Biology subjects

AbuOun, M.

Publications and source records attributed to AbuOun, M..

6 recordsLinked to original sources

bioRxiv2022

Plasmid overlap and evolution between Enterobacterales isolates from bloodstream infections and non-human compartments

Plasmids enable the dissemination of antimicrobial resistance (AMR) in common Enterobacterales pathogens, representing a major public health challenge. However, the extent of plasmid sharing and evolution between Enterobacterales causing human infections and other niches remains unclear, including the emergence of resistance plasmids. Dense, unselected sampling is highly relevant to developing our understanding of plasmid epidemiology and designing appropriate interventions to limit the emergence and dissemination of plasmid-associated AMR. We established a geographically and temporally restricted collection of human bloodstream infection (BSI)-associated, livestock-associated (cattle, pig, poultry, and sheep faeces, farm soils) and wastewater treatment work (WwTW)-associated (influent, effluent, waterways upstream/downstream of effluent outlets) Enterobacterales. Isolates were collected between 2008-2020 from sites <60km apart in Oxfordshire, UK. Pangenome analysis of plasmid clusters revealed shared "backbones", with phylogenies suggesting an intertwined ecology where well-conserved plasmid backbones carry diverse accessory functions, including AMR genes. Many plasmid "backbones" were seen across species and niches, raising the possibility that plasmid movement between these followed by rapid accessory gene change could be relatively common. Overall, the signature of identical plasmid sharing is likely to be a highly transient one, implying that plasmid movement might be occurring at greater rates than previously estimated, raising a challenge for future genomic One Health studies. FundingThis study was funded by the Antimicrobial Resistance Cross-council Initiative supported by the seven research councils and the NIHR, UK.

genomics↗

bioRxiv2021

Discordance between different bioinformatic methods for identifying resistance genes from short-read genomic data, with a focus on Escherichia coli

2.Several bioinformatics genotyping algorithms are now commonly used to characterise antimicrobial resistance (AMR) gene profiles in whole genome sequencing (WGS) data, with a view to understanding AMR epidemiology and developing resistance prediction workflows using WGS in clinical settings. Accurately evaluating AMR in Enterobacterales, particularly Escherichia coli, is of major importance, because this is a common pathogen. However, robust comparisons of different genotyping approaches on relevant simulated and large real-life WGS datasets are lacking. Here, we used both simulated datasets and a large set of real E. coli WGS data (n=1818 isolates) to systematically investigate genotyping methods in greater detail. Simulated constructs and real sequences were processed using four different bioinformatic programs (ABRicate, ARIBA, KmerResistance, and SRST2, run with the ResFinder database) and their outputs compared. For simulations tests where 3,079 AMR gene variants were inserted into random sequence constructs, KmerResistance was correct for 3,076 (99.9%) simulations, ABRicate for 3,054 (99.2%), ARIBA for 2,783 (90.4%) and SRST2 for 2,108 (68.5%). For simulations tests where two closely related gene variants were inserted into random sequence constructs, KmerResistance the correct alleles in 35,338/46,318 (76.3%) ABRicate identified in 11,842/46,318 (25.6%) of simulations, ARIBA in 1679/46,318 (3.6%), and SRST2 in 2000/46,318 (4.3%). In real data, across all methods, 1392/1818 (76%) isolates had discrepant allele calls for at least one gene. Our evaluations revealed poor performance in scenarios that would be expected to be challenging (e.g. identification of AMR genes at <10x coverage, discriminating between closely related AMR gene sequences), but also identified systematic sequence classification (i.e. naming) errors even in straightforward circumstances, which contributed to 1081/3092 (35%) errors in our most simple simulations and at least 2530/4321 (59%) discrepancies in real data. Further, many of the remaining discrepancies were likely "artefactual" with reporting cut-off differences accounting for at least 1430/4321 (33%) discrepants. Comparing outputs generated by running multiple algorithms on the same dataset can help identify and resolve these artefacts, but ideally new and more robust genotyping algorithms are needed. 3. Impact statementWhole-genome sequencing is widely used for studying the epidemiology of antimicrobial resistance (AMR) genes in bacteria; however, there is some concern that outputs are highly dependent on the bioinformatics methods used. This work evaluates these concerns in detail by comparing four different, commonly used AMR gene typing methods using large simulated and real datasets. The results highlight performance issues for most methods in at least one of several simulated and real-life scenarios. However most discrepancies between methods were due to differential labelling of the same sequences related to the assumptions made regarding the underlying structure of the reference resistance gene database used (i.e. that resistance genes can be easily classified in well-defined groups). This study represents a major advance in quantifying and evaluating the nature of discrepancies between outputs of different AMR typing algorithms, with relevance for historic and future work using these algorithms. Some of the discrepancies can be resolved by choosing methods with fewer assumptions about the reference AMR gene database and manually resolving outputs generated using multiple programs. However, ideally new and better methods are needed.

microbiology↗

bioRxiv2020

Genomic network analysis of an environmental and livestock IncF plasmid population

IncF plasmids are diverse and of great clinical significance, often carrying genes conferring antimicrobial resistance (AMR) such as extended-spectrum {beta}-lactamases, particularly in Enterobacteriaceae. Organising this plasmid diversity is challenging, and current knowledge is largely based on plasmids from clinical settings. Here, we present a network community analysis of a large survey of IncF plasmids from environmental (influent, effluent, and upstream/downstream waterways surrounding wastewater treatment works) and livestock settings. We use a tractable and scalable methodology to examine the relationship between plasmid metadata and network communities. This reveals how niche (sampling compartment and host genera) partition and shape plasmid diversity. We also perform pangenome-style analyses on network communities. We show that such communities define unique combinations of core genes, with limited overlap. Building plasmid phylogenies based on alignments of these core genes, we demonstrate that plasmid accessory function is closely linked to core gene content. Taken together, our results suggest that stable IncF plasmid backbone structures can persist in environmental settings while allowing dramatic variation in accessory gene content that may be linked to niche adaptation. The recent association of IncF plasmids with AMR likely reflects their suitability for rapid niche adaptation.

bioinformatics↗

bioRxiv2020

Niche and local geography shape the pangenome of wastewater- and livestock-associated Enterobacteriaceae

Escherichia coli and other Enterobacteriaceae are highly diverse species with open pangenomes1,2, where genes move intra- and inter-species via horizontal gene transfer3. These species can cause clinical infections4,5 as well as persist environmentally6,7. Environmental populations have been suggested as important reservoirs of antimicrobial resistance (AMR) genes. However, as most analyses focus on clinical isolates8,9, the pangenome dynamics of natural populations remain understudied, particularly the role of plasmids. Here, we reconstructed near-complete genomes for 828 Enterobacteriaceae, including 553 Escherichia spp. and 275 non-Escherichia species with 2,293 circularised plasmids in total, collected from nineteen locations (livestock farms and wastewater treatment works in the United Kingdom) within a 30km radius at three timepoints over the course of a year. We find different dynamics for the chromosomal and plasmid-borne components of the pangenome, showing that plasmids have a higher burden of both AMR genes and insertion sequences, and AMR plasmids show evidence of being under stronger selective pressure. Focusing on E. coli, we observe that plasmid dynamics are more strongly dominated by niche and local geography, rather than phylogeny or season. Our results highlight the diversity of the AMR reservoir in these species and niches, and the importance of local strategies for controlling the emergence and spread of AMR.

microbiology↗

bioRxiv2019

The impact of sequencing depth on the inferred taxonomic composition and AMR gene content of metagenomic samples

BackgroundShotgun metagenomics is increasingly used to characterise microbial communities, particularly for the investigation of antimicrobial resistance (AMR) in different animal and environmental contexts. There are many different approaches for inferring the taxonomic composition and AMR gene content of complex community samples from shotgun metagenomic data, but there has been little work establishing the optimum sequencing depth, data processing and analysis methods for these samples. In this study we used shotgun metagenomics and sequencing of cultured isolates from the same samples to address these issues. We sampled three potential environmental AMR gene reservoirs (pig caeca, river sediment, effluent) and sequenced samples with shotgun metagenomics at high depth ([~]200 million reads per sample). Alongside this, we cultured single-colony isolates of Enterobacteriaceae from the same samples and used hybrid sequencing (short- and long-reads) to create high-quality assemblies for comparison to the metagenomic data. To automate data processing, we developed an open-source software pipeline, ResPipe.\n\nResultsTaxonomic profiling was much more stable to sequencing depth than AMR gene content. 1 million reads per sample was sufficient to achieve <1% dissimilarity to the full taxonomic composition. However, at least 80 million reads per sample were required to recover the full richness of different AMR gene families present in the sample, and additional allelic diversity of AMR genes was still being discovered in effluent at 200 million reads per sample. Normalising the number of reads mapping to AMR genes using gene length and an exogenous spike of Thermus thermophilus DNA substantially changed the estimated gene abundance distributions. While the majority of genomic content from cultured isolates from effluent was recoverable using shotgun metagenomics, this was not the case for pig caeca or river sediment.\n\nConclusionsSequencing depth and profiling method can critically affect the profiling of polymicrobial animal and environmental samples with shotgun metagenomics. Both sequencing of cultured isolates and shotgun metagenomics can recover substantial diversity that is not identified using the other methods. Particular consideration is required when inferring AMR gene content or presence by mapping metagenomic reads to a database. ResPipe, the open-source software pipeline we have developed, is freely available (https://gitlab.com/hsgweon/ResPipe).

microbiology↗

bioRxiv2019

Comparison of long-read sequencing technologies in the hybrid assembly of complex bacterial genomes

Illumina sequencing allows rapid, cheap and accurate whole genome bacterial analyses, but short reads (<300 bp) do not usually enable complete genome assembly. Long read sequencing greatly assists with resolving complex bacterial genomes, particularly when combined with short-read Illumina data (hybrid assembly). However, it is not clear how different long-read sequencing methods impact on assembly accuracy. Relative automation of the assembly process is also crucial to facilitating high-throughput complete bacterial genome reconstruction, avoiding multiple bespoke filtering and data manipulation steps. In this study, we compared hybrid assemblies for 20 bacterial isolates, including two reference strains, using Illumina sequencing and long reads from either Oxford Nanopore Technologies (ONT) or from SMRT Pacific Biosciences (PacBio) sequencing platforms. We chose isolates from the Enterobacteriaceae family, as these frequently have highly plastic, repetitive genetic structures and complete genome reconstruction for these species is relevant for a precise understanding of the epidemiology of antimicrobial resistance. We de novo assembled genomes using the hybrid assembler Unicycler and compared different read processing strategies. Both strategies facilitate high-quality genome reconstruction. Combining ONT and Illumina reads fully resolved most genomes without additional manual steps, and at a lower consumables cost per isolate in our setting. Automated hybrid assembly is a powerful tool for complete and accurate bacterial genome assembly. IMPACT STATEMENTIllumina short-read sequencing is frequently used for tasks in bacterial genomics, such as assessing which species are present within samples, checking if specific genes of interest are present within individual isolates, and reconstructing the evolutionary relationships between strains. However, while short-read sequencing can reveal significant detail about the genomic content of bacterial isolates, it is often insufficient for assessing genomic structure: how different genes are arranged within genomes, and particularly which genes are on plasmids - potentially highly mobile components of the genome frequently carrying antimicrobial resistance elements. This is because Illumina short reads are typically too short to span repetitive structures in the genome, making it impossible to accurately reconstruct these repetitive regions. One solution is to complement Illumina short reads with long reads generated with SMRT Pacific Biosciences (PacBio) or Oxford Nanopore Technologies (ONT) sequencing platforms. Using this approach, called hybrid assembly, we show that we can automatically fully reconstruct complex bacterial genomes of Enterobacteriaceae isolates in the majority of cases (best-performing method: 17/20 isolates). In particular, by comparing different methods we find that using the assembler Unicycler with Illumina and ONT reads represents a low-cost, high-quality approach for reconstructing bacterial genomes using publicly available software. DATA SUMMARYRaw sequencing data and assemblies have been deposited in NCBI under BioProject Accession PRJNA422511 (https://www.ncbi.nlm.nih.gov/bioproject/PRJNA422511). We confirm all supporting data, code and protocols have been provided within the article or through supplementary data files.

bioinformatics↗