Biology subjects

Cosgrove, D. J.

Publications and source records attributed to Cosgrove, D. J..

10 recordsLinked to original sources

bioRxiv2026

Preserving Native Cellulose-Xylan Architecture Enables Structure-Property Control in Holocellulose Nanofibrils and High-Performance Sustainable Materials

The hierarchical organization of cellulose microfibrils and their intimate interactions with hemicelluloses such as xylan underpin the exceptional mechanical performance of plant cell walls. However, translating these biological design principles into sustainable nanocellulosic materials remains limited by conventional cellulose nanofibril production routes, which rely on harsh chemical treatments that disrupt the native cellulose-hemicellulose architecture. Here, we present an optimized isolation strategy for holocellulose nanofibrils (hCNFs) that preserves native cellulose structure, xylan substitution and conformation, and cellulose-xylan interactions. Using wild-type Arabidopsis thaliana, a xylan glucuronidation-deficient gux1/2 mutant, and Brassica napus straw as model systems, we systematically elucidate how xylan content and substitution pattern govern nanofibril isolation, interfacial interactions, and macroscopic properties. Two-dimensional 13C magic-angle spinning NMR demonstrates retention of native cellulose glucosyl environments, the presence of two-fold and three-fold helical xylan conformations, and cellulose-associated two-fold helical xylan. Cryogenic transmission electron microscopy reveals fibril widths of [~]3 nm, consistent with elementary cellulose I{beta} microfibrils. We show that xylan glucuronidation regulates colloidal stability, hydration behavior, and interfibrillar cohesion, whereas xylan content controls nanofibrillation efficiency. These multiscale structural features translate directly into moisture sorption, thermal behavior, and mechanical performance. Notably, Brassica napus hCNF films exhibit exceptional strength and extensibility, surpassing many chemically modified CNF systems. This work demonstrates that preserving the native cellulose-hemicellulose architecture enables high-performance, sustainable nanocellulosic materials without chemical reconstruction.

biochemistry↗

bioRxiv2026

Tip growth of root hairs reveals functional divergence of plant expansins

Plant cell wall expansion is essential for plant growth, with expansins promoting wall loosening and creep during diffuse growth. Expansins role in tip growth, such as root hair elongation, is less clear. Here we used CRISPR/Cas9 to knock out root-hair specific -expansins EXPA7 and EXPA18 in Arabidopsis thaliana, abolishing root hair elongation. Complementation with expansin genes from various clades (driven by the EXPA7 promoter) revealed functional differences: some fully restored root hair growth, others only partially restored growth, while others failed, notably two EXPA clades [clade-VIII (EXPA13) and clade-IX (EXPA20)] lacking a conserved Asp considered essential for expansin-induced wall enlargement. Phylogenetic analysis indicated loss of this Asp predated angiosperms. Mutation of this Asp in EXPA7 confirmed its necessity for wall loosening. Members of the other expansin families (EXPB, EXLA and EXLB) failed to restore root hair growth. Chimeric fusions of EXPAs with mCherry revealed differences in trafficking patterns and wall binding among EXPA clades. These results demonstrate functional differences among expansin families and among EXPA clades and demonstrate a genetic platform to analyze functionalities (trafficking, wall binding, wall extension) of EXPA and other wall-modifying proteins during root-hair tip growth. Significance StatementPlant cells can enlarge >100-fold during growth, a process controlled by proteins called expansins. Plants have many expansin proteins that are difficult to study in isolation and whose specific activities and properties have remained elusive. Here, we engineered a root-hairless Arabidopsis mutant as a genetic platform to assess expansin activity in vivo. By introducing various expansins with a fluorescent tag into this mutant, we uncovered an unexpected functional diversity across the expansin superfamily. While some expansins successfully restored root hair growth, others failed, potentially due to differences in protein trafficking, cell wall binding, or evolutionary loss of critical residues required for wall loosening. These findings point to a divergence of expansin functions during >140 million years of plant evolution.

plant biology↗

bioRxiv2026

Collective microfibril sliding underlies plant cell wall creep

Plant cell growth depends on slow, irreversible creep of the fibrous cell wall stretched by turgor, yet the mechanics of creep--and how it differs from elasto-plastic deformation--remains uncertain1-3. Using multiscale modeling, we show how wall creep emerges from elementary sliding of cellulose microfibrils along their contact interfaces. A dominant sliding mode involves localized dislocation-like defects that stochastically nucleate at laterally bonded microfibril contacts and then glide along the interface by surmounting discrete energy barriers. Embedding these sliding events into Monte Carlo simulations of stretched cellulose networks recapitulates whole-wall creep kinetics. Elevated stress lowers sliding energy barriers and triggers rapid irreversible deformation characteristic of plastic flow. Compared with elasto-plastic stretching, creep induces less microfibril reorientation but promotes bundling, thereby reducing subsequent yielding. These results clarify the microfibril rearrangements underlying cell wall creep and show how they redistribute stress to permit sustained wall expansion at steady turgor without compromising structural integrity.

biophysics↗

bioRxiv2025

Synthetic pectin-cellulose nanofiber capsule provides minimal model capturing mechanics of a regenerating plant cell wall

Plant primary cell walls are dynamic supramolecular assemblies composed of layered cellulose, hemicellulose and pectin, progressively built through synthesis and secretion. However, the specific architectural features and structural components sufficient to endow the mechanical properties of the wall remain unclear. Here, we construct a minimal synthetic spherical shell and compare its structural and mechanical properties to those of a plant single-cell system. To eliminate complexities from intercellular connectivity and developmental history, we exploit the ability of plant protoplasts to regenerate cell walls de novo. Compression tests of regenerating protoplasts between parallel plates reveal that wall stiffness increases with wall thickening over time. Despite differences in assembly pathways, architecture, and composition, the synthetic shell exhibits a similar thickness-dependent modulus and similar material stiffness. The synthetic shell, composed of pectin and cellulose layers, mirrors the mechanical behavior of regenerating primary cell walls, suggesting that these components are sufficient to confer key viscoelastic properties in the limit of small deformations. Given the complexity of natural plant cell walls, the synthetic analogue offers a controllable platform to dissect the mechanical contributions of individual wall components.

plant biology↗

bioRxiv2025

Emergence of Lignin-Carbohydrate Interactions During Plant Stem Maturation Visualized by Solid-State NMR

Lignification waterproofs and strengthens the secondary plant cell wall, while increasing the energy cost associated with releasing sugars for biofuel production. The physical association between lignin and the carbohydrate scaffold that accommodates lignin polymerization, as well as the temporally distinct roles of different lignin units and carbohydrate partners during lignification, remain largely unclear. Here we map the lignin-carbohydrate interactions by solid-state NMR in 13C-labeled Arabidopsis inflorescence stems as secondary cell walls are formed. Analysis includes wild-type and two mutants that either selectively or globally disrupt lignin biosynthesis. Mature cell walls in the basal regions of older stems are enriched in S-lignin and carbohydrate-lignin interactions. Acetylated xylan is the dominant mediator of interactions with S-lignin, while methylated pectin unexpectedly interacts with G-lignin during early-stage lignification. The critical role of S-lignin in stabilizing carbohydrate-lignin interface is emphasized by the weak lignin-carbohydrate interactions and compromised mechanical properties of a low-S fah1 mutant, whereas the ref3 mutant, with low overall lignin content but a higher S/G ratio, remained unaffected. These findings demonstrate that the molecular mixing pattern, rather than lignin content, is a key determinant of the structure and properties of lignocellulosic materials.

biophysics↗

bioRxiv2023

Single-molecule tracking reveals dual front door/back door inhibition of Cel7A cellulase by its product cellobiose

Degrading cellulose is a key step in the processing of lignocellulosic biomass into bioethanol. Cellobiose, the disaccharide product of cellulose degradation, has been shown to inhibit cellulase activity, but the mechanisms underlying product inhibition are not clear. We combined single-molecule imaging and biochemical investigations with the goal of revealing the mechanism by which cellobiose inhibits the activity of Trichoderma reesei Cel7A, a well-characterized exo-cellulase. We find that cellobiose slows the processive velocity of Cel7A and shortens the distance moved per encounter; effects that can be explained by cellobiose binding to the product release site of the enzyme. Cellobiose also decreases the binding rate of Cel7A to immobilized cellulose but does not slow the binding rate of an isolated carbohydrate-binding module, suggesting that cellobiose inhibits binding of the catalytic domain of Cel7A to cellulose. In support of this, cellopentaose, which is considerably larger than cellobiose, also slows the binding rate of Cel7A to cellulose without affecting the velocity and run length. Together, these results suggest that cellobiose inhibits Cel7A activity both by binding to the back door product release site to slow activity and to the front door substrate binding tunnel to inhibit interaction with cellulose. These findings point to new strategies for engineering cellulases to reduce product inhibition and enhance cellulose degradation, supporting the growth of a sustainable bioeconomy. SignificanceCellulose, a polymer of repeating glucose subunits, is the primary component of plant cell walls. A promising route to reducing petrochemical use is digesting plant biomass to glucose and fermenting glucose to bioethanol. Cel7A is a model cellulase enzyme that degrades cellulose from one end to generate the disaccharide product, cellobiose. Because industrial-scale bioethanol generation generates high concentrations of cellobiose, product inhibition is a significant concern. We investigated product inhibition of Cel7A by cellobiose at the single-molecule level and found that cellobiose both slows the movement of Cel7 along cellulose and inhibits the initial binding of Cel7 to cellulose. These results suggest that cellobiose binds to the enzyme at more than one site and achieves its inhibition by multiple mechanisms.

plant biology↗

bioRxiv2022

Loosenin-like proteins from Phanerochaete carnosa impact both cellulose and chitin fiber networks

Microbial expansin-related proteins are ubiquitous across bacterial and fungal organisms, and reportedly play a role in the modification and deconstruction of cell wall polysaccharides including lignocellulose. So far, very few microbial expansin related proteins, including loosenins and loosenin-like (LOOL) proteins, have been functionally characterized. Herein, four LOOLs encoded by Phanerochaete carnosa and belonging to different subfamilies (i.e., PcaLOOL7 and PcaLOOL9 from subfamily A; PcaLOOL2 and PcaLOOL12 from subfamily B) were recombinantly produced and the purified proteins were characterized using diverse cellulose and chitin substrates. Whereas all of the purified PcaLOOLs weakened cellulose filter paper and cellulose nanofibril networks (CNF), none significantly boosted cellulase activity on the selected cellulose substrates (Avicel and Whatman paper). Binding of PcaLOOLs to alpha-chitin was higher than to cellulose (Avicel), and highest at pH 5.0. Notably, whereas PcaLOOL9 reduced the yield strain of chitin nanofibrils (ChNF) in a protein-dose dependent manner, the reverse pattern was observed for PcaLOOL7 despite belonging to the same LOOL subfamily. The current study reveals the potential of microbial expansin-related proteins to impact both cellulose and chitin networks, and provides further evidence pointing to a non-lytic mode of action.

microbiology↗

bioRxiv2021

Saccharide Analysis of Onion Outer Epidermal Walls

BackgroundEpidermal cell walls have special structural and biological roles in the life of the plant. Typically they are multi-ply structures encrusted with waxes and cutin which protect the plant from dehydration and pathogen attack. These characteristics may also reduce chemical and enzymatic deconstruction of the wall for sugar analysis and conversion to biofuels. We have assessed the saccharide composition of the outer epidermal wall of onion scales with different analytical methods. This wall is a particularly useful model for cell wall imaging and mechanics. ResultsEpidermal walls were depolymerized by acidic methanolysis combined with 2 M trifluoracetic acid hydrolysis and the resultant sugars were analyzed by high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD). Total sugar yields based on wall dry weight were low (53%). Removal of waxes with chloroform increased the sugar yields to 73% and enzymatic digestion did not improve these yields. Analysis by gas chromatography/mass spectrometry (GC/MS) of per-O-trimethylsilyl (TMS) derivatives of the sugar methyl glycosides produced by acidic methanolysis gave a high yield for galacturonic acid (GalA) but glucose (Glc) was severely reduced. In a complementary fashion, GC/MS analysis of methyl alditols produced by permethylation gave substantial yields for glucose and other neutral sugars, but GalA was severely reduced. Analysis of the walls by 13C solid-state NMR confirmed and extended these results and revealed 15% lipid content after chloroform extraction (potentially cutin and unextractable waxes). ConclusionsAlthough exact values vary with the analytical method, our best estimate is that polysaccharide in the outer epidermal wall of onion scales is comprised of homogalacturonan (~50%), cellulose (~20%), galactan (~10%), xyloglucan (~10%) and smaller amounts of other polysaccharides. Low yields of specific monosaccharides by some methods may be exaggerated in epidermal walls impregnated with waxes and cutin and call for cautious interpretation of the results.

plant biology↗

bioRxiv2019

Pectin methylesterase selectively softens the onion epidermal wall yet reduces acid-induced creep

De-esterification of homogalacturonan (HG) is thought to stiffen pectin gels and primary cell walls by increasing calcium crosslinking between HG chains. Contrary to this idea, recent studies found that HG de-esterification correlated with reduced stiffness of living tissues, measured by surface indentation. The physical basis of such apparent wall softening is unclear, but possibly involves complex biological responses to HG modification. To assess the direct physical consequences of HG de-esterification on wall mechanics without such complications, we treated isolated onion (Allium cepa) epidermal walls with pectin methylesterase (PME) and assessed wall biomechanics with indentation and tensile tests. In nanoindentation assays, PME action softened the wall (reduced the indentation modulus). In tensile force/extension assays, PME increased plasticity, but not elasticity. These softening effects are attributed, at least in part, to increased electrostatic repulsion and swelling of the wall after PME treatment. Despite softening and swelling upon HG de-esterification, PME treatment alone failed to induce cell wall creep. Instead, acid-induced creep, mediated by endogenous expansin, was reduced. We conclude that HG de-esterification physically softens the onion wall, yet reduces expansin-mediated wall extensibility. HighlightAfter enzymatic de-esterification without added calcium, the onion epidermal wall swells and becomes softer, as assessed by nanoindentation and tensile plasticity tests, yet exhibits reduced expansin-mediated creep.

plant biology↗

bioRxiv2019

From morphogenesis to pathogenesis: A cellulose loosening protein is one of the most widely distributed tools in nature

Plants must rearrange the network of complex carbohydrates in their cell walls during normal growth and development. To accomplish this, all plants depend on proteins called expansins that non-enzymatically loosen hydrogen bonds between cellulose microfibrils. Because of their key role in cell wall extension during growth, expansin genes are ubiquitous, diverse, and abundant throughout all land plants. Surprisingly, expansin genes have more recently been found in some bacteria and microbial eukaryotes, where their biological functions are largely unknown. Here, we reconstruct the phylogeny of microbial expansin genes. We find these genes in all eukaryotic microorganisms that have structural cellulose in their cell walls, suggesting expansins evolved in ancient marine microorganisms long before the evolution of land plants. We also find expansins in an unexpectedly high phylogenetic diversity of bacteria and fungi that do not have cellulosic cell walls. These bacteria and fungi with expansin genes inhabit varied ecological contexts mirroring the diversity of terrestrial and aquatic niches where plant and/or algal cellulosic cell walls are present. The microbial expansin phylogeny shows evidence of multiple horizontal gene transfer events within and between bacterial and eukaryotic microbial lineages, which may in part underlie their unusually broad phylogenetic distribution. Taken together, we find expansins to be unexpectedly widespread in both bacterial and eukaryotic genetic backgrounds, and that the contribution of these genes to bacterial and fungal ecological interactions with plants and algae has likely been underappreciated.\n\nImportanceCellulose is the most abundant biopolymer on earth. In plant cell walls, where most global cellulose biomass is found, cellulose microfibrils occur intertwined with hemicelluloses and pectins. The rigidity of this polysaccharide matrix provides plant cell walls with structural support, but this rigidity also restricts cellular growth and development. Irreversible, non-enzymatic loosening of structural carbohydrates by expansin proteins is key to successful cell wall growth in plants and green algae. Here, we find that expansin genes are distributed far more broadly throughout diverse bacterial and fungal lineages lacking cellulosic cell walls than previously known. Multiple horizontal gene transfer events are in part responsible for their unusually wide phylogenetic distribution. Together, these results suggest that in addition to being the key evolutionary innovation by which eukaryotes remodel structural cellulose in their cell walls, expansins likely have remarkably broad and under-recognized utility for microbial species that interact with plant and algal structural cellulose in diverse ecological contexts.

evolutionary biology↗