Biology subjects

Duru, J.

Publications and source records attributed to Duru, J..

11 recordsLinked to original sources

bioRxiv2026

Spatially defined axonal guidance in neural organoids with micropatterned microfluidic channels

Three-dimensional stem cell-derived neural organoids provide a promising platform for investigating early brain development and interregional circuit formation. Although co-culture of region-specific organoids into assembloids has enabled the study of cortical and subcortical interactions, these models lack directional specificity and spatial control, limiting their ability to recapitulate canonical circuit architecture. Here, we present a microfluidic platform for constructing directional and tunable interregional circuits while preserving anatomical distinction. This system, which we term "directoids" incorporates micropatterned polydimethylsiloxane (PDMS) microstructures to control uni- and bidirectional axonal growth between cortical and thalamic organoids. We observed a 70.4% success rate of axons traversing the full channel length in the permissive direction and reaching the opposing organoid, whereas no neurites successfully crossed the probative direction. These results demonstrate robust directionally bias in axon outgrowth and establish a scalable, reproducible strategy for controlling asymmetric connectivity between anatomically distinct neural organoids. Using high-density CMOS microelectrode arrays, we further validated directional tuning of extracellular action potential propagation within directoid microchannels, a feature not observed in straight-channel connectoid controls. Directoids also exhibited significant asymmetry in firing rates between channel entry and exit sites, consistent with engineered bias in signal flow. This provides an experimental paradigm for dissecting how anatomical connectivity and functional activity converge to shape neuronal networks. Together, these findings establish a microfluidic platform for investigating the mechanisms underlying hierarchical circuit formation, regional specification, and functional integration in developing human neural organoid models at cellular resolution not possible in vivo.

bioengineering↗

bioRxiv2025

An Integrated In Vitro Platform and Biophysical Modeling Approach for Studying Synaptic Transmission in Isolated Neuronal Pairs

Studying synaptic transmission and plasticity is facilitated in experimental systems that isolate individual neuronal connections. We developed an integrated platform combining polydimethylsiloxane (PDMS) microstructures with high-density microelectrode arrays to isolate and record single neuronal pairs from human induced pluripotent stem cell (hiPSC)-derived neurons. The system maintained hundreds of parallel neuronal pairs for over 100 days, demonstrating functional synapses through pharmacological validation and long-term potentiation studies. We coupled this platform with a biophysical Hodgkin-Huxley model and simulation-based inference to extract mechanistic parameters from electrophysiological data. The analysis of long-term potentiation stimulation using a biophysical model revealed (-amino-3-hydroxy-5-methyl-4-isoxazole propionic acid) AMPA and (N-methyl-D-aspartate) NMDA receptor-specific alterations, providing quantitative insights into synaptic plasticity mechanisms. This integrated approach represents the first system combining isolated synaptic pairs, long-term stability, and mechanistic modeling, offering unprecedented opportunities for studying human synaptic function and plasticity.

neuroscience↗

bioRxiv2025

An in vitro platform for characterizing axonal electrophysiology of individual human iPSC-derived nociceptors

Current treatments against severe forms of neuropathic pain demonstrate insufficient efficacy or lead to unwanted side effects as they fail to specifically target the affected nociceptors - a specialized subclass of sensory neurons conveying potentially damaging stimuli information to the central nervous system. Neuropathic pain may involve different nociceptor subtypes in different patients. Tools that can distinguish nociceptive axons would enable a more targeted compound screening. Therefore, we developed an in vitro platform combining a CMOS-based high-density microelectrode array with a polydimethylsiloxane (PDMS) guiding microstructure that captures the electrophysiological responses of nociceptors. Human induced pluripotent stem cell-derived (iPSC) nociceptors were cultured at low density with axons distributed through parallel 4 x 10 {micro}m microchannels exiting the seeding well before converging to a bigger axon-collecting channel. This configuration allowed the measurement of stimulation-induced responses of individual axons. Nociceptors were found to exhibit a great diversity of electrophysiological response profiles that can be classified into different functional archetypes. Moreover, we show that some responses are affected by applying the TRPV1 agonist capsaicin. Overall, results using our platform demonstrate that we were able to distinguish nociceptive axons from different subtypes. The platform provides a promising tool for screening potential candidates for nociceptor-specific drugs.

bioengineering↗

bioRxiv2024

Inkube: An all-in-one solution for neuron culturing, electrophysiology, and fluidic exchange

Culturing neuronal networks in vitro is a tedious and time-consuming endeavor. In addition, how the composition of the culture medium and environmental variables such as temperature, osmolarity, and pH affect the spiking behavior of neuronal cultures is difficult to study using electrophysiology. In this work, we present "inkube", an incubation system that has been combined with an electrophysiology setup and a fully automatic perfusion system. This setup allows for the precise measurement and control of the temperature of up to 4 microelectrode arrays (MEAs) in parallel. In addition, neuronal activity can be electrically induced and recorded from the MEAs. inkube can continuously monitor the medium level to automatically readjust osmolarity. Using inkubes unique capability to precisely control the environmental variables of a neural culture, we found that medium evaporation influences the spiking response. Moreover, decreasing medium temperature by only 1.5{degrees}C significantly affected spike latency, a measure commonly used to show plasticity in in vitro experiments. We finally provide a proof-of-concept experiment for drug screening applications, where inkube automatically and precisely varies the concentration of magnesium ions in the medium. Given its high level of autonomy, the system can record, stimulate, and control the medium continuously without user intervention. Both the hardware and the software of inkube are completely open-source. HighlightsO_LILow-cost, open-hardware/open-software electrophysiology setup C_LIO_LIFull incubation solution: Temperature, CO2, and humidity control C_LIO_LIPerfusion system for automatic fluidic exchange and drug testing with volume feedback C_LI

bioengineering↗

bioRxiv2024

Constructing well-defined neural networks of multiple cell types by picking and placing of neuronal spheroids using FluidFM

Controlled placement of single cells, spheroids and organoids is important for in vitro research, especially for bottom-up biology and for lab-on-a-chip and organ-on-a-chip applications. This study utilised FluidFM technology in order to automatically pick and place neuronal spheroids and single cells. Both single cells and spheroids of interest could be selected using light microscopy or fluorescent staining. A process flow was developed to automatically pick and pattern these neurons on flat surfaces, as well as to deposit them into polydimethylsiloxane microstructures on microelectrode arrays. It was shown that highly accurate and reproducible neuronal circuits can be built using the FluidFM automated workflow.

neuroscience↗

bioRxiv2024

An implantable biohybrid nerve model towards synaptic deep brain stimulation

Restoring functional vision in blind patients lacking a healthy optic nerve requires bypassing retinal circuits, ideally, by directly stimulating the visual thalamus. However, available deep brain stimulation electrodes do not provide the resolution required for vision restoration. We developed an implantable biohybrid nerve model designed for synaptic stimulation of deep brain targets. The interface combines a stretchable stimulation array with an aligned microfluidic axon guidance system seeded with neural spheroids to facilitate the development of a 3 mm long nerve-like structure. A bioresorbable hydrogel nerve conduit was used as a bridge between the tissue and the biohybrid implant. We demonstrated stimulation of spheroids within the biohybrid structure in vitro and used high-density CMOS microelectrode arrays to show faithful activity conduction across the device. Finally, implantation of the biohybrid nerve onto the mouse cortex showed that neural spheroids grow axons in vivo and remain functionally active for more than 22 days post-implantation.

bioengineering↗

bioRxiv2024

A modular and flexible open source cell incubator system for mobile and stationary use

Culturing living cells in vitro requires the maintenance of physiological conditions for extended periods of time. Here, we introduce a versatile and affordable incubation system, addressing the limitations of traditional incubation systems. Conventionally, stationary cell incubators maintain constant temperature and gas levels for in vitro cell culturing. Combining such incubators with additional lab equipment proves challenging. The presented platform offers modularity and adaptability, enabling customization to diverse experimental needs. The system includes a main unit with a user-friendly interface as well as an interchangeable incubation chamber. We present two incubation chambers targeting two completely different use cases. The first chamber, named "inkugo" facilitates the transportation of cells for up to two hours without external power and for more than a day without an external CO2 source. The second chamber termed "inkubox" was designed to enable continuous electrophysiological recordings. Recordings from up to four neural cultures growing on high-density microelectrode arrays can be performed in parallel. The systems unique feature lies in its separability of control and incubation components, allowing one control unit to manage various custom chambers. The designs simplicity and the use of widely accessible components make the here proposed incubation system replicable for any laboratory. This platform fosters collaboration and experimentation in both decentralized and traditional laboratory settings, making it an invaluable addition to any cell culturing pipeline. Specifications table O_TBL View this table: org.highwire.dtl.DTLVardef@2c755borg.highwire.dtl.DTLVardef@ccd382org.highwire.dtl.DTLVardef@1522f81org.highwire.dtl.DTLVardef@ace0aeorg.highwire.dtl.DTLVardef@1d2e4c8_HPS_FORMAT_FIGEXP M_TBL C_TBL

cell biology↗

bioRxiv2024

Engineering an in vitro retinothalamic nerve model

Understanding the retinogeniculate pathway in vitro can offer insights into its development and potential for future therapeutic applications. This study presents a Polydimethylsiloxane-based two-chamber system with axon guidance channels, designed to replicate unidirectional retinogeniculate signal transmission in vitro. The system enables the formation of up to 20 identical functional retinothalamic networks on a single transparent microelectrode array. Using embryonic rat retinas, we developed a model where retinal spheroids innervate thalamic targets through up to 6 mm long microfluidic channels. We found that network integrity depends on channel length, with 0.5-2 mm channels maintaining over 90 % morphological and 40 % functional integrity. A reduced network integrity was recorded in longer channels. The results indicate a notable reduction in forward spike propagation in channels longer than 4 mm. Additionally, spike conduction fidelity decreased with increasing channel length. Yet, stimulation-induced thalamic target activity remained unaffected by channel length. Finally, we assessed the impact of stimulation frequency and channel length on the sustainability of the thalamic target spheroid response. The study found that a sustained thalamic calcium response could be elicited with stimulation frequencies up to 31 Hz, with higher frequencies leading to transient responses. In conclusion, this study shows how channel length affects retina to brain network formation and signal transmission in vitro.

neuroscience↗

bioRxiv2022

Engineering circuits of human iPSC-derived neurons and rat primary glia

Novel in vitro platforms based on human neurons are needed to improve early drug testing and address the stalling drug discovery in neurological disorders. Topologically controlled circuits of human induced pluripotent stem cell (iPSC)-derived neurons have the potential to become such a testing system. In this work, we build in vitro co-cultured circuits of human iPSC-derived neurons and rat primary glial cells using microfabricated polydimethylsiloxane (PDMS) structures on microelectrode arrays (MEAs). Such circuits are created by seeding either dissociated cells or pre-aggregated spheroids at different neuron-to-glia ratios. Furthermore, an antifouling coating is developed to prevent axonal overgrowth in undesired locations of the microstructure. We assess the electrophysiological properties of different types of circuits over more than 50 days, including their stimulation-induced neural activity. Finally, we demonstrate the effect of magnesium chloride on the electrical activity of our iPSC circuits as a proof-of-concept for screening of neuroactive compounds.

neuroscience↗

bioRxiv2021

Engineered biological neural networks on high density CMOS micro electrode arrays

In bottom-up neuroscience, questions on neural information processing are addressed by engineering small but reproducible biological neural networks of defined network topology in vitro. The network topology can be controlled by culturing neurons within polydimethylsiloxane (PDMS) microstructures that are combined with microelectrode arrays (MEAs) for electric access to the network. However, currently used glass MEAs are limited to 256 electrodes and pose a limitation to the spatial resolution as well as the design of more complex microstructures. The use of high density complementary metal-oxide-semiconductor (CMOS) MEAs greatly increases the spatiotemporal resolution, enabling sub-cellular readout and stimulation of neurons in defined neural networks. Unfortunately, the non-planar surface of CMOS MEAs complicates the attachment of PDMS microstructures. To overcome the problem of axons escaping the microstructures through the ridges of the CMOS MEA, we stamp-transferred a thin film of hexane-diluted PDMS onto the array such that the PDMS filled the ridges at the contact surface of the microstructures without clogging the axon guidance channels. Moreover, we provide an impedance-based method to visualize the exact location of the microstructures on the MEA and show that our method can confine axonal growth within the PDMS microstructures. Finally, the high spatiotemporal resolution of the CMOS MEA enabled us to show that we can guide action potentials using the unidirectional topology of our circular multi-node microstructure.

neuroscience↗

bioRxiv2021

Topologically controlled circuits of human iPSC-derived neurons for electrophysiology recordings

Bottom-up neuroscience, which consists of building and studying controlled networks of neurons in vitro, is a promising method to investigate information processing at the neuronal level. However, in vitro studies tend to use cells of animal origin rather than human neurons, leading to conclusions that might not be generalizable to humans and limiting the possibilities for relevant studies on neurological disorders. Here we present a method to build arrays of topologically controlled circuits of human induced pluripotent stem cell (iPSC)-derived neurons. The circuits consist of 4 to 50 neurons with mostly unidirectional connections, confined by microfabricated polydimethylsiloxane (PDMS) membranes. Such circuits were characterized using optical imaging and microelectrode arrays (MEAs). Electrophysiology recordings were performed on circuits of human iPSC-derived neurons for at least 4.5 months. We believe that the capacity to build small and controlled circuits of human iPSC-derived neurons holds great promise to better understand the fundamental principles of information processing and storing in the brain.

neuroscience↗