Biology subjects

Alioglu, M. A.

Publications and source records attributed to Alioglu, M. A..

5 recordsLinked to original sources

bioRxiv2023

Intraoperative Bioprinting of Human Adipose-derived Stem cells and Extra-cellular Matrix Induces Hair Follicle-Like Downgrowths and Adipose Tissue Formation during Full-thickness Craniomaxillofacial Skin Reconstruction

Craniomaxillofacial (CMF) reconstruction is a challenging clinical dilemma. It often necessitates skin replacement in the form of autologous graft or flap surgery, which differ from one another based on hypodermal/dermal content. Unfortunately, both approaches are plagued by scarring, poor cosmesis, inadequate restoration of native anatomy and hair, alopecia, donor site morbidity, and potential for failure. Therefore, new reconstructive approaches are warranted, and tissue engineered skin represents an exciting alternative. In this study, we demonstrated the reconstruction of CMF full-thickness skin defects using intraoperative bioprinting (IOB), which enabled the repair of defects via direct bioprinting of multiple layers of skin on immunodeficient rats in a surgical setting. Using a newly formulated patient-sourced allogenic bioink consisting of both human adipose-derived extracellular matrix (adECM) and stem cells (ADSCs), skin loss was reconstructed by precise deposition of the hypodermal and dermal components under three different sets of animal studies. adECM, even at a very low concentration such as 2% or less, has shown to be bioprintable via droplet-based bioprinting and exhibited de novo adipogenic capabilities both in vitro and in vivo. Our findings demonstrate that the combinatorial delivery of adECM and ADSCs facilitated the reconstruction of three full-thickness skin defects, accomplishing near-complete wound closure within two weeks. More importantly, both hypodermal adipogenesis and downgrowth of hair follicle-like structures were achieved in this two-week time frame. Our approach illustrates the translational potential of using human-derived materials and IOB technologies for full-thickness skin loss.

bioengineering↗

bioRxiv2023

Nested biofabrication: Matryoshka-inspired Intra-embedded Bioprinting

Engineering functional tissues and organs remains a fundamental pursuit in biofabrication. However, the accurate constitution of complex shapes and internal anatomical features of specific organs, including their intricate blood vessels and nerves, remains a significant challenge. Inspired by the Matryoshka doll, we here introduce a new method called Intra-Embedded Bioprinting (IEB), building upon existing embedded bioprinting methods. We used a xanthan gum-based material, which served a dual role as both a bioprintable ink and a support bath, due to its unique shear-thinning and self-healing properties. We demonstrated IEBs capabilities in organ modelling, creating a miniaturized replica of a pancreas using a photocrosslinkable silicone composite. Further, a head phantom and a Matryoshka doll were 3D printed, exemplifying IEBs capability to manufacture intricate, nested structures. Towards the use case of IEB and employing innovative coupling strategy between extrusion-based and aspiration-assisted bioprinting, we developed a breast tumor model that included a central channel mimicking a blood vessel, with tumor spheroids bioprinted in proximity. Validation using a clinically-available chemotherapeutic drug illustrated its efficacy in reducing the tumor volume via perfusion over time. This method opens a new way of bioprinting enabling the creation of complex-shaped organs with internal anatomical features.

bioengineering↗

bioRxiv2023

A 3D Printed Ventilated Perfused Lung Model Platform to Dissect the Lung's Response to Viral Infection in the Presence of Respiration

In this study, we developed a three-dimensionally (3D) printed lung model that faithfully recapitulates the intricate lung environment. This 3D model incorporated alveolar and vascular components that allow for a comprehensive exploration of lung physiology and responses to infection in vitro. In particular, we investigated the intricate role of ventilation on formation of the alveolar epithelial layer and its response to viral infections. In this regard, we subjected our 3D printed, perfused lung model to a continuous respiratory cycle at the air-liquid interface (ALI) for up to 10 days followed by infection with two viruses: influenza virus (Pr8) and respiratory syncytial virus (RSV), at two different concentrations for 24 or 48 h. The results revealed that ventilation induced increased tight-junction formation with better epithelial barrier function over time, facilitated higher expression of alveolar epithelial specific genes, enabled higher level of infection with an increased progression of viral spread and replication over time, and modulated the production of pro-inflammatory cytokines and chemokines. Our findings represent a critical step forward in advancing our understanding of lung-specific viral responses and respiratory infections in response to ventilation, which sheds light on vital aspects of pulmonary physiology and pathobiology.

bioengineering↗

bioRxiv2023

A Versatile Photocrosslinkable Silicone Composite for 3D Printing Applications

Embedded printing has emerged as a valuable tool for fabricating complex structures and microfluidic devices. Currently, an ample of amount of research is going on to develop new materials to advance its capabilities and increase its potential applications. Here, we demonstrate a novel, transparent, 3D printable, photocrosslinkable, and tuneable silicone composite that can be utilized as a support bath or an extrudable ink for embedded printing. The proposed silicone composite can be tuned to achieve ideal rheological properties, such as optimal self-recovery and yield stress, for use in 3D printing. When used as a support bath, it facilitated the generation microfluidic devices with circular channels of diameter up to 30 {micro}m. To demonstrate its utility, flow focusing microfluidic devices were fabricated for generation of Janus microrods, which can be easily modified for multitude of applications. When used as an extrudable ink, 3D printing of complex-shaped micro- and macro-constructs were achieved with integrated electronics, which greatly extends its potential applications towards developing complex flexible parts for soft robotics and prosthetics. Further, its biocompatibility was tested with multiple cell types to validate its applicability for medical and tissue engineering use. Altogether, this material offers a myriad of potential applications in material and medical fields by providing a facile approach to develop complicated 3D structures and interconnected channels that can further advance microfluidics and soft-robotics research.

bioengineering↗

bioRxiv2022

High-throughput microgel biofabrication via air-assisted co-axial jetting for cell encapsulation, 3D bioprinting, and scaffolding applications

Microgels have recently received widespread attention for their applications in a wide array of domains such as tissue engineering, regenerative medicine, and cell and tissue transplantation because of their properties like injectability, modularity, porosity, and the ability to be customized in terms of size, form, and mechanical properties. However, it is still challenging to mass produce microgels with diverse sizes and tunable properties. Herein, we developed an air-assisted co-axial device (ACAD) for continuous production of microgels in a high-throughput manner. To test its robustness, microgels of multiple hydrogels and their combination, including alginate (Alg), gelatin methacrylate (GelMA) and Alg-GelMA, were formed at a maximum production rate of 65,000 microgels per sec while retaining circularity and a size range of 50-500 m based on varying air pressure levels. The ACAD platform allowed single and multiple cell encapsulation with around 75% efficiency. These microgels illustrated appealing rheological properties such as yield stress, viscosity, and shear modulus for bioprinting applications. Specifically, Alg microgels have the potential to be used as a sacrificial support bath while GelMA microgels have potential for direct extrusion both on their own or when loaded in a bulk GelMA hydrogel. Generated microgels showed high cell viability (>90%) and proliferation over 7 days with their increased interactions with cells, particularly for GelMA microgels. The developed strategy provides a facile and rapid approach without any complex or expensive consumables and accessories for scalable high-throughput microgel production for cell therapy, tissue regeneration and 3D bioprinting applications.

bioengineering↗