Biology subjects

Huso, W.

Publications and source records attributed to Huso, W..

8 recordsLinked to original sources

bioRxiv2025

DIA-PASEF Proteomic Profiling Reveals MpkA-Dependent Iron Stress Responses and Siderophore Biosynthesis in Aspergillus nidulans

Filamentous faungi play essential roles in biotechnology as producers of valuable bioproducts and, conversely, as opportunistic pathogens. Aspergillus nidulans is a widely used model organism for fungal genetics and cell biology; however, comprehensive proteomic references for this species remain limited. In this study, we applied a data-independent acquisition-parallel accumulation serial fragmentation (DIA-PASEF) approach to enable efficient and in-depth proteome profiling of A. nidulans. Leveraging ion mobility-based ion cloud information from DDA-PASEF experiments, we developed DIA-PASEF methods that identified 3,904 proteins across biological triplicates grown in rich medium. Compared to prior studies, this represents an increase in protein identifications of more than 140% and was achieved with more than five-fold reduction in analysis time. We employed this newly developed DIA-PASEF methodology to conduct both proteomic and phosphoproteomic analyses under iron-depleted conditions in an MpkA protein-kinase deficient mutant ({Delta}mpkA). The {Delta}mpkA strain exhibited expression of approximately 500 additional proteins and occupancy of over 1,800 additional phosphosites relative to a control. Differentially expressed and phosphorylated proteins increased by more than an order of magnitude in the {Delta}mpkA mutant across both iron-replete and iron-deplete conditions. Gene Ontology (GO) enrichment analysis revealed broader and distinct biological processes under iron-depleted conditions, highlighting adaptive responses specific to iron limitation and MAPK pathway disruption. This work establishes a high-coverage proteomic resource for A. nidulans and provides novel insights into fungal stress responses and signaling network perturbation. Importantly, high-throughput proteomic profiling reveals that limited iron availability and MAPK pathway disruption increases siderophore biosynthesis.

systems biology↗

bioRxiv2025

Chemical inhibition of asexual development leads to increased ultimate tensile strength in mycelial material.

This study investigates the chemical inhibition of asexual development in Aspergillus nidulans to enhance the mechanical properties of mycelial materials. We hypothesized that suppressing conidiation using the ornithine decarboxylase inhibitor -difluoromethylornithine (DFMO) would increase material strength by inhibiting asexual development, promoting denser hyphal packing. Mycelial materials were grown in DFMO concentrations (0, 0.05, 0.5, and 5 mM), and conidiation and ultimate tensile strength (UTS) were measured. Results showed a dose-dependent reduction in conidiation, with significant decreases at all DFMO levels (P [≤] 0.05). While lower DFMO concentrations (0.05 and 0.5 mM) did not significantly alter UTS, 5 mM DFMO treatment doubled the materials tensile strength compared to controls (P [≤] 0.05). Scanning electron microscopy confirmed reduced developmental structures in DFMO-treated samples, supporting the hypothesis. The non-linear relationship between conidiation suppression and strength improvement suggests additional mechanisms, such as hyphal morphology or cell wall changes, may contribute. These findings demonstrate that chemical modulation of fungal development can rationally tune mycelial material properties, offering a systematic approach for biomaterial engineering.

bioengineering↗

bioRxiv2025

The impact of fungal developmental structures on mechanical properties of mycelial materials.

This study explores how suppressing asexual development in Aspergillus nidulans enhances the mechanical properties of mycelial materials. Using four aconidial mutants ({Delta}brlA, {Delta}flbA, {Delta}fluG, and fadAG42R) that lack asexual development and a control strain (A28) that undergoes typical asexual development, we found that the absence of asexual development significantly improves mechanical strength. All mutants exhibited higher ultimate tensile strength (UTS) than the control, with {Delta}fluG and {Delta}brlA (fluffy nonsporulating, FNS phenotype) showing the highest UTS. Additionally, fadAG42R and {Delta}flbA (fluffy autolytic dominant, FAD phenotype) demonstrated significantly higher strain at failure (SF), linked to increased autolysis and lower dry cell mass compared to the control and FNS mutants. Solid-state NMR analysis revealed that autolysis in FAD mutants disrupts galactofuranose-related metabolic processes, altering cell wall composition and contributing to higher elasticity. These findings suggest that suppressing asexual development enhances mycelial material strength, while autolysis mechanisms influence elasticity. This research highlights the potential for genetic manipulation in fungi to engineer advanced mycelial-based materials with tailored mechanical properties.

bioengineering↗

bioRxiv2025

Synthetic Generation of Dynamic Omics Data Demonstrates Aspergillus nidulans BrlA Paradoxical Wall Stress Response

We propose a method to generate additional dynamic omics trajectories which could support pathway analysis methods such as enrichment analysis, genetic programming, and machine learning. Using long short-term memory neural networks, we can effectively predict an organisms dynamic response to a stimulus based on an initial dataset with relatively few samples. We present both an in silico proof of principle, based on a model that simulates viral propagation, and an in vitro case study, tracking the dynamics of Aspergillus nidulans BrlA transcript in response to antifungal agent micafungin. Our silico experiment was conducted using a highly noisy dataset with only 25 replicates. This proof of principle shows that this method can operate on biological datasets, which often have high variance and few replicates. Our in silico validation achieved a maximum R2 value of approximately 0.95 on our highly noisy, stochastically simulated data. Our in vitro validation achieves an R2 of 0.71. As with any machine learning application, this method will work better with more data; however, both of our applications attain acceptable validation metrics with very few biological replicates. The in vitro experiments also revealed a novel paradoxical dose-response effect: transcriptional upregulation by Aspergillus nidulans BrlA is highest at an intermediate dose of 10 ng/mL and is reduced at both higher and lower concentrations of micafungin.

genomics↗

bioRxiv2024

Aspergillus nidulans Transcription Factor BrlA is Utilized in a Conidiation-Independent Response to Cell-Wall Stress

Under synchronized conidiation, over 2500 gene products show differential expression, including transcripts for both brlA and abaA, which increase steadily over time. In contrast, during wall-stress induced by the echinocandin micafungin, the brlA transcript is upregulated while the abaA transcript is not. In addition, when mpkA (last protein kinase in the cell wall integrity signaling pathway) is deleted, brlA expression is not upregulated in response to wall stress. Together, these data imply BrlA may play a role in a cellular stress-response which is independent of the canonical BrlA-mediated conidiation pathway. To test this hypothesis, we performed a genome-wide search and found 332 genes with a putative BrlA response element (BRE) in their promoter region. From this set, we identified 28 genes which were differentially expressed in response to wall-stress, but not during synchronized conidiation. This set included seven gene products whose homologues are involved in transmembrane transport and 14 likely to be involved in secondary metabolite biosynthesis. We selected six of these genes for further examination and find that they all show altered expression behavior in the brlA deletion strain. Together, these data support the idea that BrlA plays a role in various biological processes outside asexual development. ImportanceThe Aspergillus nidulans transcription factor BrlA is widely accepted as a master regulator of conidiation. Here, we show that in addition to this function BrlA appears to play a role in responding to cell-wall stress. We note that this has not been observed outside A. nidulans. Further, BrlA-mediated conidiation is highly conserved across Aspergillus species, so this new functionality is likely relevant in other Aspergilli. We identified several transmembrane transporters that have altered transcriptional responses to cell-wall stress in a brlA deletion mutant. Based on our observation, together with what is known about the brlA gene locus regulation, we identify brlA{beta} as the likely intermediary in function of brlA in the response to cell-wall stress.

cell biology↗

bioRxiv2024

Aspergillus nidulans cell wall integrity kinase, MpkA, impacts cellular phenotypes that alter mycelial-material mechanical properties

Mycelial materials are an emerging, natural material made from filamentous fungi that have the potential to replace unsustainable materials used in numerous commercial applications (e.g., packaging, textiles, construction). Efforts to change the mechanical properties of mycelial-materials have typically involved altering growth medium, processing approaches, or fungal species. Although these efforts have shown varying levels of success, all approaches have shown there is a strong correlation between phenotype (of both fungal mycelia and mycelial materials assembly) and resultant mechanical properties. We hypothesize that genetic means can be used to generate specific fungal phenotypes, leading to mycelial materials with specific mechanical properties. To begin to test this hypothesis, we used a mutant of the model filamentous fungus, Aspergillus nidulans, with a deletion of the last kinase in the cell wall integrity (CWI) signaling pathway, mpkA. We generated one set of mycelial materials from the {Delta}mpkA deletion mutant (A1404), and another from its isogenic parent (A1405; control). When subjected to tensile testing, and compared to material generated from the control, {Delta}mpkA material has similar elastic modulus, but significantly increased ultimate tensile strength, and strain at failure. When subjected to a fragmentation assay (i.e., resistance to shear-stress), the {Delta}mpkA material also had higher relative mechanical strength. To determine possible causes for this behavior, we carried out a comprehensive set of phenotype assessments focused on: three-dimensional structure, hyphal morphology, hyphal growth behaviors, and conidial development. We find, compared to the control, material generated from the {Delta}mpkA mutant manifests significantly less development, a modified cell wall composition, larger diameter hyphae, more total biomass, higher water capacity and more densely packed material, which all appear to impact the altered mechanical properties.

bioengineering↗

bioRxiv2024

Using flux theory in dynamic omics data sets to identify differentially changing signals using DPoP

Derivative profiling (DP) is a novel approach to identify differential signals from dynamic omics data sets. This approach applies variable step-size differentiation to time dynamic omics data. This work assumes that there is a general omics derivative that is a useful and descriptive feature of dynamic omics experiments. We assert that this omics derivative, or omics flux, is a valuable descriptor that can be used instead of, or with, fold change calculations. The results of derivative profiling are compared to established methods such as Multivariate Adaptive Regression Splines (MARS), significance versus fold change analysis (Volcano), and an adjusted ratio over intensity (M/A) analysis to find that there is a statistically significant similarity between the results. This comparison is repeated for transcriptomic and phosphoproteomic expression profiles previously characterized in Aspergillus nidulans. This method has been packaged in an open-source, GUI-based MATLAB app, the Derivative Profiling omics Package (DPoP). Gene Ontology (GO) term enrichment has been included in the app so that a user can automatically/programmatically describe the over/under-represented GO terms in the derivative profiling results using domain specific knowledge found in their organisms specific GO database file. The advantage of the DPoP analysis is that it is computationally inexpensive, it does not require fold change calculations, it describes both instantaneous as well as overall behavior, and it achieves statistical confidence with signal trajectories of a single bio-replicate over four or more points. While we apply this method to time dynamic transcriptomic and phosphoproteomic datasets, it is a numerically generalizable technique that can be applied to any organism and any field interested in time series data analysis. The app described in this work enables omics researchers with no computer science background to apply derivative profiling to their data sets, while also allowing multidisciplined users to build on the nascent idea of profiling derivatives in omics.

bioinformatics↗

bioRxiv2024

Protein Kinases MpkA and SepH Transduce Crosstalk Between CWI and SIN Pathways to Activate Protective Hyphal Septation Under Echinocandin Cell Wall Stress

This study investigates a previously unreported stress signal transduced as crosstalk between the Cell Wall Integrity (CWI) pathway and the Septation Initiation Network (SIN). Echinocandins, which target cell wall synthesis, are widely used to treat mycoses. Their efficacy, however, is species specific; our findings suggest this is due largely to CWI-SIN crosstalk and the ability of filamentous species to fortify with septa in response to echinocandin stress. To better understand this crosstalk, we used a microscopy-based assay to measure septum density, aiming to understand the septation response to cell wall stress. The echinocandin micafungin, an inhibitor of {beta}-(1,3)-glucan synthase, was employed to induce this stress. We observed a strong positive correlation between micafungin treatment and septum density in wild-type strains. This finding suggests that CWI activates SIN under cell wall stress, increasing septum density to protect against cell wall failure. More detailed investigations, with targeted knockouts of CWI and SIN signaling proteins, enabled us to identify crosstalk occurring between the CWI kinase, MpkA, and the SIN kinase, SepH. This discovery, of previously unknown crosstalk between the CWI and SIN pathways, not only reshapes our understanding of fungal stress responses, but also unveils a promising new target pathway for the development of novel antifungal strategies. IMPORTANCEEchinocandin resistant species pose a major challenge in clinical mycology by rendering one of only four lines of treatment, notably one of the two that are well-tolerated, ineffective in treating systemic mycoses of these species. Previous studies have demonstrated that echinocandins fail against highly polarized fungi because they target only apical septal compartments. It is known that many filamentous species respond to cell wall stress with hyperseptation. In this work we show that echinocandin resistance hinges on this dynamic response, rather than on innate septation alone. We also unveil, for the first time, the signaling pathway used to deploy the hyperseptation response. By disabling this pathway, we were able to render mycelia susceptible to echinocandin stress. Hence, this work enhances our microbiological understanding of filamentous fungi and introduces a potential target to overcome echinocandin resistant species.

microbiology↗