicistronic approach. The majority of selected transformants (50-80%) consistently give clear visual transgene expression. Furthermore, we made different marker lines for intracellular compartments after evaluating 13 transit peptides and 11 tagged endogenous Ulva genes. Our molecular toolkit enables the study of Ulva gain-of-function lines and paves the way for gene characterization and large-scale functional genomics studies in a green seaweed. One-sentence summaryMolecular cloning tools allow to generate gain-of-function seaweed lines that will help to study seaweed biology.

plant biology↗

bioRxiv2020

Efficient simultaneous mutagenesis of multiple genes in specific plant tissues by multiplex CRISPR

Multiplex CRISPR approaches enable mutating multiple genes in plants, however it is unclear how feasible this is in tissue-specific mutagenesis. Here we simultaneously mutated six genes either ubiquitously or exclusively in the root cap of Arabidopsis. The mutation frequencies for all target genes were positively correlated and unaffected by the order of gRNAs in the vector, indicating that efficient higher-order mutagenesis in specific plant tissues can be readily achieved.

plant biology↗

bioRxiv2020

Evidence-based gene expression modulation correlates with transposable element knock-down

BackgroundTransposable elements (TEs) are major components of plant genomes. Despite being regarded as "junk DNA" at first, TEs play important roles for the organisms they are found in. The most obvious and easily recognizable effects caused by TEs result from their mobility, which can disrupt coding sequences or promoter regions. However, with the recent advances in transcriptomics, it is becoming increasingly evident that TEs can act as an additional layer of gene expression regulation through a number of processes, which can involve production of non-coding RNAs. Here, we describe how Tnt1, a stress-responsive LTR-retrotransposon, interferes with gene expression and modulate a number of developmental aspects in tobacco. ResultsThrough an RNAi approach, we generated tobacco (HP) lines knocked-down for Tnt1 expression. Quantitative RT-PCR experiments confirm that Tnt1 is downregulated in HP lines after ethylene exposure. A RNA-seq experiment was performed and through two independent bioinformatic approaches (with different stringencies) we found 932 and 97 differentially expressed genes in HP lines. A number of phenotypes were observed in such lines, namely lesion mimicry in leaves, underdevelopment of the root system, overproduction of root hairs and early loss of seed viability. Folding prediction of part of the Tnt1 mRNA reveals putative stem-loop secondary structures containing transcriptional regulation sequences, suggesting it could be a source of small RNAs. We also propose a model to explain the Tnt1 expression in both homeostatic and stress conditions, and how it could interact with stress-responsive genes. ConclusionsOur results are consistent that interferences with Tnt1 transcript levels correlate with transcriptomic and phenotypic changes, suggesting a functional role for this element during plant development and stress response.

molecular biology↗

bioRxiv2020

Mutually opposing activity of PIN7 splicing isoforms is required for auxin-mediated tropic responses in Arabidopsis thaliana

Advanced transcriptome sequencing has uncovered that the majority of eukaryotic genes undergo alternative splicing (AS). Nonetheless, little effort has been dedicated to investigating the functional relevance of particular splicing events, even those in the key developmental and hormonal regulators. Here we reveal, in the plant model Arabidopsis thaliana, that the PIN7 gene, which encodes a polarly localized transporter for the phytohormone auxin, produces two evolutionary-conserved transcripts. These isoforms PIN7a and PIN7b, differing in a 4 amino acid motif, are present at nearly equal levels in most cells. Although both variants do not differ in the subcellular localization and transport auxin with similar capacity, they closely associate and mutually influence their stability within the plasma membrane. Phenotypic complementation tests reveal that the functional contribution of PIN7b per se is minor but it markedly attenuates the prominent PIN7a activity, which is required for correct seedling apical hook formation and auxin-mediated tropic responses. These results establish alternative splicing of the PIN family as a conserved, functionally-relevant mechanism, unveiling an additional regulatory level of auxin-mediated plant development.

plant biology↗

bioRxiv2018

CRISPR-TSKO facilitates efficient cell type-, tissue-, or organ-specific mutagenesis in Arabidopsis

Detailed functional analyses of many fundamentally-important plant genes via conventional loss-of-function approaches are impeded by severe pleiotropic phenotypes. In particular, mutations in genes that are required for basic cellular functions and/or reproduction often interfere with the generation of homozygous mutant plants, precluding further functional studies. To overcome this limitation, we devised a CRISPR-based tissue-specific knockout system, CRISPR-TSKO, enabling the generation of somatic mutations in particular plant cell types, tissues, and organs. In Arabidopsis, CRISPR-TSKO mutations in essential genes caused well-defined, localized phenotypes in the root cap, stomatal lineage, or entire lateral roots. The underlying modular cloning system allows for efficient selection, identification, and functional analysis of mutant lines directly in the first transgenic generation. The efficacy of CRISPR-TSKO opens new avenues to discover and analyze gene functions in spatial and temporal contexts of plant life while avoiding pleiotropic effects of system-wide loss of gene function.

plant biology↗