Biology subjects

Heckenhauer, J.

Publications and source records attributed to Heckenhauer, J..

10 recordsLinked to original sources

bioRxiv2025

MBD2/3 lost its methyl-CpG binding ability in multiple families of Holometabola

DNA methylation is sparse in insects, compared to vertebrates. This reduction is even more pronounced in Holometabola, where the loss of DNA methyltransferases DNMT1 and DNMT3 has occurred several times. In some Holometabola, DNA methylation is lost entirely. Methyl-CpG-binding domain (MBD) proteins bind methylated CpGs and are therefore important readers of these epigenetic marks. We hypothesize that the evolutionary reduction of genome-wide methylation may be paralleled by changes to MBD proteins. Among insects, only a single MBD family member, MBD2/3, is known. Two isoforms of MBD2/3 have been identified in Bombyx mori, MBD2/3-L and MBD2/3-S. The long isoform MBD2/3-L contains a complete MBD domain spanning the first two exons, whereas the short isoform MBD2/3-S lacks the second exon and therefore half of its MBD domain. It has been reported that only the MBD2/3-L isoform is able to bind methyl-CpGs. In this study, we analyzed transcriptomic and genomic sequence data across holometabolous orders to identify MBD2/3 genes and their isoforms. Our findings reveal that MBD2/3 is highly conserved in sequence and gene structure. While both isoforms are present in most hemimetabolous orders, the long isoform MBD2/3-L, capable of binding methylated CpG, has been lost in multiple holometabolous orders. The results suggest that MBD2/3 has lost its ability to bind methyl-CpG in several insect orders, with several independent losses in Holometabola. This occurred through different changes to the MBD domain, from sequence divergence within the domain to the absence of half of the MBD domain. These losses may be linked to the reduced levels of CpG DNA methylation.

bioinformatics↗

bioRxiv2023

Evolution of Opsin Genes in Caddisflies (Insecta: Trichoptera)

Insects have evolved complex and diverse visual systems in which light-sensing protein molecules called opsins couple with a chromophore to form photopigments. Insect photopigments group into three major gene families based on wavelength sensitivity: long wavelength (LW), short wavelength (SW), and ultraviolet wavelength (UV). Here, we identified 123 opsin sequences from whole genome assemblies across 25 caddisfly species (Insecta: Trichoptera). We discovered the LW opsins have the most diversity across species and form two separate clades in the opsin gene tree. Conversely, we observed a loss of the SW opsin in half of the trichopteran species in this study, which might be associated with the fact that caddisflies are active during low-light conditions. Lastly, we found a single copy of the UV opsin in all the species in this study, with one exception: Athripsodes cinereus has two copies of the UV opsin and resides within a clade of caddisflies with colorful wing patterns. SignificanceWhile opsin evolution in some insect groups has been well-characterized, it has never been studied across caddisflies. Our findings provide insight into the diversity of opsins in caddisflies and form a basis for further research into the evolutionary drivers and complex visual systems in Trichoptera.

genomics↗

bioRxiv2022

Structural diversity of silk heavy-chain fibroins across major caddisfly (Trichoptera) clades

BackgroundLarvae of Trichoptera produce silk to build various underwater structures allowing them to exploit a wide range of aquatic environments. The heavy chain fibroin (h-fibroin) gene encodes the primary protein component of their silk. Studies on this long (>20 kbp) and highly repetitive gene have been limited by difficulties in its sequence assembly. Recently, high-quality long-read sequencing techniques have been successfully applied to obtain the full-length h-fibroin sequence. ResultsWe used three new and five previously published genomes to identify eight full-length h-fibroin gene and protein sequences of h-fibroin across the order Trichoptera covering various endpoints of the diversity of ecological silk use in caddisflies. We analyze these together with four existing high-quality h-fibroin sequences. Across the order, we observed conserved patterns in h-fibroin (high similarity of amino(n)-/carboxyl(c)-termini, presence of characteristic repeating structural modules). However, the sequence, number, and arrangement of these repeating modules varied across clades with increasing structural complexity of h-fibroin in fixed retreat and tube-case builders compared to cocoon-builders. We also found a higher percentage of proline in fixed-retreat makers. ConclusionThis study provides characterizations of the primary structure of h-fibroin from a diverse set of caddisflies. The interplay of conserved termini and basic motif structure with high variation in repeating modules as well as the variation in the percentage of proline might be linked to differences in mechanical properties (i.e., tensile strength, toughness) related to the different silk usage. This sets a starting point for future studies to screen and correlate amino acid motifs and other sequence features with quantifiable silk properties.

genomics↗

bioRxiv2022

Realizing the promise of biodiversity genomics with highly accurate long reads

BackgroundGenerating the most contiguous, accurate genome assemblies given available sequencing technologies is a long-standing challenge in genome science. With the rise of long-read sequencing, assembly challenges have shifted from merely increasing contiguity to correctly assembling complex, repetitive regions of interest, ideally in a phased manner. At present, researchers largely choose between two types of long read data: longer, but less accurate sequences, or highly accurate, but shorter reads (i.e., >Q20 or 99% accurate). To better understand how these types of long-read data as well as scale of data (i.e., mean length and sequencing depth) influence genome assembly outcomes, we compared genome assemblies for a caddisfly, Hesperophylax magnus, generated with longer, but less accurate, Oxford Nanopore (ONT) R9.4.1 and highly accurate PacBio HiFi (HiFi) data. Next, we expanded this comparison to consider the influence of highly accurate long-read sequence data on genome assemblies across 6,750 plant and animal genomes. For this broader comparison, we used HiFi data as a surrogate for highly accurate long-reads broadly as we could identify when they were used from GenBank metadata. ResultsHiFi reads outperformed ONT reads in all assembly metrics tested for the caddisfly data set and allowed for accurate assembly of the repetitive [~]20 Kb H-fibroin gene. Across plants and animals, genome assemblies that incorporated HiFi reads were also more contiguous. For plants, the average HiFi assembly was 501% more contiguous (mean contig N50 = 20.5 Mb) than those generated with any other long-read data (mean contig N50 = 4.1 Mb). For animals, HiFi assemblies were 226% more contiguous (mean contig N50 = 20.9 Mb) versus other long-read assemblies (mean contig N50 = 9.3 Mb). In plants, we also found limited evidence that HiFi may offer a unique solution for overcoming genomic complexity that scales with assembly size. ConclusionsHighly accurate long-reads generated with HiFi or analogous technologies represent a key tool for maximizing genome assembly quality for a wide swath of plants and animals. This finding is particularly important when resources only allow for one type of sequencing data to be generated. Ultimately, to realize the promise of biodiversity genomics, we call for greater uptake of highly accurate long-reads in future studies.

genomics↗

bioRxiv2022

Conservation of three-dimensional structure in Lepidoptera and Trichoptera L-fibroins for 290 million years

The divergence of sister orders, Trichoptera (caddisflies) and Lepidoptera (moths and butterflies), from a silk-spinning ancestor occurred around 290 million years ago. Trichoptera larvae are mainly aquatic and Lepidoptera larvae are almost entirely terrestrial, distinct habitats that required molecular adaptation of their silk for deployment in water versus air. The major protein components of their silks are Heavy chain and Light chain fibroins. In an effort to identify molecular changes in L-fibroins that may have contributed to the divergent use of silk in water versus air, we used the ColabFold implementation of AlphaFold2 to predict three-dimensional structures of L-fibroins from both orders. Comparison of the structures revealed that despite the ancient divergence, profoundly different habitats, and low sequence conservation, a 10-helix core structure was strongly conserved in L-fibroins from both orders. Previously known intra- and intermolecular disulfide linkages were accurately predicted. Structure variations observed outside of the core may represent molecular changes that contributed to the evolution of silks adapted to water or air. The distributions of electrostatic potential, for example, are not conserved and present distinct order-specific surfaces for potential interactions with or modulation by external factors. Also, the interactions of L-fibroins with the H-fibroin C-termini are different between the orders; lepidopteran L-fibroins have N-terminal insertions, not present in trichopteran L-fibroins, which form an unstructured ribbon in isolation but become part of an intermolecular {beta}-sheet when folded with their corresponding H-fibroin C-termini. The results may serve as another example of protein structure prediction from deep sequence data of understudied proteins made possible by AlphaFold2.

evolutionary biology↗

bioRxiv2022

Long-read HiFi Sequencing Correctly Assembles Repetitive heavy fibroin Silk Genes in New Moth and Caddisfly Genomes

Insect silk is an incredibly versatile biomaterial. Lepidoptera and their sister lineage, Trichoptera, display some of the most diverse uses of silk with varying strength, adhesive qualities and elastic properties. It is well known that silk fibroin genes are long (> 20 kb) and have many repetitive motifs. These features make these genes challenging to sequence. Most research thus far has focused on conserved N- and C-terminal regions of fibroin genes because a full comparison of repetitive regions across taxa has not been possible. Using the PacBio Sequel II system and SMRT sequencing, we generated high fidelity (HiFi) long-read genomic and transcriptomic sequences for the Indianmeal moth (Plodia interpunctella) and genomic sequences for the caddisfly, Eubasilissa regina. Both genomes were highly contiguous (N50 = 9.7 Mbp/32.4 Mbp, L50 = 13/11) and complete (BUSCO Complete = 99.3%/95.2%), with complete and contiguous recovery of silk heavy fibroin gene sequences. This study demonstrates that HiFi long-read sequencing can significantly help our understanding of genes with highly contiguous, repetitive regions.

genomics↗

bioRxiv2022

Repetitive elements in the era of biodiversity genomics: insights from 600+ insect genomes

Repetitive elements (REs) are integral to the composition, structure, and function of eukaryotic genomes, yet remain understudied in most taxonomic groups. We investigated REs across 601 insect species and report wide variation in REs dynamics across groups. Analysis of associations between REs and protein-coding genes revealed dynamic evolution at the interface between REs and coding regions across insects, including notably elevated RE-gene associations in lineages with abundant long interspersed nuclear elements (LINEs). We leveraged this large, empirical data set to quantify impacts of long-read technology on RE detection and investigate fundamental challenges to RE annotation in diverse groups. In long-read assemblies we detected [~]36% more REs than short-read assemblies, with long terminal repeats (LTRs) showing 162% increased detection, while DNA transposons and LINEs showed less respective technology-related bias. In most insect lineages, 25-85% of repetitive sequences were "unclassified" following automated annotation, compared to only [~]13% in Drosophila species. Although the diversity of available insect genomes has rapidly expanded, we show the rate of community contributions to RE databases has not kept pace, preventing efficient annotation and high-resolution study of REs in most groups. We highlight the tremendous opportunity and need for the biodiversity genomics field to embrace REs and suggest collective steps for making progress towards this goal.

genomics↗

bioRxiv2021

Genome size evolution in the diverse insect order Trichoptera

BackgroundGenome size is implicated in form, function, and ecological success of a species. Two principally different mechanisms are proposed as major drivers of eukaryotic genome evolution and diversity: Polyploidy (i.e., whole genome duplication: WGD) or smaller duplication events and bursts in the activity of repetitive elements (RE). Here, we generated de novo genome assemblies of 17 caddisflies covering all major lineages of Trichoptera. Using these and previously sequenced genomes, we use caddisflies as a model for understanding genome size evolution in diverse insect lineages. ResultsWe detect a ~14-fold variation in genome size across the order Trichoptera. We find strong evidence that repetitive element (RE) expansions, particularly those of transposable elements (TEs), are important drivers of large caddisfly genome sizes. Using an innovative method to examine TEs associated with universal single copy orthologs (i.e., BUSCO genes), we find that TE expansions have a major impact on protein-coding gene regions, with TE-gene associations showing a linear relationship with increasing genome size. Intriguingly, we find that expanded genomes preferentially evolved in caddisfly clades with a higher ecological diversity (i.e., various feeding modes, diversification in variable, less stable environments). ConclusionOur findings provide a platform to test hypotheses about the potential evolutionary roles of TE activity and TE-gene associations, particularly in groups with high species, ecological, and functional diversities.

evolutionary biology↗

bioRxiv2021

Long-reads are revolutionizing 20 years of insect genome sequencing

The first insect genome (Drosophila melanogaster) was published two decades ago. Today, nuclear genome assemblies are available for a staggering 601 insect species representing 20 orders. In this study, we analyzed the most-contiguous assembly for each species and provide a "state of the field" perspective, emphasizing taxonomic representation, assembly quality, gene completeness, and sequencing technologies. Relative to species richness, genomic efforts have been biased towards four orders (Diptera, Hymenoptera, Collembola, and Phasmatodea), Coleoptera are underrepresented, and 11 orders still lack a publicly available genome assembly. The average insect genome assembly is 439.2 megabases in length with 87.5% of single-copy benchmarking genes intact. Most notable has been the impact of long-read sequencing; assemblies that incorporate long-reads are ~48x more contiguous than those that do not. We offer four recommendations as we collectively continue building insect genome resources: (1) seek better integration between independent research groups and consortia, (2) balance future sampling between filling taxonomic gaps and generating data for targeted questions, (3) take advantage of long read sequencing technologies, and (4) expand and improve gene annotations. Significance statementSince the first insect genome was sequenced ~20 years ago, sequencing technologies and the availability of insect genome assemblies have both advanced dramatically. In this study, we curated, analyzed, and summarized the field of insect genomics in terms of taxonomic representation, assembly quality, gene completeness, and sequencing technology. We show that 601 insect species have genome assemblies available, with some groups heavily overrepresented (e.g., Diptera) relative to others (e.g., Coleoptera). The major takeaway of our study is that genome assemblies produced with long reads are ~48x more contiguous than short read assemblies.

genomics↗

bioRxiv2020

Draft Genome Assemblies and Annotations of Agrypnia vestita Walker, and Hesperophylaxmagnus Banks Reveal Substantial Repetitive Element Expansion in Tube Case-making Caddisflies (Insecta: Trichoptera)

Trichoptera (caddisflies) play an essential role in freshwater ecosystems; for instance, larvae process organic material from the water and are food for a variety of predators. Knowledge on the genomic diversity of caddisflies can facilitate comparative and phylogenetic studies thereby allowing scientists to better understand the evolutionary history of caddisflies. While Trichoptera are the most diverse aquatic insect order, they remain poorly represented in terms of genomic resources. To date, all long-read based genomes have been sequenced from individuals in the retreat-making suborder, Annulipalpia, leaving [~]275 Ma of evolution without high-quality genomic resources. Here, we report the first long-read based de novo genome assemblies of two tube case-making Trichoptera from the suborder Integripalpia, Agrypnia vestita Walker and Hesperophylax magnus Banks. We find that these tube case-making caddisflies have genome sizes that are at least three-fold larger than those of currently sequenced annulipalpian genomes and that this pattern is at least partly driven by major expansion of repetitive elements. In H. magnus, long interspersed nuclear elements (LINEs) alone exceed the entire genome size of some annulipalpian counterparts suggesting that caddisflies have high potential as a model for understanding genome size evolution in diverse insect lineages. SignificanceThere is a lack of genomic resources for aquatic insects. So far, only three high-quality genomes have been assembled, all from individuals in the retreat-making suborder Annulipalpia. In this article, we report the first high-quality genomes of two case-making species from the suborder Integripalpia, which are essential for studying genomic diversity across this ecologically diverse insect order. Our research reveals larger genome sizes in the tube case-makers (suborder Integripalpia, infraorder Phryganides), accompanied by a disproportionate increase of repetitive DNA. This suggests that genome size is at least partly driven by a major expansion of repetitive elements. Our work shows that caddisflies have high potential as a model for understanding how genomic diversity might be linked to functional diversification and forms the basis for detailed studies on genome size evolution in caddisflies. Data depositionThis project has been deposited at NCBI under the Bioproject ID: PRJNA668166

genomics↗